• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.510-518
• /
• 2008

This paper presents recent development of (semi)-active steering bogies for railway vehicles and introduce the state-of-art of related technologies. Steering bogies have been studied in various researchers since they can offer high ride quality for passengers and reduce the maintenance costs of wheel and rail wear. Especially, they are considered to be a fundamental solution to dramatically reduce the squeal noise on tight curves. However, passive steering bogies such as self-steering bogies and forced steering bogies have shown their limits to cope with the various running conditions. Therefore, (Semi)-active steering bogies have been studied to overcome the drawbacks of the passive steering bogies. As a result, an active steering bogie, so called mechatronic bogie, is developed successfully in Europe and it has shown remarkable performance in test line.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.244-250
• /
• 2007

The electric train in the first line subway runs faster in the block from Suwon to Cheonan than the general block. The faster run results in the deterioration of ride quality due to the increase of noise and vibration. To reduce the noise and vibration of the electric train, a running test of the electric train was performed in the block from Suwon to Cheonan. The experimental results show that the sources of the noise and vibration basically comes from the irregularity of the railroad track and the connection part between car body and bogie. The possible countermeasure of the high speed electric train can be the reinforcement of the center pivot to have more flexibility and the frequent maintenance of electric train.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.138-143
• /
• 2000

This paper addresses experimental results carried out to investigate the transmission of seat vibration to the head for Korean. Vertical seat vibration in the frequency range of 0.5-30 Hz was applied to a seated Korean male subject. To examine the intra-variable effects on transmissibility, five different postures and three different vibration excitation levels were considered. The applied acceleration and head accelerations of the seated subject were measured simultaneously by using a 6-axes bite-bar. Detailed experimental results of measured transmissibilities are illustrated for each posture and/or vibration excitation level. They are found to allow the identification of dynamic characteristics of Korean seated body for various real vibration environments. Furthermore, they are expected to be very useful in designing new seats for automotive and railway vehicles and in improving their vibration ride quality.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.722-728
• /
• 2012

In railway vehicle, riding comfort depends mainly on the secondary lateral damper and track condition. When the damping force of lateral damper becomes abnormal condition or the track condition is worse, the running stability and ride comfort of the railway vehicles go down. In addition, the lateral motion of carbody is increased. Therefore, the lateral motion of carbody is reviewed carefully by considering lateral damping force and track condition of the railway line in design stage. In this study, the lateral displacement of carbody was studied in accordance with lateral damping force and track condition. The target vehicle is EMU for subway line.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2236-2241
• /
• 2008

To predict the dynamic behaviour of railway vehicle, the complex vehicle structure has been described by mathmatical model such as mass, spring and damper. Air-spring has played a major role to improve dynamic characteristics, vibration isolation and ride comfort. The mechanical behaviour of air spring is very complicated. The behaviour is based on fluid and thermodynamic mechanisms. The main parameters of air spring are stiffness due to compression of the air in the spring and surge reservoir, change of area stiffness and orifice damping. In this paper, we have studied an air-spring modeling method and compared the difference between calculation and test.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.540-547
• /
• 1998

light rail vehicle is modeled as a 2 d. o. f linear system for the design of vertical suspension characteristics and a 4 d. o. f. linear system for the design of lateral suspension characteristics. FRA's class-5-track irregularity is used for the exciting disturbance on track. Suspension stiffness and damping is selected on the basis of the ride quality and suspension stroke trade-off for the bogie of light rail vehicle. The optimum value of primary and secondary suspension characteristics is determined. And the stability of full vehicle model for the LRV is analyzed using the VAMPIRE program and critical speed is determined.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.7
• /
• pp.1097-1106
• /
• 2001

A telescopic handless is a kind of construction machinery for loading, carrying and unloading various cargos. A residual vibration of the boom, however, is often caused in carrying cargos to high workplace, especially in small motion and unloading operations, even when an expert of this machine handless the boom. To solve this vibrational problem, we applied TDC and newly proposed Commandless IST to the telescopic handler, and confirmed their effectiveness through experiments. These promising results show that the proposed control schemes can improve productivity, safety and ride comfort of the telescopic handler.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1395-1400
• /
• 2007

Tire flat spot is a deformation which occurs around the contact patch during long-period parking and does hardly recovered even after driving. The deformation makes a tire self-excited and ride comfort gets worse. In this study, it is shown that the flat spot can be evaluated by measuring change in radial run out or force. Its effects on vibration at vehicle floor and steering wheel are also revealed. Finally it is shown that the flat spot is likely to occur if the inflation pressure is low and the tire is suppressed by a heavy load at a high temperature.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.169-174
• /
• 2007

Adopting articulated bogie system, the HSR350x and KTX have similar physical mechanical characteristic, but they show different dynamic characteristics due to different position of suspensions and those physical properties. The low level vibration frequency which effects on the ride comfort of passengers and the high level vibration frequency which is related to noise of vehicle have been measured by accelerometers mounted on Wheel sets, Bogies and Car bodies to analysis the dynamic characteristics of the High-Speed Trains. The KTX number 36 is utilized to measure the lateral and vertical acceleration value of car body, and total measurement system of HSR350x have been used to acquire acceleration data. The sampling frequency of data is 500Hz generally, but the Car body at TT2 of HSR350 has 1000Hz exceptionally.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.273-274
• /
• 2012

This paper investigates control algorithms for a doubly fed induction generator(DFIG) with a back-to-back three-level neutral-point clamped voltage source converter in medium voltage wind power system under unbalanced grid conditions. Two different control algorithms to compensate for unbalanced conditions are proposed. Evaluation factors of control algorithm are fault ride-through(FRT) capability, efficiency, harmonic distortions and torque pulsation. Zero regulated negative sequence stator current control algorithm has the most effective performance concerning FRT capability and efficiency. Ripple-free control algorithm nullifies oscillation component of active power and reactive power. Ripple-free control algorithm shows the least harmonic distortions and torque pulsation. Combination of zero regulated negative sequence stator current and ripple-free control algorithm control algorithm depending on the operating requirements and depth of grid unbalance presents the most optimized performance factors under the generalized unbalanced operating conditions leading to high performance DFIG wind turbine system.