• 대한화학회지
• /
• 제4권1호
• /
• pp.7-9
• /
• 1957

On sparking carbon-arc in water we found that a inflammable gas was generated. The object of this experiment is to prepare sols of metals by applying the gas mentioned to a solution of metallic salts. As the result of this experiment we found that : 1) By this method we can prepare easily some kinds of Ag-sol from $AgNO_3$ solution in about 30 sec. by adjusting the temperature, the quantity of stabilizer and the concentration of metallic salt. 2) The appropriate concentration of $AgNO_3$ is about 0.01% by volume, that of the stabilizer, 0.9104 N-NaOH is 0.03-2 cc/100 cc of 0.01% $AgNO_3$ solution. And the lower the temperature, the more concentrated the Ag-sol. But to check the possibility of applying this method to metals other than Au and Ag, measurement of the particle size and properties of a sol prepared by this method, should be studied. Especially, we must study what kinds of gases are generated by sparking the carbon-arc in water.

• 한국환경과학회지
• /
• 제21권6호
• /
• pp.687-694
• /
• 2012

Zeolite 4A was synthesized by fusion method from coal fly ash discharged at the thermal power plants. The synthesized zeolite(FAZ) was characterized through particle size analyzer, XRD, XRF and SEM. $N_2$ adsorption-desorption measurement was used to examine surface and pore structures. The adsorption experiments were carried out under dynamic conditions of trace $SO_2$ in $N_2$ to investigate $SO_2$ adsorption capacity of FAZ. The experiments were conducted to characterize the breakthrough characteristics of $SO_2$ in a fixed bed under different operating conditions including temperature(50-$125^{\circ}C$), concentration of $SO_2$(3000-10000 ppm) and FAZ with 4 kinds of commercial zeolite. The adsorption capacity of FAZ was 53.84 $mgSO_2/g$ adsorbent, larger than that of the same type commercial zeolite(WK4A).

• Wind and Structures
• /
• 제31권4호
• /
• pp.351-362
• /
• 2020

In this study, the impact of roof slope on the flow characteristics over low-sloped gable roofs was investigated using steady computational fluid dynamics (CFD) simulations based on a k-ω SST turbulence model. A measurement database of the flow field over a scaled model of 15° was created using particle image velocimetry (PIV). Sensitivity analyses for the grid resolutions and turbulence models were performed. Among the three common Reynolds-averaged Navier-Stokes equations (RANS) models, the k-ω SST model exhibited a better performance, followed by the RNG model and then the realizable k-ε model. Next, the flow properties over the differently sloped (0° to 25°) building models were determined. It was found that the effect of roof slope on the flow characteristics was identified by changing the position and size of the separation bubbles, 15° was found to be approximately the sensitive slope at which the distribution of the separation bubbles changed significantly. Additionally, it is suggested additional attention focused on the distributions of the negative pressure on the windward surfaces (especially 5° and 10° roofs) and the possible snow redistribution on the leeward surfaces.

• Near Infrared Analysis
• /
• 제1권2호
• /
• pp.35-39
• /
• 2000

The purpose of this research was to find out suitable soil sample preparation and sample holding tools for NIR reflection radiation for estimating soil components. NIR reflectance was scanned at 2nm intervals from 1,100 to 2,500nm with an InfraAlyzer 500(Bran+Luebbe Co.). Coarse(2.0mm) and fine(0.5mm) soil sample and various sample holding tools were used to obtain mean diffuse reflection of the soil for the calibration and validation of the calibration set in estimating moisture, organic matter and total nitrogen of the soils. Multiple linear regression was used to obtain the best correlation of NIR spectroscopy method. Correlation of NIR spectroscopy method. Correlation of NIR spectra for finely and coarsely sized soil did not show much difference. The standard errors of prediction(SE) using different types of sample holding tools for organic matter, total nitrogen and soil moisture were better than 0.765, 0.041 and 0.63% respectively. From the results it can be concluded that NIR spectroscopy with flow type cell could be used as a fast routine testing method in quantitative determination of organic matter, total nitrogen and soil moisture.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.417-421
• /
• 2006

In this study, colloidal Ag solution was spouted on the surface of the inorganic pigment using the hybridizer system and the spray nozzle. Then, the surface of the inorganic pigment was modified by titanium dioxide in order to possess antibacterial ability. Nano-sized colloidal Ag was made by using a seed sol method in this study. It was confirmed that the size of particle per unit weight becomes enlarged, as the addition of $AgNO_{3}$ increased, and as the time of reaction increased, in the manufacturing process of nano-sized colloidal Ag. The antibacterial measurement of the inorganic pigment showed that the growth of fungus was reduced as the reaction time increased. It was measured that the antibacterial activity was excellent at fixed time frame, after the antibacterial ability appeared in $5{\sim}7$ hours of the antibacterial inoculation experiment. The experiment of titanium dioxide's Photocatalyst effect showed $60{\sim}70%$ efficiency in about 80 minute reaction time of the dissolution results regarding measurements of benzene. It was shown that more than 90% of the dissolution efficiency was achieved in the reaction time of about 30 minute.

