• 소성∙가공
• /
• 제19권3호
• /
• pp.185-190
• /
• 2010

Application of CAE analyses are wide spread in shaping processes and structural safety verification of plastic products. The importance of CAE analysis and its contributions are getting increase since the processibility and structural safety of product can be predicted. CAE analysis for complex shaped product need a lot of time for modeling and computation compare with simpler one. Therefore careful simulation modeling is required for complex shaped product. Structural analysis for plastic door handle of automobile has been performed and structural safety has been investigated for various load directions and modeling cases. Large stress occurred at the hinge in handle regardless of load direction and modeling case. Consequently hinge is considered structurally very weak among the parts in plastic door handle. It is concluded that simple modeling rather than total modeling with adequate boundary condition equivalent to real situation gives reasonable computational results with saving modeling effort and computation time.

• 한국시스템다이내믹스연구
• /
• 제7권1호
• /
• pp.27-49
• /
• 2006

A system dynamics model is developed to investigate the applicability of the agent based modeling concept in the system dynamics model. The assumed problem is to forecast the size and structure of the organization with the developing market environment. The agent based modeling concept is applied to the organization part, and the other parts of the model such as market, facilities, etc. are developed with the traditional system dynamics technique. The simulation results show the agent based modeling part can be combined with the traditional system dynamics modeling with more precisions. However, the complexity increases and the simulation times are longer than those of the traditional method.

• 한국산업정보학회논문지
• /
• 제26권4호
• /
• pp.19-32
• /
• 2021

군용 항공기에 대한 모든 정비작업은 항공기 정비매뉴얼의 내용을 기반으로 수행되고 있다. 많은 정비 작업 가운데 특히 부품의 교환작업은 정비작업 가운데에서도 그 비중이 가장 높다. 부품의 교환작업에서는 부품의 형상 파악과 부품간의 체결관계 및 작업절차에 대한 정확한 이해가 대단히 중요하다. 그러나 군은 물론 민간에서 사용되는 정비매뉴얼은 모두 정비작업절차를 간단한 설명과 개략적인 그림으로 표현하고 있어 정확한 작업절차는 물론 부품의 형상을 이해하는데도 어려움이 있다. 반면에 항공기 부품을 3D 모델로 제작한다면 부품을 자유로운 방향에서 관찰할 수 있을 뿐만 아니라 3D 모델링 SW에서만 가능한 강력한 가시화(visualization) 기능을 통해 내부형상이나 체결관계도 쉽게 확인이 가능하다. 특히 정비작업을 3D 애니메이션으로 제작하면 실제와 동일한 순서로 정비작업을 3D 영상으로 관찰할 수 있어 작업절차를 직관적으로 파악하는데 도움이 될 것이다. 이에 본 연구에서는 3D 모델링 SW인 Solidworks를 활용한 3D 정비매뉴얼 개발방법을 제안하고 이에 따라 B747 항공기의 통합구동발전기 교환작업에 대한 3D 정비매뉴얼을 개발하였다. 또 개발된 3D 정비매뉴얼을 기존매뉴얼과 비교하여 그 장단점을 파악하였다. 정비매뉴얼에서 부품 교환에 대한 내용은 기종에 관계없이 비슷하므로 본 연구에서 제안된 방법은 군용항공기용 정비매뉴얼 개발에도 충분히 적용이 가능할 것으로 기대된다.

• 산업공학
• /
• 제15권1호
• /
• pp.55-63
• /
• 2002

This paper utilizes the FIDO methodology (Function, Information, Dynamic, Organization modeling) which is an enterprise modeling tool that can describe inter-organizational interaction (specifically between prime and sub contractors in this experiment). FIDO follows the standard IDEFO rules in order to demonstrate how a cascading information flow can evolve from a customer to a prime to a subcontractor in a concurrent manner, in a supply chain environment. Background on these processes is presented, followed with the newly derived process and methodology. This is presented in a supply chain management context, and results from an actual experiment at Motorola utilizing subcontractors that supply custom machine parts is presented and reviewed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1057-1062
• /
• 2008

Representing a complex, three-dimensional shape, such as an automobile, requires a large amount of CAD data consisting of millions of approximated discontinuous points, which makes it difficult or even impossible to efficiently optimize the entire shape. For this reason, in this paper, function based design method is proposed to optimize the external shape of an automobile. A vehicle modeling function was defined in the form of a Bernstein polynomial to smoothly express the complex 2D and 3D automobile configurations. The sub-sectional parts of the vehicle modeling function are defined as section functions through classifying each subsection of a box model. It is shown that the use of the vehicle modeling functions has the useful advantages in an aerodynamic shape optimization.

