• 한국태양에너지학회 논문집
• /
• 제32권2호
• /
• pp.58-63
• /
• 2012

As the exterior of building has been considered one of th important parts, the use of glass that is suitable to express various appearances gets raised. However, windows have 6~7times lower insulating performance than insulated walls. Lately, highly efficient windows are required as the needs for reduction of energy consumption come to the force. Therefore, Nowadays more people use cooling systems in summer, more the use of Low-E glazing is increasing. Because it is good to block Solar Radiant Energy which can cause much of heat loss while cooling system is working. This study measures U-value of the double Low-E glazing window and commonly used single Low-E glazing window. And then the effect of each window on the efficiency rating has been analyzed applying to the certification system of the building energy efficiency rating which has implemented.

• 대한기계학회논문집A
• /
• 제30권5호
• /
• pp.560-567
• /
• 2006

The exact load measurements for the mechanical parts of a wind turbine are important step both fur the evaluation of a specific wind turbine design and for a certification process. A common method for a mechanical load measurement is using a strain gauge sensing. Two main problems ought to be answered in order for this method to be applied to the wind turbine project. These are strain gauge calibration and non-contact signal transmission from the strain gauge output to a load monitoring system. This paper suggests reliable solutions fer these two problems. A Bluetooth, a short range wireless data communication technology, is used to solve the second problem. The first one, the strain gauge calibration methodology for a load measurement in a wind turbine application, is fully explained in this paper. Various mechanical loadings for a strain gauge calibration in a wind turbine load measurement are introduced and analyzed. Initial experimental results which are obtained from a 1 kW small size wind turbine are analyzed, and the uncertainty problem in estimating mechanical loads using a calibration matrix is fully covered in this paper.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.188-193
• /
• 2017

미국과 유럽은 대형 항공기 산업을 선도하고 있으며, 아시아-태평양 지역에서는 물동량이 증가하면서 운송산업과 정비산업이 크게 발전할 것으로 전망된다. 또한, 일본과 중국은 중소형 항공기 분야에서 설계 제작국에 진입하였으며, 후발국가의 정비산업도 경쟁이 더욱 가속되고 있다. 향후 10년간 세계의 항공기 정비산업은 연평균 3.4%로 성장하고, 엔진 정비산업은 7%씩 성장할 것으로 전망된다. 본 논문을 통하여 고부가가치를 창출할 수 있는 기술집약형 항공엔진 정비산업 육성 방안을 제시하고자 한다.

• Tribology and Lubricants
• /
• 제32권6호
• /
• pp.189-194
• /
• 2016

Wear debris in lubricating oil can be indicative of potential damage to mechanical parts in rotating and reciprocating machinery. Therefore, on-line or in-line monitoring of lubricating components in machinery is of great importance. This work presents a device based on inductive measurement of lubricating oil to detect magnetic wear particles in a tested volume. The circuit in the device consists of Maxwell Bridge and LVDT to measure inductance differences between pure and contaminated oil. The device detects the passage of ferrous particles by monitoring inductance change in a coil. The sensing principle is initially demonstrated at the microscale using a solenoid. The device is then tested using iron particles ranging from $50{\mu}m$ to $100{\mu}m$, which are often found in severely worn mechanical components. The test results show that the device is capable of detecting and distinguishing ferrous particles in lubricating oil. The design concept demonstrated here can be extended to an in-line monitoring device for real-time monitoring of ferrous debris particles. A simulation using the CST code is performed to better understand the inductive response in the presence of magnetic bodies in the oil. The CST simulation further verifies the effectiveness of inductance measurement for monitoring magnetic particles within a tube.

