• 한국지반신소재학회논문집
• /
• 제16권4호
• /
• pp.57-66
• /
• 2017

준설 매립 부지의 최종 계획고를 얻기 위한 초기 준설 매립량과 매립두께를 결정하고 자중압밀에 소요되는 시간을 예측하기 위해 인천지역 항로 준설 시료에 대한 자중압밀시험과 공학적 특성을 분석하였다. 준설투기된 시료의 시간경과에 따른 함수비, 간극비 및 체적변화비에 관한 인자를 Yano의 경험식을 이용하여 평가하였다. 세립분 함유율이 낮은 경우 침강압밀계수의 변화폭이 작게 나타났으며, 세립분 함유율 50%에서 가장 크게 나타났다. 자중압밀에 따른 체적변화비를 이용하여 준설매립공사에 제시된 입도별 유보율의 포괄적인 측면을 보완할 수 있는 세립분 함유율에 따른 유보율을 산정하여 제시하였다.

• 한국환경복원기술학회지
• /
• 제6권6호
• /
• pp.49-55
• /
• 2003

Total phosphorous removal rate was examined of a subsurface-flow treatment wetland system which was constructed on floodplain in the down reach of the Kwangju Stream in Korea from May to June 2001. Its dimensions were 29 meter in length, 9 meter in width and 0.65 meter in depth. A bottom layer of 45 cm in depth was filled with crushed granite with about 15~30 mm in diameter and a middle layer of 10 cm in depth had pea pebbles with about 10 mm in diameter. An upper layer of 5 cm in depth contained course sand. Reeds(Phragmites australis) were transplanted on the surface of the system. They were dug out of natural wetlands and stems were cut at about 40 cm height from their bottom ends. Water of the Kwangju Stream flowed from a submerged dam into it via a pipe by gravity flow and treated effluent was funneled back into the Stream. The number of reed stems increased from 80 stems/$m^2$ in July 2001 to 136 stems/$m^2$ in September 2001. The hight of stems was 44.2 cm in July 2001 and 75.3 cm in September 2001. The establishment of reeds at early operating stage of the system was good. Volume and water quality of inflow and outflow were investigated from July 2001 through December 2001. The average inflow was 40 $m^3$/day and hydraulic detention time was about 1.5 days. The concentration of total phosphorous n influent and effluent was 0.83 and 0.33 mg/L, respectively. The removal rate of total phosphorous averaged about 60%. The removal efficiency was slightly higher, compared with that of subsurface-flow wetlands operating in North America, whose retention rate of total phosphorous was reported to be about 56%. The good abatement rate could be attributed to sedimentation of particle phosphorous in pores of the media and adsorption of phosphorous to the biofilm developed on the surface of them. Increase of standing density of reeds within a few years will develop root zones which may lead to increment in the phosphorous retention rate.

• 공업화학
• /
• 제29권3호
• /
• pp.258-263
• /
• 2018

본 연구에서는 전자산업폐수에 함유되어 있는 불소성분을 제거하기 위하여 미세 침강성 석회석을 적용해보고자 하였다. 석회석의 입자크기는 평균 $0.96{\mu}m$이었으며, 질량 기준으로 70%가 함유된 수용액상의 pH는 10이었다. 현탁액의 침강속도는 2 mL/hr로 나타났다. 본 연구의 시험용 석회석 수용액은 폐수 중화와 불소이온 제거능력 면에서 기존의 액상소석회와 동등 이상의 성능을 보여주었다. 추가적인 알칼리 증량제의 투입양에 따라 pH 7에 도달할 수 있는 시험용 칼슘원의 양은 기존의 석회수보다 적었다. 또한 불화수소로 고정시킬 수 있는 양도 미분말 석회석이 석회수보다 큰 것으로 나타났다. 또한, Minteq 평형모델링으로부터 다양한 불소와 칼슘화합물 형성이 예상되었다.

