• Nuclear Engineering and Technology
• /
• v.55 no.9
• /
• pp.3301-3312
• /
• 2023

This study incorporates a high-fidelity transient analysis solver based on multigroup CMFD in the MOC code STREAM. Transport modeling with heterogeneous geometries of the reactor core increases computational cost in terms of memory and time, whereas the multigroup CMFD reduces the computational cost. The reactor condition does not change at every time step, which is a vital point for the utilization of CMFD. CMFD correction factors are updated from the transport solution whenever the reactor core condition changes, and the simulation continues until the end. The transport solution is adjusted once CMFD achieves the solution. The flux-weighted method is used for rod decusping to update the partially inserted control rod cell material, which maintains the solution's stability. A smaller time-step size is needed to obtain an accurate solution, which increases the computational cost. The adaptive step-size control algorithm is robust for controlling the time step size. This algorithm is based on local errors and has the potential capability to accept or reject the solution. Several numerical problems are selected to analyze the performance and numerical accuracy of parallel computing, rod decusping, and adaptive time step control. Lastly, a typical pressurized LWR was chosen to study the rod-ejection accident.

• Journal of Distribution Science
• /
• v.20 no.3
• /
• pp.33-43
• /
• 2022

Purpose: More and more marketers use social media platforms to create and spread information called Marketer Generated Content (MGC) to inform consumers of products. MGC often embeds product purchase links, thus directing consumers to online distribution channels for online purchases. This study examined the effect of social media MGC on consumers' willingness to buy online in the anchor of consumers' perspective to answer the question of "how social media generated content support corporate online distribution". Research design, data, and methodology: According to the means-end-chain theory, we introduce perceived value and continuous following intention as chain mediators to explain the mechanism of MGC influence on consumers' online purchase intention and consider product type to discuss boundary conditions. Two experiments were designed to test hypothesizes. Results and Conclusion: First, emotional MGC (vs. informational MGC) has lower (higher) perceived utility (hedonic) value. Second, perceived value has a significant mediate role in the effect of MGC on continuous following intention. Third, perceived value and continuous following intention significantly and sequentially mediated the effect of MGC on online purchase intention. Through the sequential mediations of perceived utility value and continuous following intention, Informational MGC of search products significantly increase online purchase intentions. Another parallel sequential mediation, including perceived hedonic, emotional MGC of experience products, partially enhanced online purchase intentions. Finally, this study gives implications for how corporates can use social media MGC to promote product sales online.

• Journal of Biosystems Engineering
• /
• v.41 no.2
• /
• pp.108-115
• /
• 2016

Purpose: Radio frequency (RF) heating is a promising thawing method, but it frequently causes undesirable problems such as non-uniform heating. This can occur because of the food shape, component distribution, and initial temperature differences between food parts. In this study, RF heating was applied to the thawing of cylindrically shaped pork sirloin by changing the shape of electrodes and the surrounding temperature. Methods: Curved electrodes were utilized to increase the thawing uniformity of cylindrically shaped frozen meat. Pork sirloin in the shape of a half-circle column was frozen in a deep freezer at $-70^{\circ}C$ and then thawed by RF heating with flat and curved electrodes. In order to prevent fast defrosting of the food surface by heat transfer from air to the food, the temperature of the thawing chamber was varied by -5, -10, and $-20^{\circ}C$. The temperature values of the frozen pork sirloin during RF thawing were measured using fiber-optic thermo sensors. Results: After multiple applications of curved electrodes resembling the food shape, and a cooled chamber at $-20^{\circ}C$ the half-cylindrically shaped meat was thawed without surface burning, and the temperature values of each point were similarly increased. However, with the parallel electrode, the frozen meat was partially burned by RF heating and the temperature values of center were overheated. The uniform heating rate and heat transfer prevention from air to the food were crucial factors for RF thawing. In this study, these crucial factors were accomplished by using a curved electrode and lowering the chamber temperature. Conclusions: The curved shape of the electrode and the equipotential surface calculated from the modeling of the parallel capacitor showed the effect of uniform heating of cylindrically shaped frozen food. Moreover, the low chamber temperature was effective on the prevention of the surface burning during RF thawing.

