• 한국환경독성학회:학술대회논문집
• /
• 한국환경독성학회 2002년도 추계국제학술대회
• /
• pp.155-155
• /
• 2002

Ambient urban particulate matters contain various transition metals. When the particulate matters are inhaled into the lung, not all but some part of metals from the particles might be mobilized to participate in a reaction that can damage various biomolecules, such as DNA and proteins. The dust particle size as well as organic acids may influence the metal mobilization. Thus, the mobilization of the metal from SRM1648 (NIST, USA) and urban particulate matters (PM2.5 and PM10) was measured in the presence of artificial or biological chelator with or without reductant. The degree of the mobilization was higher with the artificial or biological chelator than the control with saline. In some cases, a reductant increased the mobilization as much as about 5 times the control without the reductant. Especially, the mobilization of Fe was greatly influenced by the presence of reductants. In general, the degree of the mobilization of the transition metal was higher with PM2.5 than with PM10. Therefore, it is expected that, considering the previously known toxicities of the transition metals, the PM2.5 is more damaging to various biomolecules than PM10. The results also suggest that not the total amount but the mobilizable fraction of the metal in the dust particles should be considered with regard to the toxicity of the urban particulate matters.

• 환경영향평가
• /
• 제28권5호
• /
• pp.440-456
• /
• 2019

본 연구는 미세먼지에 대한 야외활동의 위험인식의 논란에 따른 미세먼지 우려의 본질을 파악해보고자 미세먼지의 노출로 건강에 영향을 많이 받는 자전거 커뮤니티를 대상으로 카페글과 댓글을 수집하여 분석하였다. 그 결과 첫째, 정부에서 주도한 미세먼지 정책은 매 시기별로 견고해지고, 세분화되고 있었지만 자전거 커뮤니티 내에서의 미세먼지 위험인식은 시간흐름에 따라 논의가 활성화되고, 심각해지고 있었다. 둘째, 미세먼지 우려로 인한 야외활동 인식변화를 분석한 결과 자전거 커뮤니티 회원들은 날씨 변수보다 미세먼지 등급에 따라 야외활동 여부가 달라지는 양상을 보였다. 또한 국내 미세먼지 수치나 마스크 성능에 대한 불신과 맞물리면서 일상생활과 건강에 심각한 위협을 주는 공포의 대상으로 변화되고 있었다. 궁극적으로 이러한 미세먼지 위험인식은 주로 야외에서 즐겼던 자전거활동 일부를 실내공간으로 이동하게 하였다. 하지만 경관, 사람, 날씨 등 야외에서 다양한 요소들을 누리며 즐겼던 자전거활동에 비해 단조로운 실내 자전거운동은 헬스, 요가 등의 다른 실내운동 유형으로 전환되고 있었다. 종합적으로 살펴보면 미세먼지에 대한 자전거 이용객의 위험인식이나 야외 자전거활동의 인식변화는 정부나 지자체 등에서 제공하는 미세먼지 농도수치의 정확성, 중국영향, 국내 어플리케이션 신뢰성, 마스크 성능, 미세먼지 농도 제시방법(숫자제시형, 점적 데이터 제공) 등 정책 불신과 검증되지 않는 과도한 정보 오류로 인한 논란이 가장 큰 역할을 하고 있는 것으로 도출되었다. 따라서 모든 계층을 아우르는 종합적 사회방안이나 정부주도형 미세먼지 정책을 제시하기보다 자전거 이용객들의 눈높이에서 미세먼지로 인한 건강상의 위험을 인지하는 것이 필요하다. 또한 총체적 유기적으로 미세먼지를 인식하도록 돕는 체감형 위험 커뮤니케이션이나 교육 및 홍보과정이 선행되어야 하고, 단계별 토의를 통한 사회적 합의와 함께 향후 야외활동 유형별로 세분화된 체계적 연구가 추진되어야할 것으로 판단된다. 이에 따라 본 연구는 정부와 지자체, 언론, 국민들의 효과적인 커뮤니케이션 방향 모색을 위한 학술적 근거로 제공될 수 있을 것으로 기대된다.

• 한국농공학회논문집
• /
• 제63권1호
• /
• pp.75-87
• /
• 2021

Air quality related to particulate matters and ammonia is being come to the fore as the national concern in Korea. CAPSS (Clean Air Policy Support System) provides emission coefficients of these kinds of particulate and gaseous matters in the fields of livestock; however reliability issues are consistently mentioned. Evaluation of emission rates of PM2.5 and NH3 of the country is very important, but only few studies are available as the background related to observation of the concentration of the particulate matter and ammonia, especially within livestock house in Korea. In this paper, long-term measurement of PM10, PM2.5, and ammonia within the mechanically ventilated broiler house were carried out to introduce backgrounds of generation and emission of the particulate matters and ammonia. Measurement results were analyzed according to seasonal changes, age of broilers(weeks) and measurement locations. Concentration of inhalable and respirable dust were also evaluated in terms of occupational respiratory health according to increase in broiler's activity. From the results of this study, identification of the generation mechanisms of the particulate and gaseous matters, and evaluation of the emission rate of these in the broiler house will be carried out.

