• 제목/요약/키워드: Particle Focusing

검색결과 107건 처리시간 0.026초

산화물 혼합상이 페라이트계 P/M스테인리스강의 고온산화 및 전기저항 안정성에 미치는 영향 (The Effect of Oxide Compound on Electrical Resistivity and Oxidation Stability in High-temperature for Ferritic P/M Stainless Steel)

  • 박진우;고병현;정우영;박동규;안인섭
    • 한국분말재료학회지
    • /
    • 제23권3호
    • /
    • pp.240-246
    • /
    • 2016
  • In order to improve the high-temperature oxidation stability, sintered 434L stainless steel is studied, focusing on the effect of the addition of metallic oxides to form stable oxide films on the inner particle surface. The green compacts of Fecralloy powder or amorphous silica are added on STS434L and oxidized at $950^{\circ}C$ up to 210 h. The weight change ratio of 434L with amorphous silica is higher than that of 434L mixed with Fecralloy, and the weight increase follows a parabolic law, which implies that the oxide film grows according to oxide diffusion through the densely formed oxide film. In the case of 434L mixed with Fecralloy, the elements in the matrix diffuse through the grain boundaries and form $Al_2O_3$ and Fe-Cr oxides. Stable high temperature corrosion resistance and electrical resistivity are obtained for STS434L mixed with Fecralloy.

오픈액세스 학술지 출판에서 대학도서관의 역할에 대한 고찰 - COPE 참가 대학도서관을 중심으로 - (A Study on the Roles of Academic Libraries for Open Access Journal Publishing: Focusing on the Academic Libraries Participated in COPE)

  • 정경희
    • 한국비블리아학회지
    • /
    • 제23권4호
    • /
    • pp.45-69
    • /
    • 2012
  • 본 연구는 오픈액세스 출판에서 대학도서관이 어떠한 역할을 하고 있는지를 출판비용 지원과 그 외 서비스로 구분하여 살펴보았다. 그 결과 대학도서관은 COPE와 $SCOAP^3$라는 협력프로그램에 참여하거나 또는 개별적인 도서관차원에서 오픈액세스 학술지 출판비용을 지원하고 있었다. COPE 참여 대학도서관의 경우 하이브리드 오픈액세스 학술지에 투고하는 논문에는 APC 지원을 거의 하지 않고 있었다. 이에 비해 개별적으로 기금을 지원하는 대학도서관은 하이브리드 학술지 투고논문에 대한 APC 지원에 조금 더 관대하였다. 또한 기금지원이외의 오픈액세스 학술지 출판과 관련하여 대학도서관은 저자의 논문투고 과정에서의 저작권 협상 지원, 발행과정의 기술적인 측면, 배포를 확산시키는 역할을 담당하고 있었다.

실험계획법에 의한 가솔린 GDI+MPI 엔진의 연비 및 성능향상 관점에서의 운전영역별 연료분사 전략에 관한 연구 (A Study of GDI+MPI Engine Operation Strategy Focusing on Fuel Economy and Full Load Performance using DOE)

  • 김도완;이승환;임종석
    • 한국자동차공학회논문집
    • /
    • 제22권3호
    • /
    • pp.42-49
    • /
    • 2014
  • The gasoline direct injection (GDI) system is considerably spreading in automotive market due to its advantages. Nevertheless, since GDI system emit higher particle matter (PM) due to its combustion characteristics, it is difficult to meet strengthened emission regulation in near future. For this reason, a combined GDI with MPI system, so-called, dual injection (DUI) system is being investigated as a supplemental measure for the GDI system. This paper focused on power and fuel consumption effect by injection mode strategy of DUI system in part load and idle engine operating condition. In this study, port fuel injectors are installed on 2.4 liters GDI production engine in order to realize DUI system. And, at each injection mode, DOE (design of experiment) method is used to optimize engine control parameters such as dual injection ratio, start of injection timing, end of injection timing, CAM position and so on. As a consequence, DUI mode shows slightly better or equivalent fuel efficiency compared to conventional GDI engine on 9 points fuel economy mode as well as MPI mode shows less fuel consumption than GDI mode during idle operation. Furthermore, DUI system shows improvement potential of maximum 2.0% fuel consumption and 1.1% performance compared to GDI system in WOT operating condition.

