• Journal of the Earthquake Engineering Society of Korea
• /
• v.19 no.6
• /
• pp.257-263
• /
• 2015

Recently two seismic cloaking methods of earthquake engineering have been suggested. One is the seismic wave deflection method that makes the seismic wave bend away and the other is the shadow zone method that makes an area that seismic waves cannot pass through. It is called as seismic cloaking. The fundamental principles of the seismic cloaking by variable refractive index were explained. A two-dimensional cylindrical model which was composed of 40 layers of different density and modulus was tested by numerical simulation. The center region of the model to be protected is called 'cloaked area' and the outer region of it to deflect the incoming wave is called 'cloaking area' or 'cloak area.' As the incoming surface wave is approaching to the cloaking area, the refractive index is decreasing and, therefore, the velocity and impedance are increasing. Then, the wave bends away the cloaked area instead of passing it. Three cases are tested depending on the comparison between the seismic wavelength and the diameter of the cloaked region. The advantage and disadvantage of the method were compared with conventional earthquake engineering method. Some practical requirements for realization in fields were discussed.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.217-221
• /
• 2001

This paper presents a new prototype of soft-switching DC-DC power converter with a high frequency transformer link which has two active power controlled switches in full bridge rectifier with capacitor input type smoothing filter. In this DC-DC converter, ZVS of the inverter in transformer primary side and ZCS of active rectifier area in secondary side can be completely achieved by taking advantage of parasitic inductor component of high-frequency transformer and loss less snubbing capacitors. Its operation principle and salient features are described. The steady-state operating characteristics of the proposed DC-DC power converter are illustrated and discussed on the basis of the simulation results in addition to the experimental ones obtained by 2kw-40kHz power converter breadboard set up.

• Journal of electromagnetic engineering and science
• /
• v.10 no.3
• /
• pp.86-91
• /
• 2010

In this paper, a double-layered frequency selective surface(FSS) superstrate was built and tested. The unit cell of the proposed FSS consists of a ring slot and a dipole-shaped structure and shows a complementary frequency response. Each unit cell is printed on two sides of a substrate. By using these double-layered structures, the first resonant frequency of the pass-band can be lowered. As a result, the size of the unit cell is minimized and the spacing between the other cells is reduced. The proposed FSS-dipole composite antenna is designed for the gain enhancement of wide-band code division multiple access(WCDMA) frequency bands(1.92~2.17 GHz) with a low quality factor(Q=0.17). To verify the gain enhancement performance of the FSS, an FSS-dipole composite antenna was created. Although the FSS layer enhances the gain of the primary radiation source of the dipole antenna, the FSS-dipole complex antenna cannot show a uniform gain over the entire desired frequency band. The experimental results show a gain enhancement of 3 dBi with an FSS superstrate in the WCDMA frequency band.

• Journal of Power Electronics
• /
• v.11 no.2
• /
• pp.163-172
• /
• 2011

Oxidation models of a rotor bar and end ring segment in an induction motor are presented to simulate the behavior of an induction machine working with oxidized rotor parts which are modeled as rotor faults in progress. The leakage inductance and resistance of the rotor parts arc different from normal values because of the oxidation process. The impedance variations modify the current density and magnetic flux which pass through the oxidized parts. Consequently, it causes the rotor asymmetry which induces abnormal harmonics in the stator current spectra of the faulty machine. The leakage inductances of the oxidation models are derived by the Ampere's law. Using the proposed oxidation models, the rotor bar and end ring faults in progress can be modeled and simulated with the motor current signature analysis (MCSA). In addition, the oxidation process of the rotor bar and end ring segment can motivate the rotor asymmetry, which is induced by electromagnetic imbalances, and it is one of the major motor faults. Results of simulations and experiments are compared to each other to verify the accuracy of the proposed models. Experiments are achieved using 3.7 kW, 3-phase, and squirrel cage induction motors with a motor drive inverter.

• Journal of the Korean Society of Safety
• /
• v.21 no.4 s.76
• /
• pp.25-32
• /
• 2006

LonWorks over IP(LonWorks-IP) virtual device network(VDN) is an integrated form of LonWorks device network and IP data network. In especially real-time distributed servo applications on the factory floor, timely response is essential for predictive and preventive maintenance. The time delay in servo control on LonWorks-IP based VDN has highly stochastic nature. LonWorks-IP based VDN induced transmission delay deteriorates the performance and stability of the real-time distributed control system and can't give an effective preventive and predictive maintenance. In order to guarantee the stability and performance of the system, and give an effective preventive and predictive maintenance, LonWorks-IP based VDN induced time-varying uncertain time delay needs to be predicted and compensated. In this paper new Pill control scheme based on Smith predictor, disturbance observer and band pass filter is proposed and tested through computer simulation about position control of DC servo motor. It is shown that how can the proposed control scheme be designed to minimize the effects of uncertain varying time delay and model uncertainties. The validity of the proposed control scheme is compared and demonstrated with the comparison of internal model controllers(IMC) based on Smith predictor with and without disturbance observer.

• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.141-150
• /
• 2017

A rapid increase in traffic accidents involving senior vehicle occupants has been an issue in Korea because of the aging of the population occurring at one of the fastest rates in the world; unfortunately, few studies beyond several looking at the effect of senior occupants on the level of accident injury severity can be found in the literature. A Multinomial logit model was estimated with Newton-Raphson algorithm to perform bias-reducing penalized likelihood optimization. Model covariates integral to developing the model were included, but the main focus was on the interaction of seating position and injury to senior vehicle occupants. It was found that the likelihood of an accident resulting in a fatality increased: 2.2 times for the driver seat, 2.7 times for the front passenger seat, and even 6.7 times for the rear seat. A mandatory seatbelt law to be extended to the rear seat needs to pass the assembly as soon as possible, and government, industry, and safety groups should be encouraged to join forces to strongly carry out targeted campaigns for the wearing of seatbelts in all vehicle seats to enhance the safety of senior occupants as well as other occupants who are vulnerable to road traffic accidents.

• Journal of Distribution Science
• /
• v.18 no.2
• /
• pp.49-58
• /
• 2020

Purpose: This study focuses on the performance of the strategy of Indonesia's companies in facing the development of e-commerce business. The relationship between Knowledge Management (Organizational Memory, Knowledge Sharing, Knowledge Absorption, Knowledge Acceptance), Organizational Innovativeness, Competitive Advantage (Time, Quality, Cost, Flexibility) and E-Commerce (Humanistic Factors: Management, Competence, Organizational Structures) examined in this case study. Research design, data, and methodology: This study uses two types such us qualitative and quantitative. A survey approach were conducted to collect data from the Group of Companies (Director and Manager), Academician (Lecturer), Regulator (Head of Government Institution Division), and Master of Management (at least five years). Total of 114 samples was collected and processed for statistical analysis using Smart PLS. Results: This study provide the findings proved that Knowledge Management and Organization Innovativeness simultaneously have positive influence on Competitive Advantage, while Knowledge Management, Organization Innovativeness, and Competitive Advantage simultaneously have positive influence on E-commerce where Competitive Advantage positively influence to E-commerce. Conclusions: The implementation of strategies or steps in this study are expected to steer and motivate an organization to successfully implement a good knowledge management system to pass on knowledge from generation to generation in the company Organizational Innovativeness strategies to improve e-commerce performance.

• Publications of The Korean Astronomical Society
• /
• v.30 no.3
• /
• pp.789-800
• /
• 2015

During the Joseon dynasty, the Gwansanggam (觀象監, The Royal Astronomical Observatory) was the royal administration in charge of Astronomy (天文), Geography (地理), Calendars (曆), Astronomical and meteorological observation (測候), and Timekeeping (刻漏). Of those affairs, the Astronomical Almanac compilation was most important. In this paper, we study the education and selection of astronomical officials in the 19th century during the Joseon dynasty, focusing on Astronomical Almanac officials. According to this study, their main area was calendar calculation, and they were involved in Astronomical Almanac compilation for nearly 40 years, until they resigned. In addition, they served as Samryeok-susulgwan (三曆修述官, Official for calendar calculation by the $Sh{\acute{i}}xi{\grave{a}}n$ calendar), and Ilgwa-gamingwan (日課監印官, Official printing supervisor). To undertake these core duties, an official had to pass several examinations and courses. The Gwansanggam (after Gwansangso) carried out the educational function for the officials. In particular, reserved officials of the astronomy division had to be educated starting with a trainee course.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.6
• /
• pp.92-98
• /
• 1998

The transform limited optical short pulses are generated by compression of pulses from a gain switched distributed feedback laser at 5 GHz repetition rate. The gain-switched pulses have the minimum pulse width of 27 psec with the spectral width of 1.1 nm. Thus the output pulses have a large amount of linear chirp and nonlinear chirp. We suppress the nonlinear chirp by passing the pulses through the optical band pass filter with 3 dB band width of 0.55 nm which is narrower than spectral width of the input pulses and generate 7.1 psec pulses by compressing the output with the dispersion compensating fiber. The pulses have time-bandwidth product of 0.49 which is close to the transform limited gaussian pulse. These pulses can be utilized as optical sources in 40 Gbit/s time division multiplexed optical transmission system.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.93.2-93.2
• /
• 2012

Point Spread Function (PSF) is one of the most important optical characteristics for describing the performance of a telescope. And a concept of subpixelization is inevitable in evaluating the undersampled PSF (Shin and Sakurai 2009). Then, the internal structure of Yohkoh SXT CCD pixel is not uniform: For the top half of pixel area, the X-ray should pass a so-called gate structure where the charges are transferred to an output amplifier. This gate structure shows energy-dependent sensitivity (Tsuneta et al. 1991). For example, for Al-K (8.34 A) X-ray emission, the transmission of the polysilicon gate is about 0.9. Also, for the peak coronal response of the SXT thin filters, around 17 angstrom (0.729 keV), the transmission of the gate is about 0.6, falling off sharply towards longer wavelengths. It should be noted that this spectrally dependent non-uniform response of each CCD pixel will certainly have a noticeable effect on the properties of the PSF at longer wavelengths. Therefore, especially for analyzing the undersampled PSF of low energy source, a careful consideration of non-uniform internal pixel structure is required in determining the shape of the PSF core. The details on the effect of gate structure will be introduced in our presentation.