• 한국독성학회:학술대회논문집
• /
• 한국독성학회 2005년도 춘계 국제심포지엄 및 학술대회
• /
• pp.122-122
• /
• 2005

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권4호
• /
• pp.484-489
• /
• 2012

본 논문은 선박의 주 추진기관으로 사용가능한 육상 운송수단에 탑재되어있는 대형 디젤엔진에서 배출되는 입자상 물질과 질소산화물의 배출특성을 ESC mode에 적용시켜 분석하는데 초점을 두었다. 입자상 물질은 엔진의 고부하 영역에서 다량으로 배출되는 특성을 확인 할 수 있었으며 질소산화물의 경우 배기가스 온도 측정형태와 동일한 경향으로 배출되었다. 매연여과장치를 부착하여 입자상 물질의 배출특성을 분석한 결과 mode별 1/100~1/1,000배까지 저감되었다. 그러나 급격한 엔진 부하 변동 시 저감효과는 떨어졌으며 고속-고부하 영역에서는 매연여과장치내부의 온도상승으로 일부 재생현상이 발생하여 입자상 물질의 배출 증가 결과를 초래하는 현상이 발생하였다. 시험엔진에서 배출되는 입자상 물질의 입경분포를 분석한 결과 대부분 100nm 이하의 크기를 가지는 나노 입자가 배출되었으며 매연여과장치를 부착 및 탈착하여 측정한 결과 배출수준에는 차이가 있지만 입자상 물질의 입경분포는 비슷한 경향으로 분석되었다.

• Elastomers and Composites
• /
• 제56권4호
• /
• pp.234-242
• /
• 2021

The demand for truck bus radial (TBR) tires with enhanced fuel efficiency and wear resistance have grown in recent years. In addition, as the issue of particulate matter and air pollution increases, efforts are being made to reduce the generation of particulate matter. In this study, the properties of epoxidized natural rubber (ENR) containing a silica-friendly functional group were evaluated by considering it as a base rubber and varying the silica ratio in this binary filler system. The results showed that the wear resistance of the NR/BR blend compound decreased as the silica ratio increased. In contrast, the ENR/BR blend compound exhibited an increase in wear resistance as the silica ratio was increased. In particular, the ENR-50/BR blend compound showed the best wear resistance due to the presence of several epoxide groups. Furthermore, we observed that for tan 𝛿 at 60℃, higher epoxide content resulted in the higher T_g of the rubber, indicating a higher tan 𝛿 at 60℃. On the other hand, it was confirmed that increasing the silica ratio decreased the value of tan 𝛿 at 60℃ in all compounds. In addition, we measured the amount of wear particulate matters generated from the compound wear. These measurements confirmed that in the binary filler system, regardless of the filler type, the quantity of the generated wear particulate matters as the filler-rubber interaction increased. In conclusion, the silica filled ENR/BR blend compound exhibited the lowest generation of wear particulate matters.

• 대한환경공학회지
• /
• 제39권4호
• /
• pp.220-228
• /
• 2017

많은 산업 및 도로이동오염원 등으로부터 발생되는 미세먼지는 인간건강과 호흡기에 큰 영향을 미치고 있으며 이에 대한 중요성이 점차 증가하고 있다. 세계보건기구(WHO)에서도 미세먼지($PM_{10}$) 및 초미세먼지$PM_{2.5}$)를 석면 및 비소 등의 물질과 같은 등급인 1급 발암물질로 지정한 이후로 우리나라에서도 지속적인 관심과 연구를 진행해오고 있다. 현재 환경부와 각 지자체별로 미세먼지 및 대기오염정보를 구축하여 제공하고 있지만, 특히 미세먼지 주의보 및 경보발령에 있어서 미세먼지 $PM_{10}$ 및 $PM_{2.5}$ 자료만을 활용하고 있고 미세먼지형성에 영향을 주는NOx, SOx, $NH_3$자료는 활용 및 고려를 하지 않고 있다. 또한 국내 산업별 및 지자체별로 세부적인 미세먼지형성 가능성(particulate matter formation potential) 및 발생되는 미세먼지로 인한 인체호흡기 영향평가(respiratory effects)와 관련된 연구는 많이 진행이 되고 있지 않다. 이에 본 연구의 목적은 국내 11개 산업별 및 시도별로 2001년과 2013년 환경부 및 국립환경과학원에서 제시하고 있는 NOx, SOx, $PM_{10}$, $NH_3$ 자료를 활용하여 미세먼지형성(particulate matter formation potential) 평가와 이로 인한 인체 호흡기 영향을 평가 및 산정하여 비교 제시하고자 하였다. 본 연구결과로는 산업별 및 시도별로 미세먼지형성과 인간건강에 영향을 제시하였으며, 향후 미세먼지 관련 연구에 중요하게 활용할 수 있을 것으로 사료된다.