도시지역 사무실내 공기 중 환경담배연기의 측정 - 흡연이 부유먼지 농도에 미치는 영향을 중심으로 - (Measurement of Environmental Tobacco Smoke in the Air of Offices in Urban Areas - Focusing on the Impact of Smoking on the Concentrations of Suspended Particles -)

  • 백성옥;박상곤
    • 한국대기환경학회지
    • /
    • 제20권6호
    • /
    • pp.715-727
    • /
    • 2004
  • This study was carried out to evaluate non-smoker's exposure levels to environmental tobacco smoke (ETS) in the air of offices in urban areas. A total of 65 offices were selected from two large cities, i.e. Daegu and Daejeon. The field sampling was conducted repeatedly in summer (1999) and winter (1999~2000). The measured ETS markers included respirable suspended particles (RSP as PM$_{40}$ ), vapor and particulate phase ETS markers, including nicotine, 3-ethnyl pyridine (3-EP), ultraviolet absorbing particulate matter (UVPM), fluorescing particulate matter (FPM), and solanseol in ETS particles (SolPM). RSP was measured gravimetrically by a microbalance. The particle samples were then used for the determination of particulate ETS markers by HPLC, while vapor phase markers determined by GC/NPD. The analytical methods were validated for repeatability, linearity, detection limits, and duplication precision. The concentrations of RSP and other ETS markers were significantly higher in smoking offices than non-smoking offices. Despite the similar smoking strength in each office for different seasons, the concentration levels of ETS components appeared to be higher in winter than summer. The contributions of ETS to RSP concentrations based on SolPM, FPM, and UVPM methods were estimated to be in the range of 15.2 ~ 25.3% in smoking offices, whereas 2.4 ~ 15.9% in non-smoking offices. The cooling and heating types did not affect significantly the concentrations of RSP and other ETS markers. Finally, further research issues were suggested to obtain more scientific information on the non-smoker's exposure to ETS with respect to the frame of risk assessment..

Investigation of flow regime in debris bed formation behavior with nonspherical particles

  • Cheng, Songbai;Gong, Pengfeng;Wang, Shixian;Cui, Jinjiang;Qian, Yujia;Zhang, Ting;Jiang, Guangyu
    • Nuclear Engineering and Technology
    • /
    • 제50권1호
    • /
    • pp.43-53
    • /
    • 2018
  • It is important to clarify the characteristics of flow regimes underlying the debris bed formation behavior that might be encountered in core disruptive accidents of sodium-cooled fast reactors. Although in our previous publications, by applying dimensional analysis technique, an empirical model, with its reasonability confirmed over a variety of parametric conditions, has been successfully developed to predict the regime transition and final bed geometry formed, so far this model is restricted to predictions of debris mixtures composed of spherical particles. Focusing on this aspect, in this study a new series of experiments using nonspherical particles have been conducted. Based on the knowledge and data obtained, an extension scheme is suggested with the purpose of extending the base model to cover the particle-shape influence. Through detailed analyses and given our current range of experimental conditions, it is found that, by coupling the base model with this scheme, respectable agreement between experiments and model predictions for the regime transition can be achieved for both spherical and nonspherical particles. Knowledge and evidence from our work might be utilized for the future improvement of design of an in-vessel core catcher as well as the development and verification of sodium-cooled fast reactor severe accident analysis codes in China.

Solution-Processed Inorganic Thin Film Transistors Fabricated from Butylamine-Capped Indium-Doped Zinc Oxide Nanocrystals