• Investigative Magnetic Resonance Imaging
• /
• v.14 no.1
• /
• pp.56-63
• /
• 2010

Purpose : DIR image is relatively free from susceptibility artifacts therefore, DIR image can make it possible to reliably measure cortical thickness/volume. One drawback of the DIR acquisition is the long scan time to acquire the fully sampled 3D data set. To solve this problem, we applied a parallel imaging method (GRAPPA) and verify the reliability of using the volumetric study. Materials and methods : Six healthy volunteers (3 males and 3 females; age $25.33{\pm}2.25$ years) underwent MRI using the 3D DIR sequence at a 3.0T Siemens Tim Trio MRI scanner. GRAPPA simulation was performed from the fully sampled data set for reduction factor 2. Data reconstruction was performed using MATLAB R2009b. Freesurfer v.4.3.0 was used to evaluate the cortical thickness of the entire brain, and to extract white matter information from the DIR image, Analyze 9.0 was used. The global cortical thickness estimated from the reconstructed image was compared with reference image by using a T-test in SPSS. Results : Although reduced SNR and blurring are observed from the reconstructed image, in terms of segmentation the effect was not so significant. The volumetric result was validated that there were no significant differences in many cortical regions. Conclusion : This study was performed with DIR image for a volumetric MRI study. To solve the long scan time of 3D DIR imaging, we applied GRAPPA algorithm. According to the results, fast imaging can be done with reduction factor 2 with little loss of image quality at 3.0T.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.3
• /
• pp.900-907
• /
• 2004

The antiproliferative effect of the water extract of the branch and root bark of Ulmi Pumilae Cortex(WEUPC) was investigated on the p53-negative human leukemia cell line (HL-60). A dose- and time-dependent inhibition of cell growth was observed; this effect appears to be due to induction of apoptosis. Involvement of oxidative stress is indicated by a dose-dependent increase in intracellular reactive oxygen species levels. In addition. anti-apoptic effect was observed in the cells simultaneously treated with WEUPC and the anti-oxidant N-acetylcysteine. WEUPC did not affect the anti-apoptotic Bcl-2 and the pro-apoptotic Bax, whereas p21/sup WAF1/CIPl/ was enhanced in a dose- and time-dependent fashion; this effect was partially inhibited by N-acetylcysteine. The increase in p21/sup WAF1/CIPl/ was accompanied by a parallel accumulation of cells in the G1 phase of the cycle. These results suggest that the p53-independent induction of p21/sup WAF1/CIP/ and the induction of apoptosis may mediate the anti proliferative effect of WEUPC at least in this study; on the basis of this observation, WEUPC could be proposed as an useful adjunct to the treatment of p53-deficient tumors, which are often refractory to standard chemotherapy.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.11
• /
• pp.18-26
• /
• 2011

This paper describes a multi-mode LDPC decoder which supports three block lengths(648, 1296, 1944) and four code rates(1/2, 2/3, 3/4, 5/6) of IEEE 802.11n wireless LAN standard. To minimize hardware complexity, it adopts a block-serial (partially parallel) architecture based on the layered decoding scheme. A novel memory reduction technique devised using the min-sum decoding algorithm reduces the size of check-node memory by 47% as compared to conventional method. From fixed-point modeling and Matlab simulations for various bit-widths, decoding performance and optimal hardware parameters such as fixed-point bit-width are analyzed. The designed LDPC decoder is verified by FPGA implementation, and synthesized with a 0.18-${\mu}m$ CMOS cell library. It has 219,100 gates and 45,036 bits RAM, and the estimated throughput is about 164~212 Mbps at 50 MHz@2.5v.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.4
• /
• pp.407-417
• /
• 2001

