• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05b
• /
• pp.105-109
• /
• 2011

This study is concerned with the development of the SL inorganic floor covering. First, volatile organic compounds, inorganic test profile on the SL through the flooring is environment-friendly inorganic noncombustible floor finishes the event of fire toxic gases (such as volatile organic compounds) emissions have been identified as not at all. Second, SL-breathable material, the concrete floor to prevent aging, long life, which are three levels of noise, shock-absorbing function was decreased. Third, SL economic analysis of mineral flooring terrazzo tile floors compared with the normal material. On a terrazzo tile cost 13,500 won ~ 24,500 won, but It have found that, in terms of labor SL 36,899 won ~ 38,899 won flooring mineral balance. Occurs in the total amount when compared with terrazzo tile floors and 25,399 won 3T, 5T and economical analysis concludes that the original 12,399 won.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.312-312
• /
• 2011

All ship's ballast water should be inspected by administration after enter into force IMO BWM Convention. The purpose of the sampling device is to concentrate large amount of samples and to improve return rate of samples. It is composed of Concentration and Rinsing Part and optimized by the variety of tests. it is fully automated and therefore efficiently operated in ships.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.4
• /
• pp.93-101
• /
• 1993

This paper deals tilth an efficient algorithm in spectral fatigue analysis of ship structures. The concept of stress influence coefficients is suggested in order to obtain stress transfer functions efficiently which are the structural responses for unit load components. Strip method is applied to obtain the motion response and pressure distributions exerted on the hull. Since a number of the structural analysis should be performed for the various wave frequencies and heading angles in the spectral analysis, the algorithm developed in this study improves the efficiency of the analysis. Finally, the calculation example with application to this concept is shown in this paper.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.423-426
• /
• 1995

Langmuir-Blodgett technique offers a convenient and elegant way to organic conducting systems for ultra thin films. In conducting systems based on LB films, TCNQ derivatives have been extensively studied as electron acceptor molecules in a large number of organic conducting systems.[1] A very interesting UV-visible spectra of octadecylviologen-$(TCNQ^-)_2$ was obtained from a methylenechloride and acetonitrile mixture, and from Langmuir-Blodgett films. The ESR characteristics of octadecylviologen-$(TCNQ^-)_2$ were studied to understand conducting mechanism and structure of LB films. The ESR spectra infer that the N-dococylquinolinium-TCNQ LB films has anisotropic property. But octadecylviologen-$(TCNQ^-)_2$ does not show angular dependence. As the temperature increases from 350K to 450K, the ESR signal of LB films becomes sharp. Scanning calorimetry(DSC) of octadecylviologen-$(TCNQ^-)_2$ provides the endothermic reaction temperature of the films, 340K, which corresponds to the temperature, 365K, of the new ESR signal.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.8
• /
• pp.832-841
• /
• 2009

Wheels of UGV can be used to get the information about the ground. However, wheels of UGV with actively articulated suspension cannot be used as the roles because the each wheel does not remain in contact with the ground. Therefore, in this study, we proposed the indexes and models to estimate the contact wheels. First, we formulated the dynamic equations about the actively articulated suspensions and wheels. Then estimation index $I_{WTC}$ and $I_{ATC}$ were developed from the equations, and analyzed the strengths and weaknesses of each index. As the results, we developed the fuzzy rule-based estimation model additionally derived from our observations. $I_{WTC}$ model and $I_{ATC}$ model could eliminate the noise of about 60% in comparison with the result without the estimation model. Fuzzy model also could reduce the noise of about 83%. In addition, fuzzy rule-based estimation model had high sensitivity and precision as well as robustness.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.552-555
• /
• 2002

In order to achieve higher performance and low cost a-Si TFT-LCD panel, new material architecture and its process integration for a-Si TFT array manufacturing method were developed. Material combination of low resistant dry-etchable metal and new pixel electrode under currently adopted 4 mask process made it possible to get more-simplified manufacturing method and better device performance for the a-Si TFT-LCD application. Proposed 4 mask process architecture with optimized wet etchants and dry etching process was applicable to various devices such as notebook, monitor and TV.

