• 한국재료학회지
• /
• 제29권7호
• /
• pp.412-424
• /
• 2019

Global fitting functions for Fe-selective chlorination in ilmenite($FeTiO_2$) and successive chlorination of beneficiated $TiO_2$ are proposed and validated based on a comparison with experimental data collected from the literature. The Fe-selective chlorination reaction is expressed by the unreacted shrinking core model, which covers the diffusion-controlling step of chlorinated Fe gas that escapes through porous materials of beneficiated $TiO_2$ formed by Fe-selective chlorination, and the chemical reaction-controlling step of the surface reaction of unreacted solid ilmenite. The fitting function is applied for both chemical controlling steps of the unreacted shrinking core model. The validation shows that our fitting function is quite effective to fit with experimental data by minimum and maximum values of determination coefficients of $R^2$ as low as 0.9698 and 0.9988, respectively, for operating parameters such as temperature, $Cl_2$ pressure, carbon ratio and particle size that change comprehensively. The global fitting functions proposed in this study are expressed simply as exponential functions of chlorination rate(X) vs. time(t), and each of them are validated by a single equation for various reaction conditions. There is therefore a certain practical merit for the optimal process design and performance analysis for field engineers of chlorination reactions of ilmenite and $TiO_2$.

• 자원리싸이클링
• /
• 제28권2호
• /
• pp.23-30
• /
• 2019

폐자동차 범퍼 파쇄물 재활용을 위하여 색채선별법을 도입하였다. 색채선별법은 기존의 비중, 입도 차이에 의한 선별이 어려운 물질을 색상 차이를 이용한 카메라와 영상 분석기법으로 분리하는 선별법이다. 본 연구에서는 반응표면법 중 BBD (Box-Behnken Design)를 적용하여 실험을 계획하고 최적 조건을 도출하였다. 색채민감도, 피드투입량 및 입자크기의 영향을 분석하였으며, 회귀분석과 통계적인 방법에 기초하여 2차 반응 모델을 획득하였다. $R^2$ 및 p-value는 각각 99.56%, < 0.001로 타당하였으며, 추정된 최적조건은 색채민감도 32%, 피드투입 200 kg/h, 입자크기 33 mm 조건에서 94.1%의 회수율이 나올 것으로 예측하였다. 실제 실험을 통한 회수율은 93.8%로 나타나 해당 모델이 적절함을 확인하였다.

• 한국재료학회지
• /
• 제9권7호
• /
• pp.675-679
• /
• 1999

$PdCl_2$를 촉매제로 사용한 수소환원분위기에서 $Co(OH)_2$ 로부터 약 400nm크기인 구형의 코발트분말 제조에 관한 연구를 수행하였다. 본 실험에서 코발트의 환원반응속도는 표면반응 코어모델식에 잘 일치하였으며 이때 활성화 에너지는 $145~195^{\circ}C$에서 약 55.6KJ/mol 이었다. 또한 코발트의 환원속도는 초기 수소분압의 0.63승에 비례하는 가스화학흡착반응식으로 표시할 수 있다.

• Nuclear Engineering and Technology
• /
• 제42권5호
• /
• pp.600-607
• /
• 2010

Rhenium-186, having a half-life of 90.64 h, is an important radionuclide, used in metabolic radiotherapy and radio immunotherapy. $^{186}Re$ hydroxyethylidene diphosphonate (HEDP) is a new compound used for the palliation of painful skeletal metastases. Its production is achieved via charged-particle-induced reactions; the data are available in EXFOR library. For the work discussed in this paper, production of $^{186}Re$ was done via $^{nat}W(p,n)^{186}Re$ nuclear reaction. Pellets of $^{nat}W$ were used as targets and were irradiated with 15, 17.5, 20, 22.5, 25 MeV proton beams at 5 ${\mu}A$ current. The radiochemical separation was performed by the ion exchange chromatography method. The production yield achieved at 25 MeV was 1.91 $MBq{\cdot}{\mu}A^{-1}{\cdot}h^{-1}$. Excitation functions for the $^{186}Re$ radionuclide, via $^{186}W(p,n)^{186}Re$ and $^{186}W(d,2n)^{186}Re$ reactions were calculated by ALICE-ASH and TALYS-1.0 codes to validate and fit the experimental data and to obtain a recommended set of data for $^{186}W(p,n)^{186}Re$ reaction. Required thickness of the targets was obtained by SRIM code for each reaction.

• Korean Chemical Engineering Research
• /
• 제51권6호
• /
• pp.692-699
• /
• 2013

본 연구에서는 국내 상용 순환유동층 보일러에서 아역청탄과 혼소용 연료로 사용예정인 폐플라스틱 고형연료(RPF)의 열분해 반응특성을 규명하기 위해 열천칭 반응기를 이용하여 등온(350, 375, 400, 425, 450, 500, $850^{\circ}C$) 열분해 실험을 수행하였다. 등온 열분해 결과, 반응온도 구간 $375{\sim}450^{\circ}C$에서의 반응모델 변화는 관찰되지 않았으며, 12개 반응모델 중 1차 화학반응(F1)이 가장 적합한 반응모델로 판명되었다. 이때 Arrhenius 식을 사용하여 계산한 활성화에너지는 39.44 kcal/mol이었으며, Iso-conversional 방법을 적용할 경우 활성화에너지 평균값($0.5{\leq}X{\leq}0.9$ 구간)은 36.96 kcal/mol로 반응모델 결정 여부와 관계없이 유사한 값을 보였다. 한편 순환유동층보일러의 운전온도인 $850^{\circ}C$에서 RPF 입도(d) 변화에 따른 탈휘발 시간은 $t_{dev}=10.38d^{2.88}$으로 표현할 수 있었으며, 보일러 내부에서 RPF가 균일하게 연소되기 위해서는 연료 입도와 평균 분산 거리(x)가 $x{\leq}1.58d^{1.44}$의 상관관계를 만족하여야 함을 확인할 수 있었다.

