• Proceedings of the KIPE Conference
• /
• 1996.06a
• /
• pp.117-120
• /
• 1996

Power conversion system must be increased switching frequency in order to achieve a small size, a light weight and a low noise. However, the switches of converter are subjected to high switching power losses and switching stresses. As a result of those, the power system brings on a low efficiency. In this paper, the authors propose a DC-DC boost converter of high power by partial resonant switch method (PRSM). The switching devices in a proposed circuit are operated with soft switching and the control technique of those is simplified for switch to drive in constant duty cycle. The partial resonant circuit makes use of a inductor using step up and a condenser of loss-less snubber. Also the circuit has a merit which is taken to increase of efficiency, as it makes to a regeneration at input source of accumulated energy in snubber condenser without loss of snubber in conventional circuit. The result is that the switching loss is very low and the efficiency of system is high. The proposed converter is deemed the most suitable for high power applications where the power switching devices are used.

• International Journal of Concrete Structures and Materials
• /
• v.8 no.1
• /
• pp.15-26
• /
• 2014

In order to study the capacities of a new occurrence of Brazilian clay samples as partial replacements of cement, a bentonite sample was selected for utilization in the natural and modified forms for present study. The natural bentonite (BBT) was modified by anchorament of 3-aminopropyltrietoxisilane ($BBT_{APS}$) and 3,2-aminoethylaminopropyltrimetoxisilane (BBTAEAPS) in the surface of component minerals of bentonite sample. The original and organo-bentonite samples were characterized by elemental analysis, scanning electron microscopic and textural analyses. The values of micropore area were varying from $7.2m^2g^{-1}$ for the BBT to $12.3m^2g^{-1}$ for the $BBT_{AEAPS}$. The bentonite samples were characterized by the main variable proportion of bentonite in the natural and intercalated forms (2, 5, 10, 15, 20, 25, 30, and 35 % by weight of cement) in the replacement mode whiles the amount of cementations material. The workability, density of fresh concrete, and absorption of water decreased as the substitution of ordinary Portland cement by perceptual of natural and modified bentonite increased. The results reveal that workability decreased with decrease of the amount of natural bentonite in the concrete, same behavior is observed for bentonite functionalized, varying from 49 to 28 mm. The energetic influence of the interaction of calcium nitrate in the structure of blends was determined through the calorimetric titration procedure.

• Geomechanics and Engineering
• /
• v.12 no.4
• /
• pp.639-655
• /
• 2017

The binary mixture consists of two types of granular media with different physical attributes and sizes, which can be characterized by the percentage of large granules by weight (P) and the particle size ratio (${\alpha}$). Researchers determine that two thresholds ($P_S$ and $P_L$) exist for the peak shear strength of binary mixtures, i.e., at $P{\leq}P_S$, the peak shear strength is controlled by the small granules; at $P{\leq}P_L$, the peak shear strength is controlled by the large granules; at $P_S{\leq}P{\leq}P_L$, the peak shear strength is governed by both the large and small granules. However, the thresholds of binary mixtures with different ${\alpha}$ values, and the explanation related to the inner details of binary mixtures to account for why these thresholds exist, require further confirmation. This paper considers the mechanical behavior of binary mixtures with DEM analysis. The thresholds of binary mixtures are found to be strongly related to their coordination numbers $Z_L$ for all values of ${\alpha}$, where $Z_L$ denotes the partial coordination number only between the large particles. The arrangement structure of the large particles is examined when P approaches the thresholds, and a similar arrangement structure of large particles is formed in both 2D and 3D particle systems.

• Archives of Reconstructive Microsurgery
• /
• v.23 no.1
• /
• pp.13-17
• /
• 2014

Purpose: Soft tissue defect on foot and ankle is vulnerable and requires a thin flap for improvement of aesthetic and functional results. Lateral supramalleolar flap is a simple and fast procedure, which can preserve and supply reliable constant blood flow, and causes fewer donor site complications. The authors reviewed our cases and report the clinical results. Materials and Methods: Ten cases of soft tissue defects on the lower leg, around the ankle were treated with lateral supramalleolar flap. There were seven males and three females with a mean age of 54.8 years. The mean size of flaps was $5.9{\times}6.3$ cm and the mean follow-up period was 23 months. Flap survival and postoperative complications were evaluated. Results: Nine flaps survived completely without loss of flap. There was one case of partial wound dehiscence requiring debridement and repair, and another case of necrotic flap change requiring partial bone resection and closure. All patients were capable of weight bearing ambulation at the last follow up. Conclusion: The authors suggest that the lateral supramalleolar flap could be a useful option for treatment of soft tissue defect around the ankle joint.

• Korean Journal of Veterinary Service
• /
• v.18 no.1
• /
• pp.22-32
• /
• 1995

A partial characteristics and pathogenicity of Aeromonas salmonicida strain isolated from diseased cultured eel were studied. On the biochemicial characteristics of the isolate strain was classified into atypical Aeromonas salmonicida : the characteristics of the isolate strain differed from those of the subspecies of Achromogenes, masoucida and salmonicida. It strain was named atypical Aeromonas salmonicida EL-1 and it grew at optimal pH 7.5 and l% Nacl. In the pathogenicity test, at one to two days post infection, the motality of artificially infected eels with $1{\times}10^8$ and $1.0{\times}10^7$ cfu/fish group was 100%, and at three days pos-infection, in the $1.0{\times}10^6$ /cfu /fish infected group, the epizootic haemorrhagic ulcer was developed, and haemorragic red sports were formed around abdomen and fins and its died (40%). Total cell protein peptide bands of the A. salmonicida EL-1 were presented betweeon 11.8~102 Kd in molecular weight by the electrophoretic analysis and appeared 28 bands in all. Drug sensitivity of atypical A. salmonicida EL-1 strain was sensitivity to chlorampenicol, gentamicin, kanamycin, streptomycin and sulfamethoxazole /trimethoprim and intermidiate to ampiclin and neomycin resistant to cephalotin, erythromycin, lincomycin and tetracycline.

