• Smart Structures and Systems
• /
• 제24권4호
• /
• pp.427-434
• /
• 2019

This study investigates the structural integrity of the amphibious tour bus under the rollover condition. The multi-purpose bus called Dual Mode Tour Bus (DMTB) which explores on land and water has been designed on top of a truck platform. Prior to the fabrication of new upper body and sailing equipment of DMTB, computational analysis investigates the rollover protection of the proposed structure including superstructure, wheels, and axles. The Computer-Aided Design (CAD) of the whole vehicle model is meshed and preprocessed under high performance using the Altair HyperMesh to attain the best mesh model suited for finite element analysis (FEA) on the proposed system. Meanwhile, the numerical model is analyzed by employing LS-DYNA to evaluate the superstructure strength. The numerical model includes detail information about the microstructure and considers wheels and axles as rigid bodies but excludes window glasses, seats, and interior parts. Based on the simulation analysis and proper modifications especially on the rear portion of the bus, the local stiffness significantly increased. The vehicle is rotated to the contact point on the ground based on the mathematical method presented in this study to save computational cost. The results show that the proposed method of rollover analysis is highly significant not only in bus rollover tests but in crashworthiness studies for other application. The critical impartments in our suggested dual-purpose bus accepted and passed "Economic Commission for Europe (ECE) R66".

• Membrane and Water Treatment
• /
• 제6권4호
• /
• pp.277-292
• /
• 2015

The extraction of lactic acid by an emulsion liquid membrane (ELM), in batch and continuous mode, has been reported. On the basis of preliminary experiments, the optimum composition of the organic phase (membrane) is determined. When the SPan 80 is used as surfactant, the emulsion breakage exceeds 50%, but only 10% is obtained when the ECA4360 is used. The effects of surfactant, carrier and solute concentrations, phase volume ratio, and stirring speed on the extraction yield were examined and optimized. Surfactant, carrier and diluent used were ECA4360, trilaurylamine (TLA) and dodecane, respectively; 2-ethylhexane-1,3-diol (EHD) is used as a co-surfactant. Under optimal conditions, emulsion breaking is very low and the swelling is kept at its lowest level. Under the pH conditions of fermentation medium, the extraction yield is lower. A mixer-settler continuous system was used for testing these conditions. The residence time, the number of extraction stages and the stability of the emulsion were studied and optimized. The extraction yield obtained exceeds 90%.

• Nuclear Engineering and Technology
• /
• 제46권1호
• /
• pp.11-26
• /
• 2014

The analyses carried out within the Seismic Probabilistic Risk Assessments (SPRAs) of Nuclear Power Plants (NPPs) are affected by significant aleatory and epistemic uncertainties. These uncertainties have to be represented and quantified coherently with the data, information and knowledge available, to provide reasonable assurance that related decisions can be taken robustly and with confidence. The amount of data, information and knowledge available for seismic risk assessment is typically limited, so that the analysis must strongly rely on expert judgments. In this paper, a Dempster-Shafer Theory (DST) framework for handling uncertainties in NPP SPRAs is proposed and applied to an example case study. The main contributions of this paper are two: (i) applying the complete DST framework to SPRA models, showing how to build the Dempster-Shafer structures of the uncertainty parameters based on industry generic data, and (ii) embedding Bayesian updating based on plant specific data into the framework. The results of the application to a case study show that the approach is feasible and effective in (i) describing and jointly propagating aleatory and epistemic uncertainties in SPRA models and (ii) providing 'conservative' bounds on the safety quantities of interest (i.e. Core Damage Frequency, CDF) that reflect the (limited) state of knowledge of the experts about the system of interest.

• Journal of Species Research
• /
• 제10권2호
• /
• pp.164-167
• /
• 2021

According to Article 9.3 of the International Code of Nomenclature for algae, fungi, and plants(Shenzhen Code), a lectotype may be selected as the nomenclatural type from the original material, if the name was published without a holotype. While reviewing the genus Scrophularia collected in Northeast Asia, we found that two species, S. alata A. Gray and S. kakudensis Franch., were still untypified. S. alata has three specimens considered as syntypes in two herbaria, Harvard University and the Smithsonian Institution. For S. kakudensis, two specimens considered as syntypes at the Muséum National d'Histoire Naturelle, Paris were classified as normal specimens, not type specimens. Therefore, two species of Scrophularia L. namely, S. alata A. Gray and S. kakudensis Franch., are lectotypified. The lectotypes are kept in the Harvard University and the Muséum National d'Histoire Naturelle, Paris, respectively. Furthermore, some nomenclatural issues related to these names are discussed, and the photographs of the selected lectotypes are provided.

