• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1932-1934
• /
• 1996

Electron transport coefficients are calculated in nitrogen over the E/p range $50{\sim}700\;V\;cm^{-1}$ $Torr^{-1}$ by a Monte Carlo method, using a set of electron collision cross sections measured by authors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1782-1784
• /
• 1997

Using particle-in-cell(PIC) and Monte Carlo collision(MCC), we investigate the trajectory of electrons and the characteristics of D.C. discharge In Wire Ion Plasma Source(WIPS).

• 대한기계학회논문집B
• /
• 제28권3호
• /
• pp.256-264
• /
• 2004

The granular flow has been numerically studied by using DEM(Discrete Element Method). The eve교 particle is checked if it collides neighbor particles, and the next motion of the particle is predicted. The computing time has been drastically reduced by improving the collision check against neighboring particles. The comparison of the present method with ail experiment for the vibrating floor problem shows the good accuracy. The broken tower problem has been calculated to show the good comparison with the other computational result. This DEM(Discrete Element Method) can be a useful tool for constructing the constitute equation of the continuum approach of the granular flow.

• 한국연소학회지
• /
• 제8권2호
• /
• pp.41-49
• /
• 2003

Ultrasonic field of 28kHz with sound pressure level 162dB has been employed to agglomerate the fine soot particle produces in a diffusion flame in a chamber. The agglomeration process has been investigated with digital camcorder and analysed in terms of the decrease of number density with exposure time. From the observation of agglomeration process, the initial agglomeration has been carried out during the short time, and it has been dominated by the orthokinetic collision. Thereafter, a slower agglomeration mechanism, driven by acoustic streaming in the chamber takes over and agglomeraters grew to diameters of several millimeters were levitated at the pressure node of the acoustic wave. And, the circular disk shape of large agglomeraters with the rotational and translational motion is observed.

• 대한화학회지
• /
• 제25권5호
• /
• pp.291-299
• /
• 1981

용액중에서 화학반응을 설명하기 위하여 한개의 대표적인 입자의 반복적 충돌현상까지 고려한 동역학적인 이론을 경구모델을 사용하여 연구하였다. 반응성을 지닌 대표적인 입자의 상공간 밀도의 시간상관함수가 만족시키는 동역학방정식을 유도하였고 이로부터 비활성 용매 S중에서 일어나는 A + B ${\rightleftharpoons$ C + D 형태의 가역반응에 관계되는 반응속도 계수의 인자를 투영연산자방법으로 구하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.242.1-242.1
• /
• 2014

The electron cyclotron resonance plasma source with a belt-type magnet assembly (BMA) is designed for effective plasma confinements. For characterizing the plasma source, the plasma parameters are measured by Langmuir probe. However, the plasma parameters and the motion of charged particles near the ECR zone are not easy to diagnostics, because of the high plasma density and temperature. Thus, as an alternative method, the electromagnetic simulation of the plasma source has been performed by using three-dimensional particle-in-cell and Monte Carlo collisional (PIC-MCC) simulation codes. For considering the limitation of simulation resources and time, the periodic boundary condition is applied and the coulomb collision is neglected. In this paper, we present the results of 3D PIC simulations of ECR plasmas with BMA and we compare them with the experimental results.

• 설비공학논문집
• /
• 제7권3호
• /
• pp.450-460
• /
• 1995

A modified circulating fluidized bed heat exchanger under severe fouling condition is developed. The effects of fouling deposits on the performance of a heat exchanger are investigated. The principle and operating characteristics of a circulating fluidized bed heat exchanger are dicussed. A modified circulating fluidized bed heat exchanger shows more stable operating than the other circulating fluidized bed heat exchanger. The characteristics of self cleaning and heat transfer enhancement of a circulating fluidized bed heat exchanger are studied. The movement of spherical particles in a tube is visualized and heat transfer enhancement and scale reduction mechanism by particles are investigated.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권1호
• /
• pp.39-45
• /
• 2004

The commercial viability of heat exchanger is mainly dependent on their long-term fouling characteristics because the fouling increases the pressure loss and degrades the thermal Performance of a heat exchanger. An experimental study was performed to investigate the characteristics of fluid flow and heat transfer in a fluidized bed heat exchanger with circulating various solid particles. The Present work showed that the flow velocity range for Possible collision between the tube wall and the particles was higher with heavier density solid particles. in audition. the solid particle periodically hitting the tube wall broke the thermal boundary laver. and increased the rate of heat transfer.

• 대한기계학회논문집
• /
• 제16권5호
• /
• pp.1011-1018
• /
• 1992

A series of experiment has been performed on the spray characteristics in a cylindrical confined space with the injection pressure taken as a parameter. By using a single-hole patternator and the Malvern particle sizer, the spray mass flux, drop size and volume concentration distributions along the radial and axial directions were obtained ; the line-of- sight data by Malvern particle sizer have been converted to the ring-of-sight data by using the tomographical transformation techniqe. The experimental results show that, due to the restriction on the ambient gas entrainment by the wall boundary, the effective spray angle is increasing. The spray drops were measured to be smaller in the confined space because of a large number of floating small drops by recirculation of the gas phase and the breakup of large drops by the wall collision. Also the details on the flow behavior of the confined spray are discussed.

• 상하수도학회지
• /
• 제16권6호
• /
• pp.663-669
• /
• 2002

Electro-flotation (EF) has shown advantages, such as a high removal efficiency and easy control of bubble generation, over dissolved air flotation. However, the fundamental characteristics of the process have not been investigated in detail. According to recent modeling results from trajectory analysis, the size of the bubble is one of the most important factors that affect the efficiency of collision between bubble and particle. In this paper, the size characteristics of bubbles generated from EF under various conditions are measured using a new method for bubble size measurement, the Particle Counter Method (PCM). The size of the generated bubbles was found to be constant with respect to applied voltage but to vary with the electrode materials. These results and their implications are discussed.