• Journal of Preventive Medicine and Public Health
• /
• 제31권3호
• /
• pp.414-423
• /
• 1998

Metal fume fever has been known as an occupational disease is induced by intense inhalation of fresh metal fume with a particle size smaller than $0.5{\mu}m\;to\;1{\mu}m$. The fumes originate from heating metals beyond their boiling point, as happens, for example, in welding operations. Oxidation usually accompanies this process. In most cases, this syndrome is due to exposure to zinc oxide fumes; however, other metals like copper, magnesium, cadmium, manganese, and antimony are also reported to produce such reactions. Authors report a case of metal fume fever suspected to be associated with copper fume inhalation. The patient was a 42-year-old male and was a smoker. He conducted inert gas tungsten arc welding on copper-coated materials without safety precautions such as a protective mask and adequate ventilation. Immediately after work, he felt metallic taste in his mouth. A few hours after welding, he developed headache, chilling sensation, and chest discomfort. He also complained of myalgia, arthralgia, feverish sensation, thirst, and general weakness. Symptoms worsened after repeated copper welding on the next day and subsided gradually following two weeks. Laboratory examination showed a transient increase of neutrophil count, eosinophilia, elevated erythrocyte sedimentation rate, and positive C-reactive proteinemia. Blood and urine copper level was also increased compared to his wife. Before this episode, he experienced above complaints several times after welding with copper materials but welding of other metals did not produce any symptoms. It was suggested that copper fume would have induced metal fume fever in this case. Further investigations are needed to clarify their pathogenic mechanisms.

• 한국토양비료학회지
• /
• 제15권4호
• /
• pp.207-212
• /
• 1982

1950년대(年代)의 핵실험(核實驗)에 의(依)하여 생긴 방사능(放射能) 동위원소(同位元素)는 토양(土壤)이나 퇴사(堆砂)에 다양(多樣)하게 포함(包含)되었다. 이들 방사성(放射性) 동위원소(同位元素) 중(中)에서 $^{137}Cs$은 미세토양(微細土壤) 입자(粒子)에 고착(固着)하는 성질(性質)이 크고 방사능(放射能)의 발산량이 많고 균일(均一)하기 때문에 퇴사과정(堆砂過程)을 평가하는데 이용(利用)이 가능(可能)하다. 미국 Louisiana 주(州) Larto호(湖)에서, 낙진(落塵)된 $^{137}Cs$에 의(依)해 1958년(年) 이내로 퇴사속도(堆砂速度)를 측정(測定)한 바에 의(依)하면 연평균(年平均) 1.6~3.1cm로 퇴사(堆砂)되고 있으며, 가장 많이 퇴사(堆砂)된 곳은 70cm까지 퇴사(堆砂)되었음이 밝혀졌다. 또한 해를 거듭할수록 퇴사(堆砂)되는 율(率)이 적어지고 있으며, 퇴사(堆砂)의 입도분포(粒度分布)는 호수(湖水) 전체에 거의 $20{\mu}$이하(以下)의 미세입자(微細粒子)가 분포(分布)하고 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1332-1343
• /
• 2008

The purpose of this study was to investigate the feasibility of using sedimentation calcium carbonate production based on microorganism activities in the strength manifestation of various soil conditions including ground. For analysis and comparison of microbial cementation soil's strength, unconfined compression test was executed by each content of soil(S), water(W), microorganism(B), microorganism and deposit (BF), microorganism, admixture and deposit(BCF) at specimen. The result, the strength of SB(soil+microorganism) and SBF(soil+microorganism+deposit) increased about 8%, 15% than SW(soil+water). Also, initial strength increased. But the strength of SBC(soil+microorganism+admixture) and SBCF(soil+microorganism+deposit+admixture) increased about 71%, 115% than SW(soil+water). The results of the SEM analysis, leading to the formation of an adhesive substance layers at the surface and resulting in firm particle configuration. The XRD examination of the sediment resulting from the reaction between the microorganism and the deposit control agent confirmed the presence of a type of calcium carbonate ($CaCo_3$) vaterite, which affects soil strength formation, as well as sodium silicate, silicides and so forth. This indicates that microorganism plays an important role in the production of carbonate ($CaCo_3$), sodium silicate and silicides. It affects to revelation of ground strength.