• 대한수학회지
• /
• 제56권4호
• /
• pp.869-915
• /
• 2019

Let H be a Krull monoid with class group G such that every class contains a prime divisor. Then every nonunit $a{\in}H$ can be written as a finite product of irreducible elements. If $a=u_1{\cdot}\;{\ldots}\;{\cdot}u_k$ with irreducibles $u_1,{\ldots},u_k{\in}H$, then k is called the length of the factorization and the set L(a) of all possible k is the set of lengths of a. It is well-known that the system ${\mathcal{L}}(H)=\{{\mathcal{L}}(a){\mid}a{\in}H\}$ depends only on the class group G. We study the inverse question asking whether the system ${\mathcal{L}}(H)$ is characteristic for the class group. Let H' be a further Krull monoid with class group G' such that every class contains a prime divisor and suppose that ${\mathcal{L}}(H)={\mathcal{L}}(H^{\prime})$. We show that, if one of the groups G and G' is finite and has rank at most two, then G and G' are isomorphic (apart from two well-known exceptions).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권3호
• /
• pp.894-907
• /
• 2022

The features extracted by convolutional neural networks are more descriptive of images than traditional features, and their convolutional layers are more suitable for retrieving images than are fully connected layers. The convolutional layer features will consume considerable time and memory if used directly to match an image. Therefore, this paper proposes a feature weighting and region integration method for convolutional layer features to form global feature vectors and subsequently use them for image matching. First, the 3D feature of the last convolutional layer is extracted, and the convolutional feature is subsequently weighted again to highlight the edge information and position information of the image. Next, we integrate several regional eigenvectors that are processed by sliding windows into a global eigenvector. Finally, the initial ranking of the retrieval is obtained by measuring the similarity of the query image and the test image using the cosine distance, and the final mean Average Precision (mAP) is obtained by using the extended query method for rearrangement. We conduct experiments using the Oxford5k and Paris6k datasets and their extended datasets, Paris106k and Oxford105k. These experimental results indicate that the global feature extracted by the new method can better describe an image.

• Coupled systems mechanics
• /
• 제11권1호
• /
• pp.15-32
• /
• 2022

The comprehensive understanding of the fiber reinforced polymer behavior requires the use of advanced non-destructive testing methods due to its heterogeneous microstructure and anisotropic mechanical proprieties. In addition, the material response under load is strongly associated with manufacturing defects (e.g., voids, inclusions, fiber misalignment, debonds, improper cure and delamination). Such imperfections and microstructures induce various damage mechanisms arising at different scales before macrocracks are formed. The origin of damage phenomena can only be fully understood with the access to underlying microstructural features. This makes X-ray Computed Tomography an appropriate imaging tool to capture changes in the bulk of fibrous materials. Moreover, Digital Volume Correlation (DVC) can be used to measure kinematic fields induced by various loading histories. The correlation technique relies on image contrast induced by microstructures. Fibrous composites can be reinforced by different fiber architectures that may lead to poor natural contrast. Hence, a priori analyses need to be performed to assess the corresponding DVC measurement uncertainties. This study aimed to evaluate measurement resolutions of global and regularized DVC for glass fiber reinforced polymers with different fiber architectures. The measurement uncertainties were evaluated with respect to element size and regularization lengths. Even though FE-based DVC could not reach the recommended displacement uncertainty with low spatial resolution, regularized DVC enabled for the use of fine meshes when applying appropriate regularization.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• 제34권3호
• /
• pp.159-168
• /
• 2023