• International Journal of Advanced Culture Technology
• /
• 제11권1호
• /
• pp.171-180
• /
• 2023

This study is to develop a performance analysis model for SMEs.Based on similar performance indicators through previous studies, performance indicators for SMEs were rewritten.Through the Korean Journal Citation Index (KCI), 75 related data were classified and a comprehensive SME performance analysis model was developed.Performance analysis was divided into two axes and classified into tables.The horizontal axis is the spatial performance range, which is divided into three areas: performance management by department/function, integrated performance management for the entire organization, and governance performance management requiring policy feedback. The vertical axis is subdivided into short-term, mid-term, and long-term by time and growth stage, and is divided into three parts: technical performance according to technological input, economic performance as organizational performance, and social performance for policy utilization. Then, performance indicators were mapped to each column. As a result of the survey, 28% of technical performance was analyzed as a result of frequency analysis, and performance indicators were organized into five categories: IT, R&D, certification, patent, and innovation. Economic performance was divided into 29%, BSC, HRD, logistics, production quality management, financial support, asset management, etc. 6 categories, social performance 43%, ESG, marketing, export, policy support, consulting, cooperation, etc. 7 categories.Limitations of the study include the narrowness of the survey that derived only performance indicators despite being a meta-analysis, and the performance model was mapped and classified according to growth stage and support period.however Insufficiency of validity due to lack of evidence, performance indicators were developed, but there were limitations in utilization for practical use.

• 지능정보연구
• /
• 제20권2호
• /
• pp.149-162
• /
• 2014

수강지도는 학생의 졸업인증이나 공학교육인증 이수를 위해 수강 신청 이전에 수행되는 과정을 지칭한다. 수강지도는 학생의 수강이력 점검과 향후 수강 과목의 안내 등을 포함하여 학생들의 졸업 및 교과과정 인증과 관련된 중요한 역할을 하고 있다. 현재 대부분 대학에서는 수강지도를 위한 전산시스템의 부재로 인해 지도교수가 직접 수동적으로 수강지도를 진행하고 있다. 하지만 이러한 수동적인 방식의 수강지도는 지도교수가 각 학생에 대한 정보를 분석해야 하고, 때때로 휴먼에러를 일으키게 된다. 수강신청이 학기 단위로 이루어지기 때문에 휴먼에러로부터 발생된 피해는 원상태로 되돌리는 것이 거의 불가능하다. 따라서 수강지도를 진행함에 있어 자동화된 시스템은 필수적인 요소로 판단된다. 관계 데이터 모델을 이용한 수강지도 시스템의 도입은 수동적인 수강지도의 문제점을 해결할 수 있게 해준다. 하지만 교육과정 및 인증제도의 변화에 따라 기존 시스템의 스키마 변경이 요구되고, 수강 과목 사이에 존재하는 관계 및 의미적인 검색을 제공하는 것이 어렵다는 한계가 존재한다. 본 논문에서는 수강지도 시스템을 위한 수강지도 온톨로지를 모델링하고, 온톨로지 기반의 수강지도 시스템을 설계한다. 온톨로지 인스턴스 생성을 위해 JENA 프레임워크를 이용하여 온톨로지 생성 모듈을 개발하였고, 실험에 참가한 학생의 수강 이력 데이터를 기반으로 온톨로지 인스턴스를 생성하고 추론과정을 통해 트리플 저장소에 저장하였다. 실험은 제안하는 시스템이 학생들이 향후 수강할 수 있는 과목을 모두 제공하는지 여부와 제공되는 과목에 대한 정보 및 학점 계산들이 정확한 지를 측정하였다. 실제 학생의 수강내역을 이용한 실험의 결과는 온톨로지 기반의 수강지도 시스템이 현 수강지도 시스템의 수동적 방법을 해결하고, 사람이 지도한 내용과 같은 내용을 도출하는 것을 확인함으로써 제안하는 시스템의 유효성을 보여준다.

• 한국건설관리학회논문집
• /
• 제1권2호
• /
• pp.81-88
• /
• 2000

건설회사 본사차원의 안전관리 활동은 회사 전체의 안전관리업무 기획 및 조정 등을 하는 업무로서 건설회사의 안전수준을 향상시키는 데 있어 매우 중요한 요소 중의 하나이다. 이에 본 연구는 건설회사의 안전수준에 따라 합리적이고 효과적인 본사 안전관리 업무가 가능한 안전전략을 제안하는 목적으로 수행되었다. 국내 대형 건설회사 본사의 안전관리업무 실태를 파악하기 위하여 초일류기 업 인증제도의 안전부문 평가항목 및 기준 중 본사 차원에 해당되는 것을 안전관련 전문가를 통해 이의 유효성을 검증하도록 하였다. 이러한 과정을 통하여 채택된 평가항목 및 기준을 조사대상인 79개 건설회사에 대하여 설문조사를 실시하였다. 수집된 51개 건설회사의 설문조사 결과를 바탕으로 현재의 건설회사 안전수준에서 안전성과를 향상시킬 수 있는 안전전략을 79개 건설회사의 3년간 평균 재해율인 1.20을 기준으로 평균 재해율 이하와 이상인 건설회사 집단으로 구분하여 제안하였다.

