• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.803-806
• /
• 2002

The dispersion of Lagrangian fluid particles in a turbulent channel flow is studied by a direct numerical simulation. Four points Hermite interpolation in the homogeneous direction and Chebyshev polynomials in the inhomogeneous direction is adopted by assesing the acceleration of fluid particles. In order to characterize the inhomogeneous Lagrangian statistics, accurate single particle Lagrangian statistics are obtained along the wall normal direction. Integral time scales of Lagrangian velocity can be normalized by Eulerian mean shear stresses.

• 대한화장품학회지
• /
• 제24권3호
• /
• pp.73-80
• /
• 1998

This Study was performed to get the suitable oil dispersion agent by assessment of color strength of organic pigment in non-aqueous systems. Organic pigment is used as a color expression material with other body pigments in the make-up products. But occasionally aggregation or agglomeration occurs for the lack of affinity with medium, This function is the cause of disturbing homogeneous dispersion, and then bring about an instability of products. Our study, research of dispersion mechanism between the pigment and oil phase, has been executed to solve this problem, and find a oil dispersion agent having optimum dispersion condition. Generally dispersion is related to between the solid-liquid mutual properties and electrical phenomena associated with solid-liquid interface. This factor is determined to input energy, milling time, optical properties, particle size, rheological properties, etc. Ideal dispersion state is told that coloring primary solid particle is homogeneously dispersed in medium. Good dispersed colorants are strongly and clearly appeared. We are already known that the particle size of organic pigment, chemical properties and viscosity of medium, refractive index. Consequently We determine the affinity of medium and organic pigment by measuring of color strength in the same mechanical condition. UV-VISIBLE RECORDING SPECTRO PHOTOMETER is used for measuring apparatus. We can decided the dispersion level of oil dispersion agent by measuring absorbance of color strength in the visible range that diluted medium for colloid colorant particles.

• Elastomers and Composites
• /
• 제55권1호
• /
• pp.20-25
• /
• 2020

The effect of the isocyanate index (NCO index) on the particle size and particle size distribution of a waterborne polyurethane dispersion (WPUD) with polycarbonate-diol was determined. The WPUDs were prepared using a conventional acetone process with polycarbonate-polyol (M_n = 2028), 4,4'-methylenebis(cyclohexyl isocyanate) (H₁₂MDI), 2,2-bis(hydroxymethyl) propionic acid (DMPA), and dibutyltin dilaurate catalyst. At NCO index values below 1.5, the number average particle diameter of the WPUDs significantly increased with the NCO index, whereas the particle diameter slightly varied at higher NCO indexes. The dependency of the WPUD viscosity on the NCO index exhibited similar behavior to that of the particle size. The relative values of the full width at half maximum of the WPUD particle distribution curves at various NCO indexes were not influenced by the NCO index.

• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.51-58
• /
• 2020

Many types of optical plastic films are essential in optoelectronics display unit fabrication and it is important to develop high precision laser cutting methods of optical films with extremely low level of film surface contamination by fume particles. This study investigates the effects of suction and blowing air motions with air flow misalignment in removing fume particles from laser cut line by employing random particle trajectory simulation and probabilistic particle generation model. The computational results show fume particle dispersion behaviors on optical film under suction and blowing air flow conditions. It is found that suction air flow motion is more advantageous to blowing air motion in reducing film surface contamination outside designated target margin from laser cut line. While air flow misalignment adversely affects particle dispersion in blowing air flows, its effects become much more complicated in suction air flows by showing different particle dispersion patterns around laser cut line. It is required to have more careful air flow alignment in fume particle removal under suction air flow conditions.

• 한국결정성장학회지
• /
• 제15권6호
• /
• pp.239-243
• /
• 2005

The effect of pH and particle size on the dispersion stability of ultra-fine $BaTiO_3$ suspensions in aqueous medium have been investigated by means of zeta potential, sediment experiments, and powder properties (particle analysis, specific surface area) etc. Zeta potential as a function of pH for two particles of different size increases from -75 to +10 mV with decreasing pH from 8.5 to 1.4. The curve of zeta potential for small particle (150 nm) has slow slope than that of large particle (900nm), giving IEP (isoelectric point) value of pH=1.6 for small particle and pH=1.9 for large particle respectively, which means that it is more difficult to control zeta potential with pH fur small particle than large particle. The dispersion stability of $BaTiO_3$ particles in aqueous medium was found to be strongly related with the agglomeration of colloidal suspensions with time through the sedimentation behaviors of colloidal particles with time and pH value.

• 한국전산유체공학회지
• /
• 제21권2호
• /
• pp.81-89
• /
• 2016

Numerical simulations are carried out for the fluid flow and particle transport around two nearby circular cylinders in a side-by-side arrangement. The present study aims to understand the effects of the particle Stokes number and the spacing between two cylinders on particle dispersion and deposition characteristics. Simulations are based on an Eulerian-Lagrangian approach where the motion of particles is calculated by a Lagrangian approach based on one-way coupling. Results show that the flow structure is very different depending on the cylinder spacing, eventually affecting the overall pattern of particle dispersion significantly. It is also found that particles with smaller Stokes number tend to be distributed more uniformly in the wake of two cylinders, being located even inside the vortex cores. Meanwhile, particle deposition is analyzed in terms of the deposition efficiency and deposition location. The deposition efficiency of particles strongly depends on the Stokes number, whereas it is slightly affected by the cylinder spacing. The deposition location gets wider as the Stokes number increases, and it becomes asymmetric about the center of each cylinder as the cylinders get close.

