• 한국통신학회논문지
• /
• 제15권7호
• /
• pp.553-564
• /
• 1990

선계2계 편미분 방정식의 일반식에 대한 계수 메트릭스를 (n-1)x(n-1) submatrices로 나누어서 block tridiagonal system으로 변환한 후 cyclic odd-even reduction 기법을 응용하여 large-grain data granularity로서 미지벡타를 구하는 block cyclic reduction 알고리즘을 작성했다. 그런데 이 block cyclic reduction 기법은 매 연산의 단계마다 병렬성이 변하여 병렬처리형 컴퓨터에는 적합하지 못하므로 이 기법을 변형해서 병렬성이 일정하며 실행시간이 보다 단축되는 block cyclic reduction 기법을 제안하고 이 기법에 의한 선형2계 편미분 방정식의 일반식의 解를 구하는 알고리즘을 작성하여 기존의 기법과 비교 고찰했다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권4호
• /
• pp.412-422
• /
• 2012

Air lubrication techniques for frictional drag reduction on ships have been proposed by numerous researchers since the 19th century. However, these techniques have not been widely adopted as questions persist about their drag reduction performance beyond the laboratory, as well as energy and economic cost-benefit. This paper draws on data from the literature to consider the suitability of air lubrication for large ocean going and U.S. Great Lakes ships, by establishing the basic energy economic calculations and presenting results for a hypothetical air lubricated ship. All the assumptions made in the course of the analysis are clearly stated so that they can be refined when considering application of air lubrication to a specific ship. The analysis suggests that, if successfully implemented, both air layer and partial cavity drag reduction could lead to net energy savings of 10 to 20%, with corresponding reductions in emissions.

• 한국기후변화학회지
• /
• 제7권3호
• /
• pp.231-236
• /
• 2016

Electrocatalytic reduction can produce useful chemicals and fuels such as carbon monoxide, methane, formate, aldehydes, and alcohols using carbon dioxide, the green house gas, as a reactant through the supply of electrical energy. In this study, tin-lead (Sn-Pb) alloy electrodes are fabricated by electrodeposition on a carbon paper with different alloy composition and used as cathode for electrocatalytic reduction of carbon dioxide into formate in an aqueous system. The prepared electrodes are measured by Faradaic efficiency and partial current density for formate production. Electrocatalytic reduction experiments are carried out at -1.8 V (vs. Ag/AgCl) using H-type cell under ambient temperature and pressure and the gas and liquid products are analyzed by gas chromatograph and liquid chromatograph, respectively. As results, the Sn-Pb electrodes show higher Faradaic efficiency and partial current density than the single metal electrode. The Sn-Pb alloy electrode which have Sn:Pb molar ratio=2:1, shows the highest Faradaic efficiency of 88.7%.

• 대한기계학회논문집A
• /
• 제21권7호
• /
• pp.1127-1140
• /
• 1997

With the study for identifying the transmission characteristics of vibration and noise generated by operating engine system of a vehicle, recently many engineers have studied actively the reduction of vibration and noise inducing uncomfortableness to the passenger. In this study, output noise was analyzed by multi-dimensional spectral analysis and vector synthesis method. The multi-dimensional analysis method is very effective in case of identification of primary source, but this method has little effect on suggestion for interior noised reduction. For compensation of this, vector synthesis method was used to obtain effective method for interior noise reduction, after identifying primary source for output noise. In this paper, partial coherence function of each input was calculated to know which input was most coherent to output noise, then with simulation of changes for input magnitude and phase by vector synthesis diagram, the trends of synthesized output vector was obtained. As a result, the change of synthesized output vector could be estimated.

• 대한전자공학회논문지SD
• /
• 제48권3호
• /
• pp.42-47
• /
• 2011

제곱기의 부분곱 행렬은 대칭이므로 부분곱을 폴딩(folding), 쉬프트, 재배열하여 부분곱 행렬의 높이를 줄일 수 있다. 본 논문에서는 기존 제곱기와 비교하여 효율적인 제곱기의 설계 방법을 제안한다. 또한, 제안한 제곱기에 대해 고정길이 제곱기의 설계 방법을 제안한다. 시뮬레이션을 통해 제안한 제곱기는 기존 제곱기와 비교하여 면적은 약 17%, 지연시간(propagated delay time)은 약 10%, 전력소모는 약 10%까지 감소시킬 수 있음을 보인다. 제안한 고정길이 제곱기는 기존 고정길이 제곱기와 비교하여 절대오차와 평균오차의 성능비교에서 우수하면서, 일반 제곱기(full-width)와 비교하여 면적, 지연시간, 전력소모를 각각 30%, 16%, 28%까지 감소시킬 수 있음을 보인다.

• Bulletin of the Korean Chemical Society
• /
• 제31권2호
• /
• pp.473-474
• /
• 2010

• Bulletin of the Korean Chemical Society
• /
• 제35권7호
• /
• pp.2169-2171
• /
• 2014

• Bulletin of the Korean Chemical Society
• /
• 제29권11호
• /
• pp.2303-2304
• /
• 2008

• 한국통신학회논문지
• /
• 제25권10A호
• /
• pp.1548-1553
• /
• 2000

In this paper, an effective peak power reduction scheme for a downlink OFDM-CDMA system is proposed. Using the partial parallel transform(PPT) structure, peak-to-average power ratio(PAPR) can be reduced. The patterns of inputs of Inverse Fast Fourier Transform(IFFT) are more randomized in this structure by allotting the subcarriers to each users. At the cost of complexity we can obtain reduced PAPR and multiple access interference(MA) Computer simulations are carried out from the viewpoint of PAPR and demonstrated the improved PAPR performance.

• Bulletin of the Korean Chemical Society
• /
• 제8권4호
• /
• pp.301-304
• /
• 1987

A systematic study of the partial reduction of nitriles to the corresponding aldehydes with thexylbromoborane-methyl sulfide $(ThxBHBr{\cdot}SMe_2)$ under practical conditions has been carried out. The yields of aldehydes are good in the aliphatic series. However, the yields of aromatic series vary with substituents and ring itself.