  • Pham, Hien Thu;Jeong, Hyun-Dam
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권2호
    • /
    • pp.494-500
    • /
    • 2014
  • Indium-doped zinc oxide nanocrystals (IZO NCs), capped with stearic acid (SA) of different sizes, were synthesized using a hot injection method in a noncoordinating solvent 1-octadecene (ODE). The ligand exchange process was employed to modify the surface of IZO NCs by replacing the longer-chain ligand of stearic acid with the shorter-chain ligand of butylamine (BA). It should be noted that the ligand-exchange percentage was observed to be 75%. The change of particle size, morphology, and crystal structures were obtained using a field emission scanning electron microscope (FE-SEM) and X-ray diffraction pattern results. In our study, the 5 nm and 10 nm IZO NCs capped with stearic acid (SA-IZO) were ligand-exchanged with butylamine (BA), and were then spin-coated on a thermal oxide ($SiO_2$) gate insulator to fabricate a thin film transistor (TFT) device. The films were then annealed at various temperatures: $350^{\circ}C$, $400^{\circ}C$, $500^{\circ}C$, and $600^{\circ}C$. All samples showed semiconducting behavior and exhibited n-channel TFT. Curing temperature dependent on mobility was observed. Interestingly, mobility decreases with the increasing size of NCs from 5 to 10 nm. Miller-Abrahams hopping formalism was employed to explain the hopping mechanism insight our IZO NC films. By focusing on the effect of size, different curing temperatures, electron coupling, tunneling rate, and inter-NC separation, we found that the decrease in electron mobility for larger NCs was due to smaller electronic coupling.

Conjugated Linoleic Acid (CLA) Production in the Rumen -Roles of Butyrivibrio fibrisolvens A38

  • Kim, Dae-Ok;Kim, Tae-Wan;Heo, Ho-Jin;Imm, Jee-Young;Hwang, Han-Joon;Oh, Sejong;Kim, Young-Jun
    • 한국축산식품학회지
    • /
    • 제24권3호
    • /
    • pp.303-309
    • /
    • 2004
  • Conjugated linoleic acid (CLA) is currently under intensive investigation due to its health benefits. A great deal of interest has been paid to the possible health-promoting roles of CLA, but there are not many studies available on the mechanism of CLA production by ruminal microorganisms. CLA is produced as an intermediate of the characteristic biohydrogenation process of linoleic acid(LA) in the rumen and its production has direct relationship to numerous environmental factors including particle association, substrate concentration, forage-to-grain ratio, pH, ionopore, bacterial cell density, etc. Some of these factors were known to affect hydrogenating activities of Butyrivibrio fibrisolvens A38 which is an active rumen bacterium in CLA production. Dairy cow is a main source of CLA, and its level could be increased by dietary manipulation changing the physiological environment of rumen bacteria such as B. fibrisolvens A38. Therefore, the effects of various factors on. ruminal biohydrogenation should be carefully considered to optimize not only CLA production, but also other fatty acid metabolism, both of which are directly affecting nutritional quality and functionality of dairy products. In this review, the relationship between various environmental factors and ruminal CLA production is discussed focusing on the CLA production of B. fibrisolvens A38.

3P기반 거대과학 기술개발 전략수립을 위한 연구 : 중이온 입자 가속기 핵심부품 국산화 전략수립 사례를 중심으로 (A Study for Establishment of 3P-based Big Science and Technology Development Strategy: Focusing on Localization Strategies of Core Components for Heavy-Ion Particle Accelerator)

