• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.534-534
• /
• 2012

최근 집중호우 등으로 인하여 유역에 생산된 토사가 하도에 유입되면서 하상 및 지형변동을 일으키고 있으며, 보 및 댐 상류에서 유사의 퇴적으로 인하여 홍수위 변화와 저수지 기능감소 등 많은 변화를 가져오고 있다. 이로 인하여 댐 및 보의 지속적인 유지관리를 위하여 유사관리 방안이 절실하게 요구되고 있다. 본 연구에서는 낙동강에 건설된 상주보와 구미보를 대상으로 CCHE2D모형을 이용하여 보의 상류에 퇴적된 토사의 토출(배출(排出), SPT)효과를 분석하였다. 토사 토출 효과를 예측하기 위하여 2차원 하상변동 수치모형인 CCHE2D를 이용한 하상변동 과정을 모의한 결과, 보 상류에서는 수문을 통과하여 흐르는 유속으로 인하여 하상이 저하 되었으며, 보 하류에서는 상류에서 유입되는 유사량과 지형적인 영향을 받아 세굴과 퇴적이 반복되는 경향을 보였다. 상류에서 2년빈도 유량, $1,500m^3/s$, $1,000m^3/s$, 풍수량으로 48시간 동안 상주보와 구미보로 유입될 때, 수문이 완전히 열린 상태로 있을 경우에, 상주보와 구미보에서 배사효과를 예측하기 위하여 유사 전달(Sediment delivery)을 분석하였다. 상주보와 구미보에서 배사효과를 예측하기 위하여 유사 전달을 분석한 결과, 상주보는 2년빈도 유량인 $3,857m^3/s$로 48시간 동안 상주보로 유입될 때, 보에서 하류로 전달되는 유사량은 약 4,400 tons 정도로 산정되었다. 유량인 $1,500m^3/s$일 때, 약 2,700 tons이 하류로 전달되지만, 최대 유사전달이 발생되는 지점은 보 하류에서 발생하였다. 풍수량 인 $207.4m^3/s$ 일 때, 1,357 tons이 하류로 전달되며, 최대 유사전달이 발생되는 지점은 상주보에서 발생하였다. 구미보는 2년빈도 유량인 $5,400m^3/s$로 48시간 동안 상주보로 유입될 때, 보에서 하류로 전달되는 유사량은 약 3,216 tons 정도로 산정되었다. 유량이 $1,500m^3/s$일 때, 약 73 tons이 하류로 전달되지만, 최대 유사전달이 발생되는 지점은 보에서 발생하였다. 유량인 $1,000m^3/s$일 때, 약 16 tons이 하류로 전달되며, 풍수량 인 $129.7m^3/s$일 때, 28 tons이 하류로 전달되었다. 상주보와 구미보 상류에서는 유사 전달이 감소하여, 유사가 약간 퇴적되는 경향을 보이지만, 전 구간에 걸쳐서 대체적으로 유사 전달이 크게 변하지 않고 있다. 보 상류를 제외하고는 전제적으로 하상고의 변화가 거의 없이 평형 상태를 유지하고 있는 것을 의미한다. 따라서, 상류에서 2년빈도의 홍수량이 유입될 때, 수문을 완전히 개방할 경우에 배사 효과가 크게 있는 것을 알 수 있다.

• Journal of Korean Society of Transportation
• /
• v.30 no.6
• /
• pp.71-80
• /
• 2012

This research suggested a real-time traffic signal control algorithm using individual vehicle travel times on an isolated signal intersection. To collect IDs and passing times from individual vehicles, space-based surveillance systems such as DSRC were adopted. This research developed models to estimate arrival flow rates, delays, and the change rate in delay, by using individual vehicle's travel time data. This real-time signal control algorithm could determine optimal traffic signal timings that minimize intersection delay, based on a linear programming. A micro simulation analysis using CORSIM and RUN TIME EXTENSION verified saturated intersection conditions, and determined the optimal traffic signal timings that minimize intersection delay. In addition, the performance of algorithm varying according to market penetration was examined. In spite of limited results from a specific scenario, this algorithm turned out to be effective as long as the probe rate exceeds 40 percent. Recently, space-based traffic surveillance systems are being installed by various projects, such as Hi-pass, Advanced Transportation Management System (ATMS) and Urban Transportation Information System (UTIS) in Korea. This research has an important significance in that the propose algorithm is a new methodology that accepts the space-based traffic surveillance system in real-time signal operations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.265-278
• /
• 2016