• Korean Journal of Veterinary Research
• /
• v.34 no.4
• /
• pp.653-664
• /
• 1994

This study was carried out to investigate diabetic renal changes in cyclophosphamide(CY) treated nonobese diabetic(NOD) mice and to develop animal model of diabetic human nephropathy. The 8-week-old NOD and ICR mice were injected with cyclophosphamide intraperitoneally at 200mg/kg body weight and compared the chemical effects on these mice with the non-treated NOD and ICR mice respectively. The renal glomeruli in ICR, cyclophosphamide-treated ICR(ICR+CY), NOD and cyclophosphamide-treated NOD(NOD+CY) mice were observed by the light and electron microscopes. The results obtained were summarized as follows ; 1. Spontaneous incidences of diabetes mellitus in NOD mice were significantly promoted by dosing with cyclophosphamide. 2. Glomerulohypertrophy, proliferation of mesangium, partial thickening of glomerular basement membrane, and partial fusion of pedicels of podocyte were observed in NOD mice and NOD+CY mice. These changes were not observed in both ICR mice and ICR+CY mice. 3. The diabetic nephropathy observed in NOD+CY mice was more severe than that of non-treated NOD mice.

• Advances in pediatric surgery
• /
• v.20 no.2
• /
• pp.65-68
• /
• 2014

Congenital duodenal obstruction is a one of the emergent surgical conditions in neonates. Almost of them were diagnosed with double-bubble sign in prenatal ultrasonography. However, partial obstruction caused from duodenal web could be overlooked. We reported a duodenal web in early childhood. A three-year-old girl visited at our pediatric clinic for constipation. She had been showed non-bilious vomiting after weaning meal since 6 months old of her age, but her weight was relevant for 50-75 percentile of growth curve. Barium enema was initially checked, but any abnormal finding was not found. We noticed the severely distended stomach and 1st portion of duodenum. Upper gastrointestinal series revealed partial obstruction in 2nd portion of duodenum. After laparotomy, we found the transitional zone of duodenum and identified a duodenal web via duodenotomy. We performed duodeno-duodenostomy without any injury of ampulla of Vater. She was recovered uneventfully. During 6 months after operation, she does well without any gastrointestinal symptoms or signs, such as vomiting or constipation.

• Journal of the Korean Ceramic Society
• /
• v.43 no.12 s.295
• /
• pp.805-811
• /
• 2006

The microstructural changes in Ni/YSZ anode substrate and crack formation during Ni oxidation were investigated. The composition of as-sintered anodes was 56 wt% NiO+44 wt% YSZ and that of electrolyte was 8 mol% yttria. After complete reduction, specimens were oxidized in $N_2$ + air at $600\sim800^{\circ}C$. Oxygen partial pressure was controlled in between 0.05 atm and 0.2 atm $O_2$. When the anode was oxidized, at higher than $690^{\circ}C$, three layers were formed in the specimens. The first was fully oxidized layer(NiO/YSZ), the second was a mixed layer and the third, near-intact layer. Under $640^{\circ}C$ such distinctive layers were not observed. Cracks formed at electrolyte layer when weight gain attained at $65\sim75%$ of the total gain due to complete oxidation despite of different oxidation temperature and oxygen partial pressure.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1997.10a
• /
• pp.88-92
• /
• 1997

Power conversion system must be increased swiching frequency in order to achieve a small size, a light weight and a low noise, However, the swiches of converter are subjected to high switching power losses and switching stresses. As a result of those, the power system brings on a low efficiency. In this paper, the authors propose a DC-DC boost converter of high power by partial resonant switch method (PRSM). The switching devices in a proposed circuit are operated with soft swiching and the control technique of those is simplified for switch to drive in constant duty cycle. The partial resonant circuit makes use of a inductor suing step up and a condenser of loss-less snubber. Also the circuit has a merit which is taken to increase of efficiency, as if makes to a regeneration at input source of accumulated energy in snubber condenser without loss of snubber in conventional cirvuit. The result is the the switching loss is very low and the efficiency of system is high. The proposed converter is deemed the most suitable for high power applications where the power switching devices are used.

• Advances in concrete construction
• /
• v.13 no.3
• /
• pp.233-242
• /
• 2022

An attempt is made to develop an eco-friendly concrete with ground granulated blast furnace slag (GGBS) and pond ash as partial replacement materials for cement and fine aggregate, respectively without compromising the strength and durability. Sixteen concrete mixes were developed by replacing cement and fine aggregate by GGBS and pond ash, respectively in stages of 10%. The maximum replacement levels of cement and fine aggregates were 50% and 30% respectively. Experimental results revealed that the optimum percentage of GGBS and pond ash replacement levels were 30% and 20% respectively. The optimized mix was used further to study the flexural behavior and durability properties. Reinforced Concrete (RC) beams were cast and tested under a four-point bending configuration. Also, the specimens prepared from the optimized mix were subjected to alternate wet and dry cycles of acid (3.5% HCl and H₂SO₄) and sulphate (10% MgSO₄) solutions. Results show that the optimized concrete mix with GGBS and pond ash had a negligible weight loss and strength reduction.