• 한국대기환경학회지
• /
• 제29권6호
• /
• pp.713-721
• /
• 2013

This study is about emission characteristics of HAPs and particulate matters emitted by spray of paint and organic solvent usually used in vehicle paint facilities. To analyze emission characteristics of HAPs and particulate matters emitted from vehicle paint facilities are calculated based on the measuring emission quantity of pollutants based on the amount of paint used (kg) and unit area ($m^2$) by paint manufacturers (J company, K company, and R company). In cases of paint manufacturers (J, K, and R), average emission factors of VOCs, carbonyl compound, particulate matter, and PAHs per 1 kg of paint were 327.81 g/kg, 5.98 g/kg, 336.70 g/kg, and 0.0078 g/kg respectively. The average emission factors of VOCs, carbonyl compounds, particulate matters, and PAHs by unit area were $171.55g/m^2$, $3.10g/m^2$, $176.27g/m^2$, and $0.0036g/m^2$ respectively.

• 한국대기환경학회지
• /
• 제2권2호
• /
• pp.9-18
• /
• 1986

For identification and apportionment of sources emitting particulate matters in environment, the multi-elemental characterization of size-density fractionated particulate matters was carried out. Eight types of samples were tested; soil, flyash released from burning of bunker-Coil, diesel oil, coal, and soft coal, urban road-way dust, urban dust fall, and airborne particulate matter. The fractions of particulate matters obtained by heavy liquid separation methos with a series of dichloromethane-bromoform were then analyzed using atomic absorption spectrophotometry for Ni, Cr, Cu, An, Fe, Al, and Mg. Each sample showed a different concentration profile as a function of density, and a number of useful conclusions concerning characterization of elemental distribution were obtained. From the density distributions of elements in soil, the maximum value was found for all elements in the density range of 2.2 $\sim 2.9g.cm^{-3}$, including the density of $SiO_2$. However, the distribution of metallic compounds with the density lower than $2.2g.cm^{-3}$ was prevalent in urban roadway dust, urban dust fall, and airborne particulate matter. And the density distribution curves of these urban dusts also have the higher distribution at the density of 2.2 - 2.9g.cm^{-3}$, including the density of wind-blown silica. This tendency generally was prevalent in the natural source elements, such as Al, Fe, Mn, and Mg. The maximum values were found in the density ranges of 1.3 $\sim 2.2g.cm^{-3}$ from the density distribution of elements in oil fired flyash. These distributions of anthropogenic source elements, such as Zn, Ni, Cu, and Cr were higher predominately than those of natural source elements. And the higher distribution was found in the density range of $2.2 \sim 2.9g.cm^{-3}$ from the density distribution of elements in coal and soft-coal fired flyash. These distributions showed similar patterns to soil. But anthropogenic source elements somewhat predominated at the density ranges of $1.3 \sim 2.2g.cm{-3} and 2.9g.cm^{-3}$ to soil. Therefore the higher distribution of anthropogenic source elements in the density ranges of $1.3 \sim 2.2g.cm^{-3} and 2.9g.cm^{-3}$ was considered as anthropogenic origin.

• 대한기계학회논문집B
• /
• 제30권10호
• /
• pp.973-981
• /
• 2006

Recently there is an increasing interest in particulate matter emission because of new emission regulations, health awareness and environmental problems. It requires to improve particulate measurement techniques as well as to reduce soot emissions from combustion systems. As mentioned above, it is demanded that reduction techniques together with measurement techniques of exhausted particulate matters in combustion systems such as vehicles. However, measurement techniques of particulate matters should be prior to reduction techniques of that because it is able to know an increase and a decrease of exhausted particulate matters when measured particulate matters. Therefore, in this study, we report the measurement of soot primary-particle size using time-resolved laser induced incandescence (TIRE-LII) technique in laminar ethylene diffusion flame. As an optical method, laser induced incandescence is one of well known methods to get information for spatial and temporal soot volume fraction and soot primary particle size. Furthermore, TIRE-LII is able to measure soot primary particle size that is decided to solve the decay ate of signal S $(t_1)$ and S $(t_2)$ at two detection time. In laminar ethylene diffusion flame, visual flame height is 40 mm from burner tip and measurement points are height of 15, 20, 27.5, 30 mm above burner tip along radial direction. As increasing the height of the flame from burne. tip, primary particle size was increased to HAB(Height Above Burner tip)=20mm, and then decreased from HAB=27.5 mm to 30 mm. This results show the growth and oxidation processes for soot particles formed by combustion.