In this study, an ascending capability experiment was performed with largemouth bass and bluegill, which are exotic fish species inhabiting (the freshwaters) in Korea. The experiment was performed by dividing the subject fish into four groups according to their size and at four flow rates for each group. The number of fish passing through a reference line was analyzed by recording videos, and their swimming and ascending capabilities were observed by the naked eye. The number of fish passing through the reference line did not include those returning downstream within five minutes due to the high flow rate. The flow rate used for the analysis was the mean of the flow rate values measured at the left bank, the right bank, and in the middle of the stream. The results showed that the number of exotic fish migrating upstream decreased as the flow rate increased, regardless of the species and size of the fish. The comparison between the fish species showed that the ascending capability of bass was higher than that of bluegill, but the difference was not significant when considering the difference in the size of the fish. In addition, the upper limit flow velocity allowing the ascending of the exotic fish species was 1.11 m/s, when considering the fish returning to the downstream after the upstream migration and experimental error. The results of the experiment may be used as fundamental data for the blocking of fish and the management of exotic fish species by means of a high flow rate current. Further experiments, verification, and monitoring may need to be conducted continuously to determine whether the fish are able to pass through the reference line at a high flow rate, when they attain a high or cruising velocity. Additionally, the reaction of the fish species should be investigated by considering the response to external forces as well as pressure differences due to the flow rate.

• Journal of Korean language education
• /
• v.28 no.3
• /
• pp.1-24
• /
• 2017

This article explores the developmental history of TOPIK over the last 20 years and its recent trends. Over the last two decades, TOPIK underwent two major systematic reforms, achieving both quantitative and qualitative growth over the course of its 52 testing sessions. TOPIK has utilized a six-level evaluation system from its inception to the present. The evaluation system was amended from the earlier six-test set - whereby each level corresponded with a separate test (1997~2005: the $1^{st}{\sim}9^{th}$) - to the three-test set (2006~2014: the $10^{th}{\sim}34^{th}$), and finally to the two-test set (2014~present: the $35^{th}{\sim}42^{nd}$). In the earlier exams, abilities in Vocabulary Grammar, Writing, Listening, and Reading were assessed. However, beginning with the $35^{th}$ TOPIK, abilities in Listening, Reading, and Writing (only in TOPIK II) were assessed and the evaluation of the writing section was changed to a task-based process, improving TOPIK into a more qualified analysis of proficiency. Over the last 20 years, the number of countries TOPIK is administered in has greatly increased from 4 to 73 countries, and the annual number of test-takers has also significantly increased from 2,692 to 250,141. The distribution of proficiency levels of the test-takers has shifted over time - initially "Beginner>Intermediate>Advanced" in the earlier exams, to "Intermediate>Advanced>Beginner" after the mid 2000s - as the number of those studying the Korean language for specific purposes and continuing education increased. Test-takers have indicated a shift in their purpose for taking the exam, initially citing "to assess proficiency" and more recently selecting "to study abroad," and this could also correlate with changes in the proportion of test-takers' proficiency level. In general, 85~95% of beginner, 50~65% of intermediate, and 45~60% of advanced test applicants passed the respective proficiency level. To date, no practices have yet been implemented to standardize the difficulty level longitudinally across test sets.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.4
• /
• pp.71-84
• /
• 2021

