• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1730-1733
• /
• 1991

In this paper, we two dimensional processing method is presented, which can accurately determine the orientation of an part. Matching bewteen the object and the object contour is decomposed to estimate the orientation of the object and to evaluate the similarity new approach is very robust with respect to noise and no preprocessing of the contour is required. Also, this method has many advantages over the converntional correlation technique. With only a few uniformly sampled points, this method can estimate the accurate orientation in an efficient manner even in a noisy environment.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.2
• /
• pp.104-113
• /
• 1993

Characteristics of fiber-reinforced thermoplastic sheet depend on the quantity and shape of fibers. During a molding process of composites, the fiber-maxtrix separation and fober orientation are caused by the flow during the molding process. As a result, the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation-orientation and molding conditions. The correlation between the separation and the orientation have to be clarified for designing the fiber structure. In this paper, the degree of nonhomogeneity which is a measure of the separation is obtained using one-dimensional rectangular shaped part compression molding. And the orientation function is defined and measured by the image processing using soft X-rayed photograph and image scammer. Correlation between the degree of nonhomogeneity and the orientation function is discussed.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.123-132
• /
• 1995

During compression molding of fiber-reinforced polymeric composites, microstructural changes such as the fiber-matrix separation and the fiber orientation are occurred by the flow of composite materials. Since the nonhomogeneity and anisotropy of composites are caused by the separation and orientation of fibers. On the other hand, the separation and the orientation of fibers are inseparably related to each other. In this paper the degree of nonhomogeneity which is a measure of the separation is obtained using one-dimensional rectangular shaped part compression molding. And the orientation function is measured by the image processing using soft X-rayed photograph and image scanner. We study effects of the mold temperature on the degree of nonhomogeneity and the orientation function.

• Journal of Information Technology Applications and Management
• /
• v.18 no.2
• /
• pp.109-134
• /
• 2011

This dissertatioionstudied the relation between orientation of learning, marketing, entrepreneurs and organizational culture and organizational performance. This study tried to look out the factors that the peoples of an organization takes part in the organizational culture to be related to the cultural efficiency and organizational performance. Accordingly result of this study, orientation of learning, marketing, entrepreneurs is related to organizational culture and organizational performance. Customer orieatation of marketing orientation showed a positive effect for organizational non-finantial performance according to mission consciousness of organizational culture.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.3
• /
• pp.34-43
• /
• 1996

In this study basic equations of fiber orientations is cimpared with experimental results. It is found that fiber orientations of short fiber reinforced polymeric composite under compression molding are governed by slope of flow speed in x-y direction. Fiber orientation angle of mold is also found to increase with closure speed and the compression ratio. At the middle of the mold, the slope of flow speed is larger in x-direction than in y-direction. At the wall of the mold, the shope of flow speed in y-direction occurs due to the effect of friction, hence affects the fiber orientation. The effect of partial flow, which incurs y-direction orientation causes to increase the fiber orientation angle at the fore part of the flow.

• Journal of architectural history
• /
• v.13 no.2 s.38
• /
• pp.71-81
• /
• 2004

This paper discusses of the problem of direction and orientation of site design of a traditional Korean village. The research focus on how the directional orientation of each houses adapt the direction of the flow of surrounding mountains. The direction of mountains worked as a prime rule which most of the houses( 76.6%) observed the same direction as their own orientation. While the central part of the village followed the direction of mountains more strictly, however the houses on the periphery area tend to be more free from the direction of mountains. This houses of the periphery respect either the direction of the mountain flow right behind the house or faces toward the south.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.3
• /
• pp.80-90
• /
• 1994

In this paper, a high-resolution algorithm for detecting the orientation and position of the SMD and an algorithm for compensating the position and skew angle of the PCB are proposed. The proposed algorithm for the first topic consists of two parts. Its first part is a preprocessing step. in which corner points of the SMD are detected and they are grouped. Then the coarse angle of the principal axis is obtained by line fitting. The second part is a main processing step, in which the fuzzy Hough transform over the limited range of angles is applied to the corner points to detect precisely the orientation of the SMD. The position of the SMD is determined by using its four corner points. The proposed algorithm for the second topic is the one which detects a rotation angle and translation parameters of the PCB using a template matching method. The computer simulation shows that the parametes obtained by proposed algorithms are more precise than those by the several conventional methods considered. The proposed algorithms can be applied to the fast and accurate automatic inspection systems.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1349-1350
• /
• 2006

FRP has been used much for core materials of insulator. FRP consists of fiber and plastics(resin and binder). The fiber contributes strength to FRP. The fiber orientation in FRP has a great effect on the strength of FRP because the strength of FRP mainly depends on the strength of fiber. The direction of applied stress of FRP is different from the kinds of insulators. In this study, inner part of FRP rod was made unidirectionally by pultrusion method and outer part of FRP rod was made by filament winding method. Compressive strength and stress of FRP rods were simulated according to the winding orientation of glass fiber. Simulated value and real evaluated compressive strength were compared each other.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.199-204
• /
• 1994

A method for determining the collision-free tool orientation for 5-axis milling is presented. In 5-axis milling, the proper tool orientation as well as the optimal CC-data has to be selected to machine the workpiece efficiently and accurately and accurately. Essentially, the tool orientation should be determined to avoid collisions between the tool and workpiece and to enable efficient machining. In this work, the tool orientation is determined at every CC-point which is assumed to be given. The procedure uses the potential energy method that assumes the tool and the part surfaces are charged with static electricity. This approach can detect can deteat both global and local collisions (gouging) irrespective of the tool shape. Further, in order to increase the machining efficiency, the material removal rate is maximized simultaneously.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.5
• /
• pp.382-390
• /
• 2008

Five-axis machining has been applied to manufacture of turbine blades, impellers, marine propellers. Nowadays it extends to mold & die machining, where more productivity as well as added value is expected. The five-axis machining can be divided into positional and continuous, according to the variableness of tool orientation during material removal process. The positional five-axis machining is commonly applied to the regional machining on a whole part surface in mold manufacturing industry, where the tool orientation for each region (area) should be determined to be feasible, that is, avoiding any interference such as machine tool collision, etc. Therefore it is required for a CAM programmer to decide a feasible tool orientation in generating tool-paths on a designated area, because it is a very tedious job to obtain such information by utilizing a commercial CAM system. The developed system generates feasibility data on tool orientation and machining region, which facilitates the CAM programmer's decision on a feasible tool orientation.