• 상하수도학회지
• /
• 제29권3호
• /
• pp.407-414
• /
• 2015

The effect of activated carbon particle diameter (i.e. US sieve No. $8{\times}10$ ($d_p{\approx}2.19mm$), $18{\times}20$ ($d_p{\approx}0.92mm$), $50{\times}60$ ($d_p{\approx}0.27mm$) and $170{\times}200$ ($d_p{\approx}0.081mm$) on caffeine adsorption is investigated. BET surface area was increased with decreasing particle diameter ($d_p$), and caffeine adsorption rates increased with decreasing $d_p$. Moreover, pseudo-second order model is predicted the experimental data more accurately than pseudo-first order model, and the fastest rate constant ($k_2$) was $1.7g\;mg^{-1}min^{-1}$ when $d_p$ was 0.081 mm. Surface diffusion coefficient (Ds) was decreased with decreasing $d_p$ based on the minimum sum of square error (SSE). Practically, certain ranges of Ds are acceptable with high reliability ($R^2$) and it is determined that the effect of $d_p$ on Ds is unclear. The effect of pH on caffeine adsorption indicated the dependency of m/L ratio (mass liquid ratio) and $pH_{pzc}$. The $pH_{pzc}$ (i.e. $7.9{\pm}0.2$) was not affected by $d_p$. The higher caffeine adsorption at pH 4 and pH 7 than at pH 10 is due to $pH_{pzc}$, not $pk_a$ of caffeine.

• 한국CDE학회논문집
• /
• 제20권3호
• /
• pp.230-237
• /
• 2015

Soil deformation on the off-load ground is significantly affected by soil conditions, such as soil type, water content, and etc. Thus, the soil characteristics should be estimated for predicting vehicle movements on the off-load conditions. The plate-sinkage test, a widely-used experimental test for predicting the wheel-soil interaction, provides the soil characteristic parameters from the relationship between soil stress and plate sinkage. In this study, soil stress under the plate-sinkage situation is calculated by the DEM (Discrete Element Method) model. We developed a virtual soil bin with DEM to obtain the vertical reaction forces under the plate pressing the soil surface. Also parametric studies to investigate effects of DEM model parameters, such as, particle density, Young's modulus, dynamic friction, rolling friction, and adhesion, on the characteristic soil parameters were performed.

• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.40-54
• /
• 1999

The flame structure and soot formation in the counterflow Ethylene-Air nonpremixed flame are numerically analyzed. The present soot reaction mechanism involves nucleation, surface growth, particle coagulation, and oxidation steps. The gas phase chemistry and the soot nucleation, surface growth reactions are coupled by assuming that the nucleation and soot mass growth has the certain relationship with the concentration of benzene and acetylene. In terms of the centerline velocity and the soot volume fraction, the predicted results are compared with the experimental data. The detailed discussion has been made for the sensitivity of model constants and the deficiencies of the present model. Numerical results indicated that the acetylene addition to the soot surface plays the dominant role in the soot mass growth for the counterflow nonpremixed flame.

• Macromolecular Research
• /
• 제16권5호
• /
• pp.418-423
• /
• 2008

Poly[(R)-3-hydroxy butyrate] (PHB) and methoxy poly(ethylene glycol) (mPEG) were conjugated by the transesterification reaction with tin(II)-ethylhexanoate (Sn(Oct)-II) as a catalyst. Hydrophobic PHB and hydrophilic mPEG formed an amphiphilic block copolymer which was formed with the self-assembled polymeric micelle in aqueous solution. In this study, we tried to determine the optimum ratio of hydrophobic/hydrophilic segments for controlled drug delivery. The particle size and shape of the polymeric micelle were measured by atomic force microscopy (AFM) and transmission electron microscopy (TEM). Their size were 61-102 nm with various block ratios. Griseofulvin was loaded in the polymeric micelle as a hydrophobic model drug. The loading efficiency and release profile were measured by high performance liquid chromatography (HPLC). The model drug in our system was constantly released for 48 h.

• Korean Chemical Engineering Research
• /
• 제55권6호
• /
• pp.798-806
• /
• 2017

제주의 농업폐기물인 감귤박으로 제조한 활성탄(WCAC)을 수용액 중의항생제 dimetridazole (DMZ)를 제거하기 위해 사용하였다. WCAC에의한 DMZ의 흡착을 접촉시간, WCAC의 투여량, WCAC의 입자크기, 온도, pH 및 DMZ 농도와 같은 다양한 조건하에서 연구하였다. DMZ의 흡착량은 온도가 증가하고 입자크기가 감소함에 따라 증가하였다. 또한, pH 4 이상에서는 DMZ의 흡착량이 거의 일정하게 유지되었지만, pH 4 이하에서는 감소하는 경향을 보였다. 흡착등온 결과를 Langmuir, Freundlich, Redlich-Peterson 및 Duinin-Radushkevich (D-R) 등온 모델식에 적용하여 검토한 결과 Redlich-Peterson 등온 모델식에 의해 가장 잘 설명되었다. 흡착속도는 유사 2차 속도 모델에 잘 적용될 수 있었으며, 입자 내 확산 모델의 결과로부터 흡착 과정 동안 막 확산과 입자 내 확산이 동시에 일어나는 것을 알 수 있었다. 열역학적 파라미터는 WCAC에 대한 DMZ의 흡착반응은 흡열반응이고 자발적인 과정으로 진행된다는 것을 나타내었다. 실험결과는 WCAC가 항생제 DMZ를 제거하는데 있어서 값싸고 유용한 흡착제가 될 수 있다는 것을 보여주었다.