As part of the recent economic revitalization measures, the national level of encouragement for young people's entrepreneurship continues, and investment in young people's entrepreneurship and support from young people are increasing. Entrepreneurship intention is a direct factor leading to entrepreneurship, and many studies have studied the individual characteristics of entrepreneurs that influence entrepreneurial intention. In the same context, the purpose of this study was to investigate the entrepreneur's passion as a factor affecting entrepreneurial intention, divided into harmony passion and obsessive passion. In addition, the pass to need for achievement, emotion, and subjective norms, which are the individual characteristics of entrepreneurs that influence passion, were verified. To this end, an online survey was conducted for prospective entrepreneurs in universities, and data of 203 persons were collected and structural equations were analyzed. As a result of the analysis, it was found that the need for achievement and positive emotions of preliminary entrepreneurs had a positive (+) effect on the passion for harmony, while the negative emotions and subjective norms were not significant for the passion for harmony. The need for achievement had a negative (-) effect on the obsessive passion, and the positive and negative emotions had a positive (+) effect on the obsessive passion, but the subjective norm was not significant on the obsessive passion. It was confirmed that harmony passion and obsessive passion showed positive (+) effect on entrepreneurial intention. It also confirmed whether harmonious passion and obsessive passion have a mediating effect between need for achievement, positive emotion, negative emotion, and entrepreneurial intention. As a result, it has a mediating effect between need for achievement, positive emotion and entrepreneurial intention, especially need for achievement has a complete mediating effect. Obsessive passion was also confirmed to have a mediating effect in the relationship between positive emotions and intention to start a business.

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.28-36
• /
• 2018

There was a difference in recognition of respirators according to the educational performance environment. they were showed higher recognition of respirators of group by internal and external mix trainer, less than 6 months, over 1hour, more than 5 times, variety of education. To identify the relationship between types of job classification(typical and atypical)and the levels of recognition of respirators, a total of 153 workers in a business workplace. mainly, typical workers showed higher recognition of respirators than atypical workers. Training of correct wearing showed high demands both typical and atypical workers. Descriptive statistics(SAS ver 9.2)was performed. the results of recognition of respirators were analyzed the mean and standard deviation by t-test, and anova, fit factor is used geometric means(geometric standard deviation), paired t-test, Wilcoxon analysis(P=0.05). Particulate filtering facepiece respirators (PFFR) is one of the most widely used items of personal protective equipments, and a tight fit of the respirators on the wearers is critical for the protection effectiveness. In order to effectively protect the workers through the respirators, it is important to find and evaluate the ways that can be readily applicable at the workplace to improve the fit of the respirators. This study was designed to evaluate effects of mask style (cup or foldable type) and donning training on fit factors (FF) of the respirators, since these are available at various workplace, especially at small business workplace. A total of 40 study subjects, comprised of employment type workers in metalworking industries, were enrolled in this study. The FF were quantitatively measured before and after training related to the proper donning and use of cup or foldable-type respirators. The pass/fail criterion of FF was set at 100. After the donning training for the cup-type mask, fit test were increased by 769%. but foldable-type mask was also increased after the donning training, the GM of FF for the foldable-type mask and it's increase rate were smaller as compared to the cup-type mask. Furthermore, the differences of the increase rates of the GM of FF in employment type of the subjects were not significantly for the foldable-type mask. These results imply that the raining on the donning and use of PFFR can enhance the protection effectiveness of cup or foldable-type mask, and that the training effects for the foldable-type mask is less significant than that for the cup-type mask. Therefore, it is recommended that the donning training and fit tests should be conducted before the use of the PFFR, and listening to workers opinion regularly.