To secure good visibility various steel flexible barriers were introduced and constructed in the area where a highway runs in parallel with a railroad. However, none of the flexible barriers was proven to satisfy the performance criteria for the impact condition of $14tonf-80km/h-15^{\circ}$ set forth by Korea design guide. Thus, in this study, the impact performance of the flexible barriers was investigated by using Barrier VII program, which was most widely used for the preliminary design of barriers. From the analytical results, it has been found that none of the barriers satisfied the stiffness requirement while the Type C barrier showed stiffer behavior than the others. Thus, the way to strengthen the installed Type C barrier was experimentally investigated. The method of partially filling concreter inside the pst was efficient to satisfy the performance criteria for the impact condition of $14tonf-80km/h-15^{\circ}$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.363-371
• /
• 2013

This paper describes a multi-standard LDPC decoder which supports 19 block lengths(576~2304) and 6 code rates(1/2, 2/3A, 2/3B, 3/4A, 3/4B, 5/6) of IEEE 802.16e mobile WiMAX standard and 3 block lengths(648, 1296, 1944) and 4 code rates(1/2, 2/3, 3/4, 5/6) of IEEE 802.11n WLAN standard. To minimize hardware complexity, it adopts a block-serial (partially parallel) architecture based on the layered decoding scheme. A DFU(decoding function unit) based on sign-magnitude arithmetic is used for hardware reduction. The designed LDPC decoder is verified by FPGA implementation, and synthesized with a 0.13-${\mu}m$ CMOS cell library. It has 312,000 gates and 70,000 bits RAM. The estimated throughput is about 79~210 Mbps at 100 MHz@1.8v.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.6
• /
• pp.738-743
• /
• 2000

Objectives : The less invasive stereotactic surgery of hypertensive intracerebral hematoma has been preferred. Many techniques were developed to facilitate aspiration of a dense blood clot in acute stage. Authors describe a method for evacuation of putaminal hematoma via computerized tomography(CT)-aided free-hand stereotactic infusion of urokinase and frequent negative pressure aspiration. Patients and Methods : A total of ten patients with spontaneous putaminal hematoma underwent surgery with negative pressure aspiration in the three-year period. All procedures were performed within 12 hours of insult. A silicone ventricular catheter was inserted into the center of hematoma through a burr hole at the Kocher's point under local anesthesia. In a typical case of putaminal hematoma, the trajectory of catheter was pointed the center of hematoma parallel to sagittal plane vertically and the external auditory meatus posteriorly. Immediately after the first trial of hematoma aspiration low-dose urokinase solution(2,000IU/5ml saline) was administrated through the catheter and drain was clipped for 30 minutes. Subsequently, the partially liquified hematoma was manually aspirated using a 10ml syringe with a negative pressure of less than 2 to 3ml. The procedure was carefully repeated every 1 hour until the hematoma was near totally evacuated. Results : The patients population consisted composed of 4 men and 6 women with a mean age of 61.6 years. All had major neurological deficits preoperatively. The mean hematoma volume was 44.3 ml and hematoma was drained for 20 to 48 hours. No complications such as rebleeding, meningitis, or malplaced catheter were noted. Outcome was moderately disabled in four patients and good recovery in three patients. Conclusion : Although the frequent negative pressure aspiration and low-dose urokinase infusion has the disadvantage of possbility of rebleeding and infection, it is consisdered to be an effective method because it allows a simple, safe, and complete removal of hematoma.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.3 no.4 s.11
• /
• pp.145-151
• /
• 2003

The domestic and the industry wastes which mainly come out of human life activities have been usually processed mainly by the incineration method and/or the method of reclamation. The method of reclamation, specially open dumping, has caused significant environmental pollution problems on the local or regional soil and groundwater system by leachate. Therefore, to investigate the 3-D structure characteristics of environmental pollution area is one of the hot subjects. We applied dipole-dipole method of electrical resistivity survey to investigate 3-D environmental contamination characteristics of the Noeun landfill area. For electrical resistivity survey, the line for measurements was established parallel to the main boundary of the Noeun landfill, for effective investigation of the whole landfill area. The result shows that the uppermost layer of the Noeun landfill is believed to be stabilized completely, based on the result of electrical resistivity values. However, the lowest layer of the Noeun landfill was partially polluted by leachate. Therefore, the electrical resistivity survey method is believed to be the one of the most effective methods to investigate three-dimensional distribution of leachate occurred in the lower part of landfill area.