• Journal of Environmental Impact Assessment
• /
• v.30 no.6
• /
• pp.339-354
• /
• 2021

The purpose of this study is to provide valuable information and data by analyzing the environmental status and potential forrenewable energy projects (or plans) based on environmental assessment (EA) data, so that more objective and scientific environmental assessments can be conducted. The study also suggests regional directions that could satisfy the goals of nature conservation and renewable energy. Based on the analysis of EA data that was conducted up until June 2019, the study analyzed the size, location and characteristics of both onshore wind power and onshore photovoltaic. The environmentally available potential by region was also derived by considering the main constraints and requirements related to the potential siting ofrenewable energy projects at the EA. Based on EA data, 63 out of 80 (79%) onshore wind power projects are shown to be located in mountainous areas. For onshore photovoltaic projects, a total of 7,363 projects were subjected to environmental assessment over the country. The environmentally potential area for onshore wind power, considering all the environmental regulatory factors, is 2,440 km². For onshore photovoltaic, the environmentally available area estimated as idle farmland is 2,877 km². The distribution and characteristics of the environmentally available potential of the region may be the most important factor that local governments should bear in mind in terms of promoting renewable energy development projects in the region. Based on the results of this study, even if we consider the national energy plan including the expected future increase, as well as environmental goals and socio-economic acceptance through an environmental assessment, the available resources forrenewable energy projects are not insufficient. It is possible to examine the adequacy of the target distribution rate of renewable energy sources by region taking into consideration the quantitative and scientific results such as the environmentally available potential data derived from this study.

• Land and Housing Review
• /
• v.12 no.3
• /
• pp.51-65
• /
• 2021

There were strong criticisms against the joint development method: the redevelopment corporation and developers would achieve the whole development profit. The existing tenants who lost their housing in the site argued their right to reside in the site after the development was completed. There was also strong political pressure that the Roh Tae-woo governing administration should resolve the social inequality caused by the situation. In such circumstances, it was introduced that a certain proportion of public rental housing should be built in the redevelopment site; then the government took over the dwellings at a price of construction and allocated them to the existing tenants. The aims of this paper are to understand the rationale behind the inclusion of the public rental housing in the redevelopment sites; and to investigate to what extent the legislation was implemented appropriately. Although the legislation was introduced in Seoul from August 1989, it was not until May 2005 when it was implemented nationwide. At the beginning, there was an ambiguous rule that the number of public housing to be included should be limited to the number of households who would want to remain in the redeveloped site. In 2005 the Seoul metropolitan authority introduced a mandatory proportion; 17% of the total housing delivered in the site should be public rental homes. Since then the proportion. The proportion has been fluctuated by the political agenda of each ruling party: the conservative tended to reduce the proportion, whilst the opposition parties increased the proportion. Currently the proportion is 20% of the total stock to be built. Initially the size of the public housing was exceptionally small- less than 40 m² but it has increased up to 60 m² since 2010. The rental price was reasonably lower than market rent. The competition toward redevelopment rental housing that are vacant due to move or death of tenants was very high; it was given to one household out of nine eligible households in 2020.

• Journal of Internet Computing and Services
• /
• v.22 no.4
• /
• pp.83-98
• /
• 2021

The purpose of this study to find the factors influencing the fire alarms using IoT firefighting facility management system data of Seoul Fire & Disaster Headquarters, and to present academic implications for establishing an effective prevention system of fire situation. As the number of high and complex buildings increases and former bulidings are advanced, the fire detection facilities that can quickly respond to emergency situations are also increasing. However, if the accuracy of the fire situation is incorrectly detected and the accuracy is lowered, the inconvenience of the residents increases and the reliability decreases. Therefore, it is necessary to improve accuracy of the system through efficient inspection and the internal environment investigation of buildings. The purpose of this study is to find out that false detection may occur due to building characteristics such as usage or time, and to aim of emphasizing the need for efficient system inspection and controlling the internal environment. As a result, it is found that the size(total area) of the building had the greatest effect on the fire alarms, and the fire alarms increased as private buildings, R-type receivers, and a large number of failure or shutoff days. In addition, factors that influencing fire alarms were different depending on the main usage of the building. In terms of time, it was found to follow people's daily patterns during weekdays(9 am to 6 pm), and each peaked around 10 am and 2 pm. This study was claimed that it is necessary to investigate the building environment that caused the fire alarms, along with the system internal inspection. Also, it propose additional recording of building environment data in real-time for follow-up research and system enhancement.

