• 박물관보존과학
• /
• 제14권
• /
• pp.91-113
• /
• 2013

국립춘천박물관 소장 중요민속문화재 제 120호 청풍부원군 김우명 상여는 상여와 요여, 명정대, 만장대 등 1습으로 구성되었다. 2002년 기증되었으며(고(故) 김성구) 현존하는 최고(最古)의 왕실 제작 상여로 가치가 높게 평가되고 있다. 2012년 9월 '강원의 위대한 문화유산' 특별전시를 위하여 수장고에서 휴식기를 갖고 있던 상여를 점검한 결과 목재 부분의 채색 안료층이 박락될 우려가 있고, 직물류의 표면 손상이 심각하다고 판단하여 보존처리를 실시하였다. 이 중 매듭과 수식(垂飾)은 손상이 더 심해 전시가 불가능하므로 정밀조사에 따라 복제품을 제작하였다. 상여는 기본가구를 제외한 모든 부위가 분리된 상태였으며, 요여는 부재를 해체하여 보강한 후 재조립하였다. 상여의 목재 부분은 채색 안료층을 강화하기 위하여 Acryl 계열 수지인 Paraloid B-72 2 wt%(in ethyl acetate)를 도포한 후, 알긴산나트륨(Sodium alginate) 2 wt%(in 증류수)와 아교 4 wt%(in 증류수)를 혼합하여 사용하였다. 직물류는 표면 오염물을 제거한(Vacuuming) 후 구김을 폈다(Steaming). 지용성 오염의 경우 비이온 계면활성제(Saponin, 0.25 ~ 0.5 g/l, in 증류수)를 사용하여 제거하였다. 요여는 해체 후 부러졌던 부재를 아교 3 wt%(in 증류수, 초벌용)와 35 wt%(in 증류수, 접착용)로 접착하고 결실부 복원을 위해 건조한 소나무를 사용하였다. 운각의 연결은 본래의 금속제 경첩과 장석못을 재사용하여 조립을 완료하였다.

• 복식
• /
• 제30권
• /
• pp.69-84
• /
• 1996

The main current of ancient Korean thought is based on Yuk(易) : which solves the principle of creation of universe letter(文字) which is the principle of geometry and three elements thought of circle square . It's related to the creation principle of the universe and regarded as a sign that demons-trates shows the way to read the mathematical principle. The original form of Korean clothes(Han-Bock, 韓服) is represents the structure of hu-man body which reflects a small universe. So a good structure and meaning of the human body is well read in the formation of Korean clothes(Han-Bock, 韓服) and that is a good symbolization of the clothes(Han-Bock, 韓服) as the space of small universe. The good formation of Korean clothes(Han-Bock, 韓服) could be shown by cutting out straight bending twisting and turning each straitly cutting piece is applied to its trans-tormation. Geametical formation with obvious sym-metric dividing of front-back left-right and top-bottom is well shown in Korean clothes by twisting Yuk(易) or m bius strips. So we can find out whole formation by representing only either 'front and back' or 'left and right' and also sa-pok(사폭) of man's trousers seop(섶) of jeo-go-ri(short jacket 저고리) kyut-ma-gi(곁마기) of Sam-hwai-jang jeo-go-ri (삼회장 저고리), mu(무) of jig-ryung(straight collar and long and wide sleeved robe, 直領) trouser wide and ga-rae-ba-dae(가래바대) of dan-cok-kok(woman's under trousers). The formation line of Korean clothes(Han-Bock, 韓服) is based on theprinciple of unlimited m bius strips by twisting of turning direction from universal principle and original basic form is not changd even by turning in-side out. Unity of the whole and part in Korean clothes(Han-Bock, 韓服) could be found in nonorientable thought(非始原思想) which represents the unity and dependence kil(길) of jeo-go-ri(short jacket, 저고리) and po(long and wide sleeved robe, 袍). Selva-gewise(식서방향) of sleeves and seam of out-side of kil(길) and outside of seop(섶) are directed to outside of seop(섶) inside of seop(섶) is to kil and direction of inseam of kheut-dong(끝동) and kyut-ma-gi(곁마기) is directed to sleeves. Korean clothes(Han-Bock, 韓服) is usually made by cutting fabric for several parts and sewing them and the way to make Korean clothes is deeply related to the theory of chon-pu-kyung jong-il and il-seok -sam-geuk. As the development of men's consciousness is pro-gressed from total separation to separation and superseparation. Sewing process of korean clothes(Han-Bock, 韓服) can be make single dimension to double or triple dimension of korean clothes(Han-Bock, 韓服) silhoutte bacause it can be include principle of topology as noneuclity.

