References
- G. H. Kim and H. S. Song, 'Development Status of SOFC,' Ceramist, 3 [5] 7-16 (2000)
- DOE/NETL, Fuel Cell Handbook (Sixth Edition), pp. 186- 97, EG&G Technical Services, Inc., Science Applications International Corporation, 2002
- N. Q. Minh and T. Takahashi, Science and Technology of Ceramic Fuel Cells, pp. 148-49, Elsevier Science B. V. Amsterdam, Netherlands, 1995
- W. Z. Zhu and S. C. Deevi, 'A Review on the Status of Anode Materials for Solid Oxide Fuel Cells,' Mater. Sci. and Eng., A362 228-39 (2003)
- J.-H., Choi, 'Effect of Reduction/Oxidation of Ni and Thermal Cycling on Ni/YSZ Anode in SOFC,' pp. 28-38, M. S. Thesis, Kyungpook National University, Daegu, 2004
- D. Waldbillig, A. Wood, and D. Ivey, 'Thermal Analysis of the Cyclic Reduction and Oxidation Behavior of SOFC Anodes,' Solid State Ionics, 176 847-59 (2005) https://doi.org/10.1016/j.ssi.2004.12.002
- S.-D. Kim, H. Moon, S.-H. Hyun, J.-H. Moon, J.-S. Kim, and H.-W. Lee, 'Performance and Durability of Ni-Coated YSZ Anodes for Intermediate Temperature Solid Oxide Fuel Cells,' Solid State Ionics, 177 931-38 (2006) https://doi.org/10.1016/j.ssi.2006.02.007
- A. Morales-Rodriguez, A. Bravo-Leon, G. Richter, M. Ruhle, A. Dominiguez-Rodriguez, and M. Jimenez-Melendo, 'Influence of Oxidation on the High-Temperature Mechanical Properties of Zirconia/Nickel Cerments,' Scripta Mater., 54 2087- 90 (2006) https://doi.org/10.1016/j.scriptamat.2006.03.005
- D.-S. Lee, J.-H. Lee, J. Kim, H.-W. Lee, and H. S. Song, 'Tuning of the Microstructure and Electrical Properties of SOFC Anode via Compaction Pressure Control during Forming,' Solid State Ionics, 166 13-7 (2004) https://doi.org/10.1016/j.ssi.2003.10.003
Cited by
- Evaluation of the Effect of High Temperature on the Interface Characteristics between Solid Oxide Fuel Cell and Ag Paste vol.30, pp.1, 2015, https://doi.org/10.14346/JKOSOS.2015.30.1.021