• Proceedings of the Korea Society of Environmental Biology Conference
• /
• 2004.05a
• /
• pp.26-26
• /
• 2004

This study was conducted to evaluate the characteristics of dissolved orgamc matters based on their origins. The dissolved organic carbon(DOC) represents an index for dissolved organic matter and basically regarded as a source of organic pollution. The monthly variations and vertical profiles of dissolved organic carbon(DOC) in Kumoh reservoir were surveyed from May 2001 to April 2002. In addition, other areas such as river, reservoir, sewage and industrial wastewater were also surveyed in summer 2001. Kumoh reservoir was divided with depth into three layers .: epilimnion, metalimnion and hypolimnion. The proportion of total DOC(T-DOC) was classified by labile DOC(L-DOC) and refractory DOC(R-DOC) on the basis of long-term incubation. DOC of freshwater and Kumoh reservoir was ranged to be 1.6~4.1 mgC/L and 2.1~4.0 mgC/L, respectively. L-DOC accounted for 3~30% of DOC from watershed. Therefore, refractory dissolved organic carbon(R-DOC) was major component of DOC in the watershed. The decomposition rate(k) ranged from 0.008 $d^{-1}$ to 0.083 $d^{-1}$ in Kumoh reservoir. The highest decomposition rate(k) was observed at River Hoein III freshwater. Therefore, modified total organic carbon analyzer is needed to be applied for effective management of dissolved organic matter.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.6
• /
• pp.561-568
• /
• 2014

Injection molding industries realize the necessity of developing family molds to improve competitiveness. One of the primary causes of manufacturing defective products is the imbalance of flow in a family mold. In this study, the family mold of a shelf for refrigerators is analyzed by using CAE software. First, the flow balance, clamping force, and injection pressure are analyzed for different gate diameters of two cavities. Second, the flow balance, clamping force, and injection pressure are improved when the two gate valves are open at different times. Finally, the results of filling analysis are compared with the test injection product.

• Journal of the Korean Society of Physical Medicine
• /
• v.5 no.1
• /
• pp.35-42
• /
• 2010

Purpose : This study investigated to find the therapeutical effects of functional weight bearing exercise on the balance and gait in stroke. Methods : The subjects of this study were 13 hemiplegia was exercised using functional weight support exercise for 5 weeks, all of whom agreed to participate in the study. All subjects were measured to see their balance and gait with a Pro-3 balance system and Gait analysis. In order to assure the statistical significance of the results, we used for SPSS 12.0 for windows. Results : The results of this study were as follows : 1) There were statistically significant difference in medial-lateral stability and overall stability index. 2) There were statistically significant in distance and gait velocity index. Conclusion : According the results of this study, functional weight bearing exercise is effect on the balance and gait for hemiplegia.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.101-101
• /
• 2011

최근 반도체 및 디스플레이 사업의 급속한 발전으로 인해 반도체 공정은 초미세선폭화, 대면적화 되면서 오염입자를 제어하는 것이 이슈가 되고 있다. 반도체 및 디스플레이의 제조공정 중 챔버 내 진공부품은 진공상태에서 플라즈마에 의해 물리적인 데미지와 화학적으로 매우 활성이 높은 라디칼(Radical)반응에 의한 부식이 진행된다. 이러한 공정영향에 의해 챔버 내 부품들은 부식이 되고 공정 중에 오염입자가 발생하게 되어 반도체 및 디스플레이의 수율저하에 큰 영향을 미치고 부품교체 비용 또한 많이 들고 있다. 본 연구에서는 진공부품의 내전압측정방법을 이용하여 진공부품의 피막특성을 평가하는 연구방법으로서 내전압 지그(Zig)를 표준화하여 제작하였고, 재현성있는 데이터로 피막특성을 정량적으로 측정하는 방법을 연구 하였다. 식각공정 중에 발생하는 부식특성에 관해서는 화학부식와 플라즈마부식 열충격 등 각각 독립적으로 부식환경에 노출시켰으며, 진공부품의 손상 전 후의 내전압 특성변화를 이용하였다. 또한, CCP (Capacitativly Coupled Plasma)형의 RF magnetic sputter을 설계 제작하였고 진공부품에 고밀도 플라즈마를 발생시켜 플라즈마데미지에 의해 발생한 오염입자를 실시간으로 monitoring하여, 정량적으로 측정된 내전압특성결과를 비교 검증하였다.