• 자원리싸이클링
• /
• 제20권3호
• /
• pp.12-27
• /
• 2011

일본의 주요 비철제련소는 100년 이상의 오랜 역사를 가지고 있으며 환경 리싸이클링산업을 주도하고 있다. 이러한 배경에는 오랫동안 배양된 비철제련 프로세스와 환경오염 방지의 고도화된 전문기술과 기술개발력이 기초가 되고 있다. 일본의 도시광산 재자원화산업은 고부가가치 자원의 회수와 유해폐기물 처리의 통합된 비즈니스로 전개되고 있다. 최근 도시광산으로서 E-waste(폐휴대전화, PC 등)의 비중이 높아지고 있다. 레어메탈 등의 유가금속과 유해물질을 함께 함유하고 있는 E-waste의 처리에는 비철제련(특히 복잡황화광)의 고도 분리 정제기술의 이용이 절대적이다. 이러한 관점에서 동화(同和)그룹의 리싸이클 콤비나트, JX일광(日鑛)그룹의 일광환경(日鑛環境) + HMC의 리싸이클시스템과 리싸이클기술은 무한 경쟁력을 가지고 있으며, E-waste의 회수시스템 구축이 중요과제로 대두되고 있다.

• 보존과학회지
• /
• 제35권5호
• /
• pp.453-469
• /
• 2019

청자 '순화4년'명 항아리는 굽바닥에 명문이 새겨져 용도와 사용처, 제작자를 알 수 있는 등 초기 청자의 제작 정황을 보여주는 중요한 편년자료이다. 청자 항아리는 과거에 여러 번 수리복원 되었으나 시간이 지나면서 다양한 환경변화로 인해 처리 재료가 노화되어 균열부의 이격 및 단차가 발생하는 등 구조적 안정성이 우려되었다. 보존상태를 정밀 진단한 결과, 청자 항아리는 정면의 '입(入)'자형 균열, 좌면의 'V'자형 결실부를 포함한 균열, 후면의 'J'자형 균열이 주요 손상부위로 확인되었다. 균열부는 장뇌, 건성유, 송진 등이 포함된 정제 옻을 접착제로 토분을 첨가하여 접합하고 접합선은 다시 정제 옻을 칠한 후 금분으로 표면 처리한 것을 알 수 있었다. 결실부는 석고로 복원 후 아크릴 물감으로 색맞춤하였다. 이후 수리복원 재료가 노화되어 1981년에 국립중앙박물관에서 응급처리를 실시하였는데, 균열부 보강을 위해 Cemedine C를 쓰거나 Cemedine C에 Microballoon을 첨가하여 사용하였다. 보존처리는 유물의 보존상태 진단 결과를 근거로, 과거 수리복원 재료를 제거하고 물리적으로 취약한 부분을 다시 접합복원을 통해 보강하는데 중점을 두었다. 또한 추후 전시하는데 활용될 수 있도록 복원부를 중심으로 색맞춤을 실시하였다.

• Earthquakes and Structures
• /
• 제12권3호
• /
• pp.333-347
• /
• 2017

Masonry infill walls are unavoidable parts of any building to create a separation between internal space and external environment. In general, there are some prevalent openings in the infill wall due to functional needs, architectural considerations or aesthetic concerns. In current design practice, the strength and stiffness contribution of infill walls is not considered. However, the presence of infill walls may decisively influence the seismic response of structures subjected to earthquake loads and cause a different behavior from that predicted for a bare frame. Furthermore, partial openings in the masonry infill wall are significant parameter affecting the seismic behavior of infilled frames thereby decreasing the lateral stiffness and strength. The possible effects of openings in the infill wall on seismic behavior of RC frames is analytically studied by means of pushover analysis of several bare, partially and fully infilled frames having different bay and story numbers. The stiffness loss due to partial opening is introduced by the stiffness reduction factors which are developed from finite element analysis of frames considering frame-infill interaction. Pushover curves of frames are plotted and the maximum base shear forces, the yield displacement, the yield base shear force coefficient, the displacement demand, interstory drift ratios and the distribution of story shear forces are determined. The comparison of parameters both in terms of seismic demand and capacity indicates that partial openings decisively influences the nonlinear behavior of RC frames and cause a different behavior from that predicted for a bare frame or fully infilled frame.

• 공업화학
• /
• 제10권7호
• /
• pp.1092-1095
• /
• 1999

기존의 혼산 공정으로 방향족 니트로 화합물을 얻는 방법은 묽은 황산이 주성분인 폐산을 처리해야 한다. 폐황산이 발생하지 않는 질산, 이산화질소와 오존을 사용하는 새로운 니트로화 공정을 3 mol 규모로 시험하였다. 디클로로에탄, p-니트로톨루엔 3 mol과 질산 6 mol의 혼합용액에 이산화질소 14.3 mol을 3번에 나누어 투입하고 오존을 0.871 mol/h의 유속으로 주입시키면 5.5시간만에 97% 이상의 전환율을 보였다. 이 방법은 일부 방향족 화합물의 니트로화 반응에서 기존의 혼산 공정을 대체할 수 있을 것이다.

