• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.12
• /
• pp.33-37
• /
• 2002

A short shot is a molded part that is incomplete because insufficient material was injected into the mold. Remedial actions to control the process conditions can be taken by the injection molding experts based on their knowledge and experience. However, it is very difficult for the non-experts to avoid short shot by finding the proper process conditions such as mold temperature, melt temperature and filling time. In this paper, an intelligent generator of the optimal process conditions based upon fuzzy logic algorithm is proposed so that trial and error can be minimized and the non-experts as well as the experts can also find the optimal process conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.402-405
• /
• 2001

A short shot is a molded part that is incomplete because insufficient material was injected into the mold. Remedial actions to control the process conditions can be taken by the injection molding experts based on their knowledge and experience. However, it is very difficult for the non-experts to avoid short shot by finding the proper process conditions such as mold temperature, melt temperature and filling time. In this paper, an intelligent generator of the optimal process conditions based upon fuzzy logic algorithm is proposed so that trial and error can be minimized and the non-experts as well as the experts can also find the optimal process conditions.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.8
• /
• pp.25-32
• /
• 2017

In this paper we propose a resource management method which enables to guarantee the quality of experience (QoE) for handover in the overlaid macro-femtocell networks. How to cope with the resource demand of handover calls is necessary to efficiently support the movement of mobile terminals, the QoE degradation or the load control. We attempt to satisfy the QoE requirements of users and maximize the capacity of the system at the same time. In order to achieve this goal, this scheme divides the shared resources into two part for the movement of MT and QoE degradation, and allocates those resources with the competition between four types of handovers. Simulation results show that our scheme provides better performances than the conventional one with respect to the outage probability, data transmission throughput.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.03a
• /
• pp.126-129
• /
• 1998

Proper design of blocker dies is one of the most important aspect of impression and closed-die forging to achieve adequate metal distribution. Determination of the blocker configuration is a very difficult task and is art in itself, requiring skills achieved only by years of extensive experience. To save the cost and time of blocker design, many methods using computer were proposed. In this research, low pass filter method proposed by Oh etc. was applied to blocker die design of spoiler support, part of aircraft and plasticine model experiment of closed die forging of spoiler support was accomplished to verify the validity of the blocker designed.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.239-242
• /
• 2002

This paper has been realized PCB insert machine automation system. For the reduction of the install programming time as well as possible, a new technique is addressed. In detail, an image frame is initially divided into one area whose size decreases according to the distance from hole to hole on PCB. Searching center of hole using a threshold method after median filtering. At every moment of mouse click, area is shifted to locate the hole, and detect a center of hole in a new area. Experimental results are demonstrated to verify the superiority of this scheme in detecting position of part by comparing with a man of experience.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05b
• /
• pp.132-135
• /
• 2003

The use of the midnight power faces the crisis of the load peak-cut problem. Which appears at the simultaneous start of the midnight power system. We suggest a control method which uses the characteristics of boiler system. The system used that method consists of 6 heaters and are designed for the load distribution on each heater. Proposed method can take the balance of load during full time of midnight power supplied. The system is composed of measurement part and heater controller. Taking the data of the experience as a reason, the algorithm make the midnight power distribute. Experimental results show the validity of the method and the system proposed.

• Geomechanics and Engineering
• /
• v.9 no.1
• /
• pp.83-100
• /
• 2015

Water and energy supplies are the key factors affecting the economic development and environmental improvement of Turkey. Given their important role and the fact that a large part of Turkey is in seismically active zones dams should be accurately analyzed since failure could have a serious impact on the local population environment and on a wider level could affect the economy. In this paper, a procedure is proposed for the static, slope stability, seepage and dynamic analysis of an earth dam and the Pamukcay embankment dam. The acceleration time history and maximum horizontal peak ground accelerations of the $Bing\ddot{o}l$ (2003) earthquake data was used based on Maximum Design Earthquake (MDE) data. Numerical analysis showed that, the Pamukcay dam is likely to experience moderate deformations during the design earthquake but will remain stable after the earthquake is applied. The result also indicated that, non-linear analysis capable of capturing dominant non-linear mechanism can be used to assess the stability of embankment dams.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.9 no.5
• /
• pp.496-508
• /
• 1999

Fuzzy System which are based on membership functions and rules can control nonlinear uncertain complex systems well. However Fuzzy logic controller(FLC) has problems; It is difficult to design the stable FLC and FLC depends mainly on individual experience. Although FLC can be designed using the error back-propagation algorithm it takes long time to converge into global optimal parameters. Well-developed linear system theory should not be replaced by FLC but instead it should be suitably used with FLC. A new methodology is introduced for designing THEN-PART membership functions of FLC based on its well-tuned state feedback controller. A example of inverted pendulum is given for demonstration of the robustness of proposed methodology.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.114-115
• /
• 2013

The maintenance and repair period consists the largest part of a construction project life cycle cost. However, it has been analyzed that the repairing plan relies on regulations and the officers' experience mostly that sometimes lead to performing unnecessary work. Moreover, the data occurred during repairing have not been stored in a system that can be used in future plans. Therefore, the purpose of this study is to suggest a repairing cost and time predicting model by applying the properties of the building.

• Journal of Family Resource Management and Policy Review
• /
• v.23 no.1
• /
• pp.115-128
• /
• 2019

The purpose of this study was to explore factors influencing on work values of female college students focusing on parental effect to enhance their participation in labor market. The respondents were asked to answer a questionnaire, and the collected 400 data were analyzed using SPSS 23.0. The results showed that the students and their parents had more leisure-oriented and extrinsic work values than labor-oriented and intrinsic work values. The labor-oriented and intrinsic work values appeared to be high in the group with experience of part time jobs, with high educated father or with middle household income. The influencing factors on college students' work values were parental work values, gender consciousness, self-efficacy and major. The results from this study suggest that parents of college students should be educated to change their work values.