• Korean Journal of Environment and Ecology
• /
• v.35 no.5
• /
• pp.438-479
• /
• 2021

Basic information such as flora and their distribution are the key factors to consider for preserving plant diversity on a regional level. The number of plant species identified through a survey is closely related to the survey area and the number of habitats distributed within the survey area. In this study, we surveyed the flora of Mt. Maryong-san (PH) and Mt. Daeso-san (YH) located in Uljin-gun, Gyeongsangbuk-do, six and nine times, respectively. We planned to include a variety of habitats in the survey routes. As a result, we identified a total of 594 taxa composing of 112 families, 349 genera, 548 species, 10 subspecies, 34 varieties, and 2 formulas in the Mt. Maryong-san (PH) area and a total of 434 taxa composing of 89 families, 270 genera, 400 species, 9 subspecies, and 25 varieties in the Mt. Daeso-san (YH) area. Of the plants observed in the 21 habitats, the plants distributed in the transition zone around the valley and the dry grassland accounted for the highest proportion. The traditional graveyards located on the coast also served as the major habitat for the distribution of some plant species. In the two graveyards, 19 taxa of endemic plant species were surveyed. Moreover, the identified floristic target species included 1 taxon for grade V, 11 taxa for grade IV, and 24 taxa for grade III. A total of 77 taxa of naturalized plants were identified, and four of them were invasive alien plants as designated by the Ministry of Environment. The differences in the plants distributed in the area of Mt. Maryong-san (PH) and Mt. Daeso-san (YH) were mainly due to the difference in the size of each habitat distributed within the survey area. Moreover, it was judged that the entire vicinity of Mt. Daeso-san (YH) was not connected to the surrounding mountains and was an isolated area surrounded by farmland and residential areas.

• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.684-689
• /
• 2010

'Sangwon', a new cultivar for vegetable soybean, was developed from the cross between 'Keunolkong' and 'Oshimamidori', and was released at the National Institute of Crop Science (NICS) in 2007. The goal to develop a vegetable soybean cultivar with green pod, early maturity, large seed size, high yield, lodging tolerance, and resistance to disease such as soybean mosaic virus (SMV). 'Sangwon' has light green pod, early maturity, large seed, short plant height, and lodging tolerance. 'Sangwon' has determinate growth habit, white flower, gray pubescence, and oval leaf shape. The matured seeds have a yellow seed coat with light brown hilum, and a yellow cotyledon. 'Sangwon' has 5.8 cm fresh pod length, 13.2mm fresh pod width, 69.5 g seed weight per 100 green seeds, 44.0% green seed protein content, and 14.8% green seed oil content. At the regional yield trials (RYT) for vegetable soybean from 2005 to 2007, 'Sangwon' shows strong resistance to soybean mosaic virus (SMV) and tolerance to lodging in fields. Fresh pods of 'Sangwon' were harvested at the beginning of August. In the same tests, fresh pod of 'Sangwon' (10.39ton/ha) yielded 5% higher than 'Hwaeomputkong' (9.90ton/ha).

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.198-221
• /
• 2017

The Jjoksaem site is the eastern sector of Daereungwon Ancient Tomb Complex, Gyeongju(the 512th Historic site) called Wolseong North Burial Ground in academic community. The excavation and research of this site was conducted from 2007 to 2015, with the purpose of basic data offering for the restoration of Silla tumuli and development of ancient tomb park. As a result of the investigation, more than 700 new tombs were discovered except the 155 tumuli founded in the Japanese colonial era. Moreover, more than 70 percent of the smaller tombs, such as outer coffin tombs, were discovered here. There are four characteristics of outer coffin tombs in Jjoksaem site. First, it is recognized the Gyeongju-styled outer coffin tombs have a long rectangular shape, distinct from Gimhae-styled outer coffin tombs in a rectangular shape. Second, they are divided into three groups by the size of the grave area. This is indirectly related to the rank and the status of the buried person. Third, these tombs began to be constructed at the end of the 3rd century before the time of wooden chamber tombs covered by stone and earthen mound. They were ruined because of the new tombs constructed at the period of Maripgan. This reflects that the identity of the former tombs was not respected by the communities in the later generations. Outer coffin tombs were consistently made to the end of the era of wooden chamber tombs covered by stone and earthen mound. Lastly, the area of burial ground of outer coffin tombs is limited by wooden chamber tombs covered by stone and wooden mounds. Otherwise, the location of the burial ground for the deceased is limited by the status of the deceased. The idea that wooden chamber tombs covered by stone and earthen mound are located on the above ground turns out to be incorrect. In Jjoksaem site, there is little difference between the height of the circular burial protection stone and the height of the digging lines of the other tombs. In the case of No.44 tumulus, the lowest step of the circular burial protection stones is lower than those of the other tombs and tumuli. Research of outer coffin tombs at Jjoksaem site will be to suggest important academic data about the changing period from Saroguk, as the head of chiefdom union, to Silla, as state.

• Journal of Life Science
• /
• v.28 no.11
• /
• pp.1255-1261
• /
• 2018

Whole genome analysis have been made possible with the development of DNA sequencing technologies and discovery of many single nucleotide polymorphisms (SNPs). Large number of SNP can be analyzed with SNP chips, since SNPs of human as well as livestock genomes are available. Among the various missing nucleotide imputation programs, Minimac3 software is suggested to be highly accurate, with a simplified workflow and relatively fast. In the present study, we used Minimac3 program to perform genomic missing value substitution 1,226 animals 770K SNP chip and imputing missing SNPs with next generation sequencing data from 311 animals. The accuracy on each chromosome was about 94~96%, and individual sample accuracy was about 92~98%. After imputation of the genotypes, SNPs with R Square ($R^2$) values for three conditions were 0.4, 0.6, and 0.8 and the percentage of SNPs were 91%, 84%, and 70% respectively. The differences in the Minor Allele Frequency gave $R^2$ values corresponding to seven intervals (0, 0.025), (0.025, 0.05), (0.05, 0.1), (0.1, 0.2), (0.2, 0.3). (0.3, 0.4) and (0.4, 0.5) of 64~88%. The total analysis time was about 12 hr. In future SNP chip studies, as the size and complexity of the genomic datasets increase, we expect that genomic imputation using Minimac3 can improve the reliability of chip data for Hanwoo discrimination.