  • 윤성욱;김유빈;최원재;도현수;권순원
    • 한국기술혁신학회:학술대회논문집
    • /
    • 한국기술혁신학회 2017년도 추계학술대회 논문집
    • /
    • pp.1533-1549
    • /
    • 2017
  • 정부 R&D성과의 질적 수준을 제고하고 중장기 국가 재정사업의 효율성을 높이기 위한 각 연구 기관의 시도들이 있어 왔다. 연구사업의 발굴, 기획 및 수행에 있어 효과적인 정부 R&D 예산의 배분, 우선순위를 도출, 기술개발 전략 수립을 하는 것이 매우 중요해지고 있다. 정부 재정사업인 국가 R&D사업은 국가 기간산업을 활성화하고 경제발전을 수반할 수 있는 중요한 모멘텀으로서의 역할을 하고 있다. 또한, 국가 R&D사업의 한 축인 거대과학은 최첨단 기술의 개발과 미래성장동력의 발굴이라는 대명제로 그 중요성이 강조되고 있다. 거대과학 연구는 그 분야의 특수성으로 인해 대학의 과학자, 공공 연구기관의 연구원, 기업의 엔지니어가 함께 참여하여야 하고 대규모 국가 예산을 동원하는 과학 연구 사업이다. 이는 대규모 예산을 기반으로 하고 있기에 집중적 투자가 수반된다면 단기적으로 기초과학의 발전을 이뤄낼 수 있다. 이것은 산업발전에 밑거름이 되어 그 분야 자체로 하나의 산업생태계를 구성하고 요소 기술들의 응용으로 파생기술이 전파된다면 새로운 신산업 창출 등 국가산업에 많은 혜택을 줄 수 있다. 하지만 많은 인력과 대규모 투자 그리고 중장기 프로젝트라는 특성으로 인해 실패 가능성도 높아 전략적 선택 및 추진이 필요하다. 따라서 본 논문에서는 거대과학의 기술개발전략의 수립을 위하여 중이온 입자가속기 핵심부품 국산화 전략수립 사례를 중심으로 효율적인 R&D추진 방안을 도출해보고자 한다. 또한, 논문, 특허를 기반으로 한 3P분석을 통하여 중이온 가속기 핵심부품의 국산화 전략을 제안하고, 추진 우선순위 및 전략을 제시하고자 한다.

  • PDF

PIV 및 컬러 쉴리렌 기법을 이용한 초음속 제트 관측 (PIV Measurement and Color Schlieren Observation of Supersonic Jets)

  • 이재혁;;김태호;김희동
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2017년도 제48회 춘계학술대회논문집
    • /
    • pp.604-605
    • /
    • 2017
  • 본 연구는 C-D 노즐로부터 발생하는 초음속 제트 유동을 가시화하는데 목표가 있다. 본 실험에서 PIV를 이용하여 정량적인 제트의 결과를 얻어 쉴리렌 기법을 통해 얻은 정성적 결과와 비교하여 나타내었다. 컬러 쉴리렌은 $0.5{\mu}s$의 스파크 광원을 이용하였다. $M_d=2.0,2.2$의 C-D 노즐에 대해 다양한 압력비($p_0/p_b=5$, 6, 7, 8)를 적용하여 발생하는 제트에 대해 가시화 실험을 수행하였다. 가시화 결과, 제트의 주된 특성인 과팽창 제트, 부족팽창 제트, 음파 등이 관측 되었다.

  • PDF

편광을 통한 수화한 소행성 연구 (Study of Hydrated Asteroids via Polarimetry: Correlation between Polarimetric Properties and the Degree of Aqueous Alteration of Hydrated asteroids)

  • 김주연
    • 천문학회보
    • /
    • 제46권1호
    • /
    • pp.46.1-46.1
    • /
    • 2021
  • Hydrated asteroids get widespread attention for the evolution of water in the Solar System, especially thanks to the recent successes of the Hayabusa2 and OSIRIS-REx space missions. The target asteroids of these missions are believed to be fragments that have experienced aqueous alteration in their parent bodies [3]. Although hydrated asteroids have been studied well via spectroscopy, focusing on the 0.7 um or the 2.7 um absorption bands [2, 3, 4], polarimetric properties of these asteroids have rarely been investigated. In this study, we conducted a polarimetric observation of 18 C-complex main-belt asteroids with the 1.6-m Pirka telescope at the Nayoro Observatory of Hokkaido University, Japan. We used a polarimetric imaging mode of the Multi-Spectral Imager (MSI) with the standard Rc-band filter (the central wavelength at 0.64 um) [5]. As a result, we found that all of these hydrated asteroids indicate deep negative branches of their polarimetric profiles. Accordingly, the hydrated asteroids have the polarization minima (Pmin), whose values are significantly lower than any other taxonomic types of asteroids (including C-group asteroids). Because Pmin depends on albedo, particle size, and porosity of the surface materials [1], we suspect that hydrated asteroids are distinctive from other asteroids in terms of these physical properties. In this presentation, we introduce our polarimetric observation and findings. We discuss why hydrated asteroids indicate such low Pmin values, comparing Pmin with spectral features at 0.7 um and 2.7 um based on the observation results.

  • PDF