• 한국정밀공학회지
• /
• 제22권10호
• /
• pp.121-128
• /
• 2005

The research on electromagnetic shielding has been advanced for military applications as well as for commercial products. Utilizing the reflective properties and absorptive properties of shielding material, the replied signal measured at the rear surface or at the signal source can be minimized. The shielding effect was obtained from materials having special absorptive properties and structural characteristics such as stacking sequence. Recently researchers studied the electromagnetic properties of nano size particles. In this research {glass fiber}/{epoxy}/{nano particle} composites(GFR-Nano composites) was fabricated using various nano particles, and their properties in electromagnetic shielding were compared. For the visual observation of the nano composite materials, SEM(Scanning Electron Microscope) and TEM(Transmission Electron Microscope) were used. For the measurement of electromagnetic shielding, HP8719ES S-parameter Vector Network Analyser System was used on the frequency range of 8 GHz${\~}$12GHz. Among the nano particles, carbon black and Multi-Walled Carbon Nano-Tube (MWCNT) revealed outstanding electromagnetic shielding. Although silver nano particles (flake and powder) were expected to have effective electromagnetic shielding due to their excellent electric conductivities, test results showed little shielding characteristics.

• 접착 및 계면
• /
• 제10권4호
• /
• pp.174-181
• /
• 2009

고 고형분 점착제의 점도 개선을 위해 seed 중합을 이용하여 수용성 저점도 점착제를 중합하였다. Seed 바인더 중합 중 최적 중합 조건을 산출하고, 점착제 중합 시 seed 바인더와 acrylic acid의 함량을 변화시켜 점도변화와 피착면에 대한 점착박리강도를 측정하여 다음과 같은 결과를 얻었다. 점착제 중합에서 seed 바인더의 함량이 7 wt%/monomer일 때 60%의 고형분에서 2,100 cps의 낮은 점도를 나타내고 평활한 점착제 필름을 제조할 수 있었다. Acrylic acid함량 변화에 따른 기계적 물성 측정에서는 4 wt%/monomer의 acrylic acid를 사용 했을 때 우수한 점착박리강도와 유지력을 나타내었다.

• 한국분말재료학회지
• /
• 제12권1호
• /
• pp.70-78
• /
• 2005

Mechanical alloying using high-energy ball mill and subsequent spark plasma sintering (SPS) process was applied to understand mechanical alloying processing of Al-Fe alloy system. The thermal stability of mechanically alloyed Al-Fe alloy was intended to be enhanced by SPS process. Various analytical techniques including particle size analysis, density measurement, micro-Vickers hardness test, SEM, TEM, and X-ray diffractometry were adopted to find optimum processing conditions for mechanical alloying and subsequent SPS and to estimate thermal stability of the prepared alloy. It was found from the treatment of mechanically alloyed Al-8wt.%Fe powder mixture that needle-shaped $Al_3Fe$ precipitates was formed in the Al-Fe matrix, and the alloy compact showed enhanced densification and reached its full density with little loss of its fine microstructure. After heat treatment at $500^{\circC}$, it was also shown that the thermal stability of Al-8wt.%Fe alloy fabricated in the present study was enhanced, which was due to its fine microstructure developed by fast densification of SPS.

• 마이크로전자및패키징학회지
• /
• 제12권2호
• /
• pp.141-147
• /
• 2005

나노재료 $TiO_2-SiO_2$는 2-prOH(2-propanol)를 용매로 사용하여 가수분해와 축합반응으로 제조하였고, FT-IR, DSC, XRD, FE-SEM을 사용하여 $TiO_2-SiO_2$의 특성을 조사하였다. FT-IR분석으로부터 Ti-0-Si의 흡수피크에 대해 설명하였으며, DSC분석 결과를 Ozawa 방정식에 적용하여, 결정화에 필요한 활성화 에너지를 계산하였다. 결정학적 특징은 XRD를 이용하여 하소 온도의 변화에 따른 시료의 회절패턴과 반가폭의 변화 등에 관련하여 설명하였다. FE-SEM을 통하여 Ti mol$\%$가 증가할수록 입자크기가 커지는 것을 확인 할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제28권1호
• /
• pp.99-102
• /
• 2007

To prepare freeze-dried ascorbyl palmitate (AsP)-containing liposome which can protect the drug from moisture attack and be used instantly by mixing with water for anti-aging and skin whitening therapy, AsP was encapsulated into liposomes and freeze-dried with trehalose. The freeze-dried liposome formulations were characterized by measuring water contents, particle size, time required for complete reconstitution. With the freeze-dried liposomes, we performed the stability test under accelerated conditions, skin permeation and localization test. The measurement of the time to perfect reconstitution showed that the freeze-dried liposomes can be changed to their initial state rapidly and short term stability test of AsP in reconstituted liposomes under accelerated conditions confirmed that the stability of AsP was considerably enhanced as compared to freshly prepared liposomes. The skin permeation and localization properties of AsP in reconstituted liposomes were not significantly different, indicating that the liposomal structures were maintained before and after freezedrying. In conclusion, the freeze-drying method provided a possible way to overcome the instability issue of AsP induced by the moisture and reproduced similar skin permeation and localization properties as shown by freshly prepared liposomes.