• Journal of Life Science
• /
• v.28 no.11
• /
• pp.1354-1360
• /
• 2018

The aim of this study was to develop a simple, environmentally friendly synthesis of silver nanoparticles (SNPs) without the use of chemical reducing agents by exploiting the extracellular synthesis of SNPs in a culture supernatant of Bacillus thuringiensis CH3. Addition of 5 mM $AgNO_3$ to the culture supernatant at a ratio of 1:1 caused a change in the maximum absorbance at 418 nm corresponding to the surface plasmon resonance of the SNPs. Synthesis of SNPs occurred within 8 hr and reached a maximum at 40-48 hr. The structural characteristics of the synthesized SNPs were investigated by various instrumental analysis. FESEM observations showed the formation of well-dispersed spherical SNPs, and the presence of silver was confirmed by EDS analysis. The X-ray diffraction spectrum indicated that the SNPs had a face-centered cubic crystal lattice. The average SNP size, calculated using DLS, was about 51.3 nm and ranged from 19 to 110 nm. The synthesized SNPs exhibited a broad spectrum of antimicrobial activity against a variety of pathogenic Gram-positive and Gram-negative bacteria and yeasts. The highest antimicrobial activity was observed against C. albicans, a human pathogenic yeast. The FESEM observations determined that the antimicrobial activity of the SNPs was due to destruction of the cell surface, cytoplasmic leakage, and finally cell lysis. This study suggests that B. thuringiensis CH3 is a potential candidate for efficient synthesis of SNPs, and that these SNPs have potential uses in a variety of pharmaceutical applications.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_4
• /
• pp.1479-1488
• /
• 2018

On September 3rd 2017, strong artificial seismic signals from North Korea were detected in KMA (Korea Meteorological Administration) seismic network. The location of the epicenter was estimated to be Punggye-ri nuclear test site and it was the most powerful to date. The event was not studied well due to accessibility and geodetic measurements. Therefore, we used remote sensing data to analyze surface changes around Mt. Mantap area. First of all, we tried to detect surface deformation using InSAR method with Advanced Land Observation Satellite-2 (ALOS-2). Even though ALOS-2 data used L-band long wavelength, it was not working well for this particular case because of decorrelation on interferogram. The main reason would be large deformation near the Mt. Mantap area. To overcome this limitation of decorrelation, we applied offset tracking method to measure deformation. However, this method is affected by window kernel size. So we applied various window sizes from 32 to 224 in 16 steps. We could retrieve 2D surface deformation of about 3 m in maximum in the west side of Mt. Mantap. Second, we used Pleiadas-A/B high resolution satellite optical images which were acquired before and after the 6th nuclear test. We detected widespread surface damage around the top of Mt. Mantap such as landslide and suspected collapse area. This phenomenon may be caused by a very strong underground nuclear explosion test. High-resolution satellite images could be used to analyze non-accessible area.

• Korean Journal of Poultry Science
• /
• v.46 no.1
• /
• pp.25-30
• /
• 2019

This study was conducted to investigate basic data of development for appropriate management system in broiler. Data such as ages at marketing, livability, body weight, etc. were collected from a total of 53 broiler farms located in Chungnam, Chungbuk, Jeollanam, Jeollabuk, Gyeongbuk. 1. Average of ages at marketing were 32 days. Those of windowless house and open-type house were 31.96 and 32.03 days, respectively. The significant difference among four seasons was highly found (P<0.001). The longest ages at marketing were 32.86 days in winter. Average of livability was 96.25%. According to type of chick house, those of windowless house and open-type house were 95.93% and 96.59%, respectively. The livability according to season showed significant difference (P<0.05). The highest livability was 97.39% in autumn. However, the lowest livability was 95.36% in summer. 2. Average body weight at marketing was 1.62 kg. The significant difference was found in marketing weight by season (P<0.05). The heaviest body weight was 1.65 kg in winter, but the lowest weight was 1.60 kg in summer. Average of FCR was 1.62. the significant differences according to the season were highly found (P<0.01). Especially, the best FCR was 1.59 in autumn. Average cycles of marketing was 5.70. The significant differences according to farms size were found (P<0.05), cycles of small farms and big farms were 5.8 and 5.3, respectively. The ages at marketing were highly correlated with marketing weight (r=0.684) and feed conversion (r=0.439). The correlation between feed conversion and livability was highly negative (r=-0.614). According to the above result, livability and body weight at marketing were badly detected in summer. In conclusion, broiler farms should be controlled through properly environmental management system for improvement of performances.