• 품질경영학회지
• /
• 제46권2호
• /
• pp.193-210
• /
• 2018

Purpose: The purpose of this study is to escape from the existing defense quality policy focused on government-led quality assurance for mass-produced items and to secure quality reliability of weapon systems through a defense quality policy paradigm shift based on designing a verification systems anchored on reliability through the enhancement of military supply quality control in the development stage, the enhancement of quality responsibility of the manufacturing contractor and other methods. Methods: For the shift to the quality-based defense quality policy, the status and the problems of the status quo are analyzed and the direction of future defense quality policy is suggested based on literature review of the concept of reliability and reliability in the field of defense, on case studies of global corporations and their quality policies, on the background on quality assurance in defense, and on case studies of quality policies in other government organizations, Results: Based on the case studies of quality policies in global corporations and other government agencies, the importance of preventive quality control from the early development stages, quality control based on the reliability of the materials and parts, and shift of the quality policy to a certification system to achieve these objectives were highlighted. Conclusion: To secure reliability of weapon system quality, the quality policy must be shifted to a system focused on reliability-based design and verification and there is a further need to enhance the operational efficiency and capacity of DTaQ based on studies and evaluation of weapon system reliability.

• 보건교육건강증진학회지
• /
• 제15권2호
• /
• pp.67-79
• /
• 1998

Health education is essential service of health promotion program, and health promotion is external extension of health education. However, the implementation of health education in community is not well because of lack of budget and health education specialist, deficient cognition for health promotion. Hence, introduction for the credential on health educator is to assist community and school health through the training of the specialist This study was carried out to establish the credential health educator for activation of health promotion program in Korea. In detail, this study aimed at 1) to confirm the law for health education, 2) to understand the credential on health education specialist in U. S. and the certification on other parts in Korea, 3) to establish the proper credential on health educator in Korea. Finding the results were as follows: The law on health education was Regulation on Health Promotion which has defined the health educator and responsibility of health education. In case of U. S., the credential on health education specialist has implemented since 1992, and the sort of credential on health education specialist were community health educator, public health educator, school health educator, and health promotion specialist. Therefore, major opinion to introduce the proper credential on health education in Korea were suggested: the first, establishment of educational processing on the training of specialized health educator, the second, introduction of examination on the evaluation for ability as health educator. the last. planning for application of health educator in community.

• 한국농촌건축학회논문집
• /
• 제20권1호
• /
• pp.11-18
• /
• 2018

The study aims to address the energy crisis and realize self-sufficiency of building as part of local energy independence, breaking away from a single concentrated energy supply system. It is intended to develop modules of the outside insulation composite panels that conform to passive certification criteria and for site-assembly systematization. The method of study first identifies trends and passive house in literature and advanced research. Second, the target performance for development is set, and the structural material is selected and designed to simulate performance. Third, a test specimen of the passive outside insulation curtain wall module designed is manufactured and constructed to test its heat transmission coefficient, condensation performance and airtightness. Finally, analyze performance test results, and explore and propose ways to improve the estimation and improvement of incomplete causes to achieve the goal. The final test results achieved the target performance of condensation and airtightness, and the heat transmission coefficient was $0.16W/(m^2{\cdot}K)$, which is $0.01W/(m^2{\cdot})K$ below the performance target. As for the lack of performance, we saw a need for a complementary design to account for simulation errors. It also provided an opportunity to recognize that insulated walls with performance can impact performance at small break. Thus, to be commercialized into a product with the need for improvement in the design of the joint parts, a management system is needed to increase the precision in the fabrication process.