• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 센서 박막재료 반도체재료 기술교육
• /
• pp.31-34
• /
• 2002

In this paper, the electric properties of amophous selenium multilayer samples has been investigated. In order to develop the hybrid flat-panel digital· X-ray image detector, we measured and analyzed their performance parameters such as the X -ray sensitivity and dark-current for a amophous selenium multilayers X-ray detector with a phosphor layer, The hybrid digital X-ray image detector can be constructed by integrating a phosphor layer (or a scintillative layer) that convert X-ray to a light on a-Se photoconduction mulilayers that convert a light to electrical signal. As results, the dielectric materials such as parylene between the phosphor layer and the top electrode may reduce the dark-current of the samples. Amorphous selenium multilayers having dielectric layer(parylene) has characteristics of low dark-current, high X-ray sensitivity. So we can acquired a enhanced signal to noise ratio. In this paper offer the method can reduce the dark-current in the hybrid X-ray detector.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.750-753
• /
• 2002

The chemical vapor condensation process of Parylene-N thin films was investigated and applied to the passivation of the organic light emitting diodes (OLEDs). The effects of process variables on the deposition rate were studied, and it was found that the deposition rate of Parylene increases with increasing precursor sublimation temperature but decreases with increasing substrate temperature. The Parylene film was used as a passivation layer for OLEDs, and as a result, the lifetime of the passivated OLEDs was increased by a factor of about 2.3 compared with that of non-passivated OLEDs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 학술대회 및 기술세미나 논문집 디스플레이 광소자
• /
• pp.56-57
• /
• 2006

In this paper, the inorganic multi-layer thin film encapsulation was newly adopted to protect the organic layer from moisture and oxygen. Using the electron beam, Sputter, inorganic multi-layer thin-film encapsulation was deposited onto the Ethylene Terephthalate(PET) and their interface properties between inorganic and organic layer were investigated. In this investigation, the SiON SiO2 and parylene layer showed the most suitable properties. Under these conditions, the WVTR for PET can be reduced from a level of $0.57\;g/m^2/day$ (bare subtrate) to 1*10-5 g/$m^2$/day after application of a SiON and SiO2 layer. These results indicates that the PET/SiO2/SiON/Parylene barrier coatings have high potential for flexible organic light-emitting diode(OLED) applications.

• 대한전자공학회논문지SD
• /
• 제40권2호
• /
• pp.81-86
• /
• 2003

반도체형 압력센서를 이용하여 물이나 화학약품 매질의 압력을 측정하기 위해서는 센서를 보호하기 위한 패키징이 필요하다. 스테인레스 봉입형 압력센서는 SUS316으로 패키지 되어있으며 SUS316은 표면이 다량의 크롬과 니켈을 함유하고 있어 내부식성이 강하고 또한 인성 및 응접성이 양호하여 센서를 분리하는 박막으로 널리 사용된다. 그렇지만 SUS316은 강산과 강알칼리 용매에서는 급격히 부식된다. 따라서 내부식성이 우수한 파리렌 막을 SUS316의 표면에 2000A의 Cu막을 증착한 다음에 5㎛ 두께로 처리함으로써 내화학성이 우수한 압력센서를 제작할 수 있었다, 파리렌 막을 코팅하기 전에 봉입형 압력센서의 정확도는 ±0.5%FSO이었고, 코팅 후의 센서도 동일한 특성을 보여주었다.