• International Journal of CAD/CAM
• /
• 제2권1호
• /
• pp.13-21
• /
• 2002

It is not possible to exchange parametric information of CAD models based on the current version of STEP. The design intent can be lost during the STEP transfer of CAD models. The Parametrics Group of ISO/TC184/SC4 has proposed the SMCH schema, which includes constructs for exchange of parametric information. This paper proposes a macro-parametric approach that is intended to provide capabilities to transfer parametric information including design intents. In this approach, CAD models are exchanged in the form of macro files. The macro file contains the history of user commands, which are used in the modeling phase. To exchange CAD models using the macro-parametric approach, the modeling commands of several commercial CAD systems are analyzed. Those commands are classified and a set of standard modeling commands has been defined. Mapping relations between the standard modeling commands and the native modeling commands of commercial CAD systems are defined. The scope of the current version is limited to parts modeling, not assemblies.

• 한국CDE학회논문집
• /
• 제10권4호
• /
• pp.244-253
• /
• 2005

In the initial ship design stage of shipyards, the hull form design, the basic design (compartment modeling and ship calculation), and the hull structural design are being performed by different systems. Thus, the problem on interfaces between these systems occurs. To solve this, we developed the hull form design system 'EzHULL' and the compartment modeling and ship calculation system 'EzCOM-PART' for developing finally an integrated ship design system. And, in this study, we present an object-oriented hull structural design .system 'EzSTRUCT', which is developed recently. A structural design in an initial design stage can be frequently changed, because the design is not firmly determined yet. Therefore, designers perform the simplified structural modeling with bigger structural parts (or objects) such as deck, longitudinal bulkhead, etc. in the initial design stage, and the detailed structural modeling with smaller structural parts such as plate, seam, slot, etc. in the detailed design stage. However, the existing hull structural CAD system used in a shipyard is not efficient in generating a 3D CAD model in the initial design stage, because it has difficulty in handling frequent changes in design. Therefore, designers initially draw 2D drawings in the initial design stage, and generate the 3D CAD model from these 2D drawings in the detailed design and production design stages. In this study, the hull structural design system, which can efficiently generate a 3D CAD model through rapid modeling at an initial design stage, was developed in this study To evaluate the applicability of the developed system, we applied it to hull structural modeling of various ships such as a VLCC, a bulk carrier, etc. As a result, it could efficiently generate a 3D CAD model of a hull structure.

• 한국자기학회지
• /
• 제14권3호
• /
• pp.109-113
• /
• 2004

구형파의 디지털 자료를 전송하기에 적합한 구조의 휘트스톤 브리지 형태로 GMR 아이솔레이터를 모델링하고, 여기에서 입력전류에 대한 출력전압특성을 시간영역에서 조사하였다. GMR 아이솔레이터를 자기적 부분과 전기적 부분으로 나누고 제조된 스핀벨브 소자의 측정결과를 대입하여 출력전압을 구할 수 있는 모델링 순서도를 설정하였다. 자기적 모델링으로는 평판코일의 3차핀 모델을 FEM방법으로 해석하여 입력전류에 의해 생성되는 자장의 세기를 구하였다. 전기적 모델링을 위해 평판코일의 저항과 인덕턴스 그리고 정전용량을 계산하여, 시간영역에서 입력전류파형과 이에 따른 자기장파형을 구하였다. 마지막으로 스핀밸브의 MR-H 측정곡선과 평판코일에서 발생된 자장의 세기를 조합하여 아이솔레이터의 출력전압파형을 계산하였다. 여기에서 GMR 아이솔레이터의 입력전류파형에 비해 코일전류파형의 진폭이 최고 100％ 정도 증가하거나 90 ％ 정도 감소하고, 주기의 10％ 정도에 해당하는 지연이 발생하였다. 그럼에도 출력전압 파형은 스핀밸브의 히스테리시스 특성 때문에 400 Mbit/s 이상의 전송속도에서 입력전류파형과 비슷하게 복원되어 전달될 수 있음을 예측할 수 있었다.

• 한국정밀공학회지
• /
• 제32권11호
• /
• pp.953-960
• /
• 2015

The thermoforming process has been widely used to manufacture medium- and large-sized plastic parts because of the relatively low cost and high productivity, as compared with other plastic forming processes. One of current salient issues of thermoforming industries is the reduction of trial and error during the production of the thermoformed product. Hence, there is a significant increasing interest in the thermoforming analysis by the thermoforming industries. The goal of this paper is to investigate a methodology of the three-dimensional thermoforming analysis for medium- and large-sized plastic parts. There is a discussion about methodologies of thermoforming analysis, as well as material modeling, and three-dimensional finite element analysis. Furthermore, there is an examination, through case studies, about the applicability of the proposed methodology concerning the thermoforming analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.23-27
• /
• 2007

Many trials have been used to model room impulse responses, all attempting to provide efficient representations of room acoustics. The traditional model designs for room impulse response seem to fail in accuracy, controllability, or computational efficiency. In time domain, a room impulse response is generally considered as the combination of three parts having different acoustic characteristics, initial time delay, early reflection, and late reverberation. This paper introduces new learning hybrid model for the room impulse response. In this proposed model, those three parts are modeled using different models with learning algorithms that determine the length or boundary of each model in the hybrid model. By the simulation with measured room impulse responses, it was examined that the performance of proposed model shows the best efficiency in views of both the parameter numbers and modeling error.