• 한국전기전자재료학회논문지
• /
• 제30권12호
• /
• pp.782-787
• /
• 2017

There is growing interest in power inductors in which metal soft magnetic powder and epoxy resin are combined. In this field, the process technology for increasing the packing density of magnetic particles in an injection molding process is very important. However, little research has been reported in this regard. In order to improve the packing density, we investigated and compared the sedimentation heights of pastes for three types of soft magnetic alloy powders as a function of the mixing ratios and the type of resin used. Experimental results showed that the packing density was the highest (71.74%) when the mixing ratio was 80 : 16 : 4 (Sendust : Fe-S : CIP) according to the particle size using an SE-4125 resin. In addition, the packing density was found to be inversely related to the layer separation distance. As a result, it was confirmed that the dispersion of solid particles in the paste was important for curing; however, the duration of the curing process can greatly affect the packing density of the final composite.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.258-258
• /
• 2017

We received 73 wheat resources from CIMMYT for analysis of agricultural characteristics and qualities of them. We sowed 73 lines and 4 Korean varieties in fall and spring to compare differences of wheat traits between fall and spring seeding. The heading and maturity date of fall seeding lines has coming faster average 18 days than spring seeding lines. Fall seeding lines have more number of spike per $m^2$ and grain number of spike. Spike and awn length of spring seeding lines were shorter than fall seeding lines and stem length was variable to varieties in both condition. Protein contents of five of 73 lines, Jokyoung and Jopoom varieties decreased but the others increased. The sedimentation values of 34 lines include Jokyoung and falling number (F/N) of 44 lines include two varieties, Keumkang and Jokyoung, decreased but the others increased, respectively. Particle size was presented that most spring seeding lines were bigger. However, when it sowed in fall, the lightness (L) of wheat flour was lighter. Consequently, we confirmed when it was sowed in spring, agricultural traits and qualities of wheat got weak.

• 한국광물학회지
• /
• 제26권2호
• /
• pp.65-80
• /
• 2013

독도로부터의 거리 및 수심에 따라 채취된 표층 퇴적물에 대하여 입도분석, 광물분석, 유기물 분석 및 미화석 분석 결과를 이용하여 독도 인근 해저의 퇴적 기작 및 유기 퇴적물의 분포를 규명하였다. 독도 인근 해저 퇴적물은 자갈 및 사질이 우세하며, 끌림에 의한 퇴적 작용이 주를 이루는 반면에 독도와 거리가 멀어짐에 따라 실트와 머드의 비율이 증가하며 점토광물과 장석 등의 광물 성분의 변화를 보이고 뜬짐에 의한 퇴적이 우세해지는 경향을 보인다. 퇴적물에 포함된 유기 퇴적물의 군집 조성 또한 큰 변화를 보이는데, 연안 퇴적물에서는 해양 기원의 유기 퇴적물이, 심해 퇴적물에서는 육상 기원의 유기 퇴적물이 우점한다. 이러한 유기 퇴적물의 군집 변화는 퇴적물의 입도에 큰 영향을 받는 것으로 밝혀졌으며 유기 퇴적물중 높은 화분 농집도는 심해 퇴적물의 유기탄소 함량을 증가시키는데 중요한 역할을 하는 것으로 판단된다.

• 한국재료학회지
• /
• 제26권3호
• /
• pp.149-153
• /
• 2016

Nanosized zeolites were prepared in an autoclave using tetraethoxysilane (TEOS), tetrapropylammonium hydroxide (TPAOH), and $H_2O$, at various hydrothermal synthesis temperatures. Using transmission electron microscopy and particle size analysis, the nanopowder particulate sizes were revealed to be 10-300 nm. X-ray diffraction analysis confirmed that the synthesized nanopowder was silicalite-1 zeolite. Using atomic layer deposition, the fabricated zeolite nanopowder particles were coated with nanoscale $TiO_2$ films. The $TiO_2$ films were prepared at $300^{\circ}C$ by using $Ti[N(CH_3)_2]_4$ and $H_2O$ as precursor and reactant gas, respectively. In the TEM analysis, the growth rate was ${\sim}0.7{\AA}/cycle$. Zeta potential and sedimentation test results indicated that, owing to the electrostatic repulsion between $TiO_2$-coated layers on the surface of the zeolite nanoparticles, the dispersibility of the coated nanoparticles was higher than that of the uncoated nanoparticles. In addition, the effect of the coated nanoparticles on the photodecomposition was studied for the irradiation time of 240 min; the concentration of methylene blue was found to decrease to 48%.