• 접착 및 계면
• /
• 제22권3호
• /
• pp.91-97
• /
• 2021

본 연구는 Parylene C 유전체 표면에 유기 자기조립단분자막(self-assembled monolayer, SAM) 중간층을 도입함으로써 표면특성을 제어하고 최종적으로 유기전계효과 트랜지스터(organic field-effect transistors, OFETs)의 전기적 안정성을 향상시킨 결과를 제시하였다. 유기 중간층을 적용함으로써, Parylene C 게이트 유전체의 표면 에너지를 제어하였으며, OFET의 가장 중요한 성능변수인 전계효과 이동도(field-effect transistor, μ_FET)와 문턱 전압 (threshold voltage, V_th)의 성능향상과 구동 안정성을 증대시켰다. 단순히 Parylene C 유전체를 적용한 Bare OFET에서 μ_FET 값은 0.12 cm²V^-1s^-1가 측정되었으나, hexamethyldisilazane (HMDS)과 octadecyltrichlorosilane (ODTS)를 중간층으로 적용된 소자에서는 각각 0.32과 0.34 cm²V^-1s^-1로 μ_FET가 증가하였다. 또한 1000번의 transfer 특성의 반복측정을 통해 ODTS 처리한 OFET의 μ_FET와 V_th의 변화가 가장 작게 나타남을 확인하였다. 이 연구를 통해 유기 SAM 중간층, 특히 ODTS는 효과적으로 Parylene C 표면을 알킬 사슬로 덮어 극성도를 낮춤과 함께 전하 트래핑을 감소시켜 소자의 전기적 구동 안정성을 증가시킬 수 있음을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1170-1173
• /
• 2006

Active layer patterned OTFT was obtained on a plastic substrate using the optimal growth condition of pentancene thin films as active layer and parylene thin films as passivation layer. Tranditional photolithography was performed to use a dry etch to pattern the material stack. The pentacene thin film and parylene thin film were deposited onto a plastic substrate using PC-OVD and CVD, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.897-900
• /
• 2003

Chemical vapor condensation (CVC) reactor was investigated for the deposition of Parylene-N thin films as the passivation layer for organic light emitting diodes (OLEDs). Several gas inlet manifold designs were tested to improve the deposition rate and its uniformity, and it was found that proper inlet design is crucial to get the desired film properties. Process characterization was also performed with the modified inlets to optimize the process variables.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.973-976
• /
• 2006

In this paper, the inorganic multi-layer encapsulation of thin film was newly adopted to protect the organic layer from moisture and oxygen. Using the electron beam, Sputter, inorganic multi-layer thin-film encapsulation was deposited onto the Ethylene Terephthalate(PET) and their interface properties between inorganic and organic layer were investigated. In this investigation, the SiON $SiO_2$ and parylene layer showed the most suitable properties. Under these conditions, the water vapor transmission rate (WVTR) for PET can be reduced from level of $0.57g/m^2/day$ (bare substrate) to $1^{\ast}10^{-5}g/m^2/day$ after application of a SiON and $SiO_2$ layer. These results indicate that the $PET/SiO_2/SiON/Parylene$ barrier coatings have high potential for flexible organic light-emitting diode(OLED) applications.

• 마이크로전자및패키징학회지
• /
• 제24권3호
• /
• pp.19-26
• /
• 2017

Polydimethylsiloxane (PDMS) 기판과 금속박막 사이의 중간층으로 parylene F를 사용한 신축패키지 구조에서 Au, Pt, Cu 박막의 신축변형에 따른 저항변화를 분석하였다. Parylene F 중간층을 코팅한 PDMS 기판에 스퍼터링한 150 nm 두께의 Au 박막과 Pt 박막은 각기 $1.56{\Omega}$ 및 $5.53{\Omega}$의 초기저항을 나타내었으며, 30% 인장변형률에서 각 박막의 저항증가비 ${\Delta}R/R_o$은 각기 7 및 18로 측정되었다. Cu 박막은 $18.71{\Omega}$의 높은 초기저항을 나타내었으며 인장변형에 따라 저항이 급격히 증가하다 5% 인장변형률에서 open 되어, Au 박막과 Pt 박막에 비해 매우 열등한 신축 특성을 나타내었다.

• 전기학회논문지
• /
• 제66권4호
• /
• pp.721-726
• /
• 2017

We fabricated stretchable thin-film transistors(TFTs) on a polydimethylsiloxane substrate with patterned polyimide island structures by using an amorphous InGaZnO semiconductor and parylene gate insulator. The TFTs exhibited a field- effect mobility of $5cm^2V^{-1}s^{-1}$ and a current on/off ratio of $10^5$ at a relatively low operating voltage. Furthermore, the fabricated transistors showed no noticeable changes in their electrical performance for large strains of up to 50 %.