• Journal of Korean Dental Science
• /
• v.11 no.2
• /
• pp.71-81
• /
• 2018

Purpose: The purpose of this study was to investigate the corrosion behaviors of dental implant alloy after microsized surface modification in electrolytes containing Mn ion. Materials and Methods: $Mn-TiO_2$ coatings were prepared on the Ti-6Al-4V alloy for dental implants using a plasma electrolytic oxidation (PEO) method carried out in electrolytes containing different concentrations of Mn, namely, 0%, 5%, and 20%. Potentiodynamic method was employed to examine the corrosion behaviors, and the alternatingcurrent (AC) impedance behaviors were examined in 0.9% NaCl solution at $36.5^{\circ}C{\pm}1.0^{\circ}C$ using a potentiostat and an electrochemical impedance spectroscope. The potentiodynamic test was performed with a scanning rate of $1.667mV\;s^{-1}$ from -1,500 to 2,000 mV. A frequency range of $10^{-1}$ to $10^5Hz$ was used for the electrochemical impedance spectroscopy (EIS) measurements. The amplitude of the AC signal was 10 mV, and 5 points per decade were used. The morphology and structure of the samples were examined using field-emission scanning electron microscopy and thin-film X-ray diffraction. The elemental analysis was performed using energy-dispersive X-ray spectroscopy. Result: The PEO-treated surface exhibited an irregular pore shape, and the pore size and number of the pores increased with an increase in the Mn concentration. For the PEO-treated surface, a higher corrosion current density ($I_{corr}$) and a lower corrosion potential ($E_{corr}$) was obtained as compared to that of the bulk surface. However, the current density in the passive regions ($I_{pass}$) was found to be more stable for the PEO-treated surface than that of the bulk surface. As the Mn concentration increased, the capacitance values of the outer porous layer and the barrier layer decreased, and the polarization resistance of the barrier layers increased. In the case of the Mn/Ca-P coatings, the corroded surface was found to be covered with corrosion products. Conclusion: It is confirmed that corrosion resistance and polarization resistance of PEO-treated alloy increased as Mn content increased, and PEO-treated surface showed lower current density in the passive region.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.102-108
• /
• 2020

In this paper, we propose a real-time method of detecting hand motions and extracting the signal frame induced by EF(Electric Field) sensors. The signal induced by hand motion includes not only noises caused by various environmental sources as well as sensor's physical placement, but also different initial off-set conditions. Thus, it has been considered as a challenging problem to detect the motion signal and extract the motion frame automatically in real-time. In this study, we remove the PLN(Power Line Noise) using LPF with 10Hz cut-off and successively apply MA(Moving Average) filter to obtain clean and smooth input motion signals. To sense a hand motion, we use two thresholds(positive and negative thresholds) with offset value to detect a starting as well as an ending moment of the motion. Using this approach, we can achieve the correct motion detection rate over 98%. Once the final motion frame is determined, the motion signals are normalized to be used in next process of classification or recognition stage such as LSTN deep neural networks. Our experiment and analysis show that our proposed methods produce better than 98% performance in correct motion detection rate as well as in frame-matching rate.

• Convergence Security Journal
• /
• v.20 no.4
• /
• pp.187-196
• /
• 2020

In order to manage information security risk, various information security level evaluation and information security management system certification have been conducted on a larger scale than ever. However, there are continuous cases of infringement of information protection for companies with excellent information security evaluation and companies with excellent information security management system certification. The existing information security risk management methodology identifies and analyzes risks by identifying information assets inside the information system. Existing information security risk management methodology lacks a review of where cyber threats come from and whether security devices are properly operated for each route. In order to improve the current risk management plan, it is necessary to look at where cyber threats come from and improve the containment level for each inflow section to absolutely reduce unnecessary cyber threats. In addition, it is essential to measure and improve the appropriate configuration and operational level of security equipment that is currently overlooked in the risk management methodology. It is necessary to block and enter cyber threats as much as possible, and to detect and respond to cyber threats that inevitably pass through open niches and use security devices. Therefore, this paper proposes additional evaluation items for evaluating the containment level against cyber threats in the ISMS-P authentication items and vulnerability analysis and evaluation items for major information and communication infrastructures, and evaluates the level of security equipment configuration for each inflow.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.525-532
• /
• 2022

The port of Mokpo operates the largest number of coastal passenger ships and routes in Korea. These coastal passenger ships pass through narrow channels in the south-west coast of Korea owing to the geographical effect. It is difficult to find a research for the safety of the marine traffic environment in the narrow channel used by coastal passenger ship. Therefore, in this study, the navigation safety of the target coastal passenger ship was analyzed in the narrow channel near the port of Mokpo using the Korea design standard for port and harbour facilities. As a result of the analysis, the width of the narrow channel between Maek-island and Dali-island is narrower than 1.5 times of the target ship's length over all, the degree of curvature of the narrow channel exceeds the standard value of 30°, and several fishing gears exist near the narrow channel. Finally, the following were suggested to improve the safety of navigation on the narrow channel: keeping one-way traffic during the day-time, and navigating through the designated fairway during night·visibility restriction·low tide.