• 공업화학
• /
• 제21권3호
• /
• pp.311-316
• /
• 2010

본 연구는 높은 분산 안정성을 유지하는 antimony-doped tin oxide (ATO) 분산액을 제조하기 위하여, 습식 볼밀법으로 분쇄시간에 따른 ATO의 입자크기, 입도분포, 분산성의 변화를 고찰하였다. 또한 각각의 습식 볼밀 처리된 ATO 분산액의 pH를 변화시켜 ATO 분산액의 분산 특성을 고찰하였다. 습식 볼밀 분쇄 조건에 의하여 ATO의 입자크기 및 입도 분포 변화는 레이저회절 입도분석기와 주사전자현미경을 이용하여 평가하였고, 습식 볼밀 분쇄 시간 및 pH조건에 따른 ATO 입자의 분산성은 제타전위 측정법과 다중광산란(multiple light scattering)법을 이용하여 평가하였다. 분쇄 조건 중 60 min 동안 처리된 ATO 입자 크기는 30% 이하로 작아지고, $1{\sim}35{\mu}m$에서 $0.1{\sim}5{\mu}m$로 입도분포를 갖는 균일한 입자를 얻을 수 있었다. 그러나 분쇄조건을 60 min 이상 처리한 것은 역분쇄 및 재응집 현상의 발생으로 인하여 한계 분쇄 시간이 나타나는 것을 알 수 있었다. 이러한 결과로부터 ATO 분산액은 습식 볼밀 분쇄 시간을 증가시킬수록 입자 크기가 감소하고 표면 에너지가 증가하여 입자간의 반발력이 커지게 됨을 알 수 있었고, 또한 용액의 pH를 증가시킬수록 입자의 표면 이온화도가 커짐으로 인하여 ATO 분산액의 분산성이 향상되는 것을 알 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제15권12호
• /
• pp.1683-1690
• /
• 2001

A Lagrangian stochastic model is adopted for the calculations of turbulent dispersion in turbulent channel flows. Dispersion of a fluid particle and relative dispersion between two particles released at the sane location are investigated and compared with the classical seating relations for homogeneous turbulence. The viscous effect is realized by adding a Browinian random walk to the calculation of the position of a particle. The near-wall accumulation of particles is examined.

• 한국항공우주학회지
• /
• 제31권3호
• /
• pp.8-14
• /
• 2003

난류혼합층에서 속도비 변화에 따른 입자의 운동형태에 대하여 수치해석적 연구를 수행하였다. Turbulent closure를 목적으로 Subgrid모델을 바탕으로 한 LES를 적용하여고 입자 운동을 해석하기 위해 Lagrangian 방법을 적용하였다. 입자의 직경이 10, 50, 100, 150, 200${\mu}m$인 입자들이 분리판 끝단에서 정지한 상태로 혼합층에 유입이 되고, 큰-크기 와류구조에 영향을 받아 혼합층 내로 확산이 되어진다. 혼합층의 성장특성은 속도비 변화에 매루 민감하여, 입자의 확산은 혼합층의 속도비와 입자 직경의 변화에 따라 거동을 달리함을 알 수 있었다. 또한 Stokes 수와 입자확산의 관계를 나타내었다. 그 결과로 St~1인 경우 입자의 확산이 유동장의 확산보다 빠르게 일어나나, St<<1과 St>>1인 경우는 입자의 확산이 잘 일어나지 않음을 알 수 있다.

• 한국해양공학회지
• /
• 제28권4호
• /
• pp.338-344
• /
• 2014

The purpose of this study was to evaluate the dispersion degree of particles using a nanoindentation test for titanium oxide nanoparticles/epoxy resin nanocomposites. Thus, the effects of the particle size and weight fraction, dispersion agent, and position of the sample on the modulus and degree of particle dispersion in the nanocomposites were investigated. As a result, the dispersion degree of large particles was found to be better than that of smaller particles in composites. It could be found that the aggregation or agglomeration of small particles with large surface energy occurred more easily in nanocomposites because of the large specific surface area. The moduli of the upper side of the film-shaped sample obtained from a nanoindentation test were low scattering, while the values for the bottom side were high scattering. Thus, the dispersion situation of the nanoparticles on the upper side of film-shaped samples could be considered to be better than that for the bottom side. This could be concluded due to the non-uniform nanoparticle dispersion in the same sample. The modulus obtained from nanoindentation test increased slightly with the content of nanoparticles and increased with the indented depth for the same sample. The latter is presumably due to the increase in the accumulated particles facing the indenter with the indented depth. The nanoindentation test was found to be a useful method to evaluate the dispersion status of nanoparticles in nanocomposites.