Objectives: Non-suicidal self-injury (NSSI) has been theoretically, clinically, and empirically associated with emotional dysregulation. NSSI is a means of regulating emotional states, particularly negative emotions. However, empirical studies on this topic are scarce and the literature lacks qualitative research on individuals' perceptions and comprehension of the function of self-injury. Thus, this qualitative study aimed to provide novel insights into the relationship between NSSI and emotional dysregulation in young adults. Methods: Twelve participants (mean age=22.7 years, 9 females and 3 males) from different support groups and a healthcare center participated in semi-structured interviews on NSSI-related emotional processes. Three aspects were investigated: reasons for NSSI, function of NSSI, and emotions. Each interview was voice recorded and typically lasted between 20 and 40 minutes. All responses were analyzed using thematic analysis. Results: Four major themes were identified. The results showed that NSSI had both intrapersonal and interpersonal functions, within which emotional regulation played a significant role. NSSI was also used to regulate positive emotions. The results also showed a sequence of emotions among the participants, going from feeling overwhelmed to feeling relatively calm but guilty. Conclusion: NSSI has several functions for the same individual. Thus, it would be interesting to provide integrative therapy, such as emotion-focused therapy, which focus on improving intrapersonal and interpersonal emotion regulation skills and strategies.

• Geomechanics and Engineering
• /
• 제35권2호
• /
• pp.209-219
• /
• 2023

This paper presents numerical investigations into the particle crushing effect on the shear properties of gravel under direct shear condition. A novel particle crushing model was developed based on the octahedral shear stress criterion and fragment replacement method. A series of direct shear tests were carried out on unbreakable particles and breakable particles with different strengths. The evolutions of the particle crushing, shear strength, volumetric strain behavior, and contact force fabric during shearing were analyzed. It was observed that the number of crushed particles increased with the increase of the shear displacement and axial pressure and decreased with the particle strength increasing. Moreover, the shear strength and volume dilatancy were obviously decreased with particle crushing. The shear displacement of particles starting to crush was close to that corresponding to the peak shear stress got. Besides, the shear-hardening behavior was obviously affected by the number of crushed particles. A microanalysis showed that due to particle crushing, the contact forces and anisotropy decreased. The mechanism of the particle crushing effect on the shear strength was further clarified in terms of the particle friction and interlock.

• 패션비즈니스
• /
• 제13권6호
• /
• pp.125-136
• /
• 2009

The main objective of this research was to understand the characteristics of complementary color scheme through the analysis of contemporary women's fashion color coordination as they appear in the 'Collections'. Data collection of 115 was done through review of 'pr$\hat{e}$t-$\grave{a}$-porter Collections' of four cities; Milan, London, New York, Paris. Statistical analysis of frequency and also qualitative interpretation of characteristics of complementary color harmony characteristics which appeared in four collections were completed. The main findings were as followed; (1) Only 115 complementary color schemes out of 4968 two color combinations appeared. Compared the comparative ratios of appearance frequency between the two color combination and the complementary color harmony, London showed the highest, and followed by New York, and Milan and Paris. (2)The combined color type of 'red+green' was the most frequently appeared, and followed by 'violet+yellow' and 'orange+blue'. For the type of tone harmony, the contrast tone showed the most, and followed by the similarity and identity. According to the type of complementary color combination, the type of tone harmony used differently. Some differences showed in the types of color harmony and tone harmony between collections. (3) The complementary color scheme which shown in four collections harmonized two opposite colors mainly through the strong tone contrast and this could cause tension along with interest in the image. The complementary colors intensified and brought out the attributes each other. More details, high contrast of two complementary colors of yellow and violet created a vibrant look especially when used at higher saturation. Sometimes, however, some tone variations of two hues neutralized the strong effect and sometimes enhanced each other. When they used in similarity tones or identity tones in light colors, the tension was reduced and became softened but still presented nice harmony. In the type of 'red+green' color harmony, the various color combinations were demonstrated, mostly through tone manipulation of green color. The similarity tone harmony, which used the most, could effect a better sense of harmony and present more sophisticated looks. When used in contrast tone harmony, some changes in its own color which have only one color of two the excessive intensity led a good harmony. The 'orange+blue' color harmony was shown the least and used three tone harmony almost the same ratio. In this color harmony, blue amplified its energy and brilliance of orange and seemed to work better when one color was at a lower intensity than the other. In harmony with a similarity and an identity tone, this color harmony produces a stable and calm image. (4) The complementary scheme appeared more frequently in the S/S collections than in A/W collections and showed some differences in the types of color harmony and tone harmony between seasons, however, no big differences between collections.