• Korea-Australia Rheology Journal
• /
• 제20권2호
• /
• pp.59-63
• /
• 2008

A theoretical model was developed to describe the flow behavior of a filled polymer in the packing stage of reaction injection molding and predict the residual stress distribution of thin injection-molded parts. The model predictions were compared with experiments performed for phenol-formaldehyde resin filled with wood dust and cured by urotropine. The packing stage of reaction injection molding process presents a typical example of complex non-isothermal flow combined with chemical reaction. It is shown that the time evolution of pressure distribution along the mold cavity that determines the residual stress in the final product can be described by a single 1D partial differential equation (PDE) if the rheological behavior of reacting liquid is simplistically described by the power-law approach with some approximations made for describing cure reaction and non-isothermality. In the formulation, the dimensionless time variable is defined in such a way that it includes all necessary information on the cure reaction history. Employing the routine separation of variables made possible to obtain the analytical solution for the nonlinear PDE under specific initial condition. It is shown that direct numerical solution of the PDE exactly coincides with the analytical solution. With the use of the power-law approximation that describes highly shear thinning behavior, the theoretical calculations significantly deviate from the experimental data. Bearing in mind that in the packing stage the flow is extremely slow, we employed in our theory the Newtonian law for flow of reacting liquid and described well enough the experimental data on evolution of pressure.

• 한국생산제조학회지
• /
• 제23권3호
• /
• pp.250-258
• /
• 2014

Due to recent industrial growth and development, there has been a high demand for light and highly durable materials. Therefore, a variety of new materials has been developed. These new materials include carbon fiber reinforced plastic (CFRP or CRP), which is a wear-, fatigue-, heat-, and corrosion-resistant material. Because of its advantageous properties, CFRP is widely used in diverse fields including sporting goods, electronic parts, and medical supplies, as well as aerospace, automobile, and ship materials. However, this new material has several problems, such as delamination around the inlet and outlet holes at drilling, fiber separation, and tearing on the drilled surface. Moreover, drill chips having a fine particulate shape are harmful to the work environment and engineers' health. In fact, they deeply penetrate into machine tools, causing the reduction of lifespan and performance degradation. In this study, CFRP woven and unidirectional prepregs were formed at $45^{\circ}$ and $90^{\circ}$, respectively, in terms of orientation angle. Using a high-speed steel drill and a TiAIN-coated drill, the two materials were tested in three categories: cutting force with respect to RPM and feed speed; shape changes around the input and outlet holes; and the shape of drill chips.

• 한국실내디자인학회논문집
• /
• 제17호
• /
• pp.22-29
• /
• 1998

As the trend shows that corporate investment for staff's welfare facilities has increased alongside employee's enhanced economic and conscious level which has resulted from economic growth and industrialization this study aims at analyzing interior design elements in staff's welfare facilites especially in cafeteria and suggesting new directions for designing those spaces. The method and scope of this study in firstly to described general points such as function and role of public food service and interior design elements in staff's cafeteria and then to grasp and analyze the present conditions of the staff's cafeteria for enterprises and financial organizations which has been built after 1990. The conclusion of his study can be summarized as follows : First it is desirable to locate employee's cafeteria on upper or top floor which has relatively good atmosphere. Second it is recommended to make overall atmosphere of employee's cafeteria impressive and in commercial restaurant. Third the separation of service circulation serveries and eating area is necessary. Fourth material for each parts should be easy to maintain and durable. Fifth more illuminance that the regulation is recommended and lighting fixture should be selected in terms of economics and maintenance. Sixth selecting bright and warm colors with partial application of accent colors is effective. Seventh furniture should be harmonized with the ambience of the space and required to be convenient and durable. Eighth to provide visual and auditory pleasure during eating it is desirable to equip the minimal A/V system. In addition diverse aspects such as improving employee's welfare caring for company the way of treating employee an boosting corporate images should be considered when designing staff's cafeteria and interior designer should be able to satis managerial aspects productivity and effectiveness as well as pursuing functional aesthetic facts.

• 한국전산유체공학회지
• /
• 제21권4호
• /
• pp.11-18
• /
• 2016

A numerical study is conducted on the optical fiber coating flow in a primary coating nozzle consisting of three major parts: a resin chamber, a contraction and a coating die of small diameter. The flow is driven by the optical fiber penetrating the center of the nozzle at a high speed. The axisymmetric two-dimensional flow and heat transfer induced by viscous heating are examined based on the laminar flow assumption. Numerical experiments are performed with varying the convergent angle of nozzle contraction and the optical fiber drawing speed. The numerical results show that for high drawing speed greater than 30 m/s, there is a transition in the essential flow features depending on the convergent angle. For a large convergent angle greater than $30^{\circ}$, unfavorable multicellular flow structures are monitored, which could be associated with wall boundary-layer separation. In the regime of small convergent angle, as the angle increases, the highest resin temperature at the exit of die and the coating thickness decrease but the sensitivity of coating thickness on drawing speed and the maximum shear strain of resin on the optical fiber increase. The effects of the convergent angle are discussed in view of compromise searching for an appropriate angle for high-speed optical fiber coating.