• 전기학회논문지
• /
• 제59권9호
• /
• pp.1600-1604
• /
• 2010

This paper presents the optimum design of the brushless motor to maximize the output power per weight considering the design parameter tolerance. The optimization is proceeded by commercial software that is adopted the scatter-search algorithm and the characteristic analysis is conducted by FEM. The stochastic optimum design results are compared with those of the deterministic optimization method. We can verify that the results of the stochastic optimization is superior than that of deterministic optimization.

• 한국CDE학회논문집
• /
• 제10권4호
• /
• pp.284-292
• /
• 2005

This paper presents a new framework of kinematic tolerance synthesis and describes the implemented algorithm for planar mechanical systems comprised of higher kinematic pairs. Input to the synthesis algorithm is a parametric model of the mechanical system with allowed parameter ranges (tolerance ranges). The model is specified as the part profiles consisting of line and arc segments and the motion axes along which each part moves. The algorithm analyzes tolerance in generalized configuration space, called contact zones bounding the worst-case variations, and identifies bad system variations. The bad system variations then are removed out of the parameter ranges by adjusting the nominal parameter values if possible and then shrinking the ranges otherwise. This cycle is repeated until no more bad variations we found. I show the effectiveness of the algorithm by case studies on several mechanisms.

• 품질경영학회지
• /
• 제30권1호
• /
• pp.97-117
• /
• 2002

We apply Taguchi method to the process optimization problem of chemical reaction process, and some case studies are done to find out the way for cost reduction and quality improvement The parameter and tolerance designs of Taguchi mettled are done with operation data of a chemical process and we propose a procedure how to use and analyze the operation data to find the optimal process conditions and tolerance limits. In order to use the continuous values in experiment conditions, it is suggested how to determine the interval of each level by discrete values and to treat any missing values caused from discrete 4 levels.

• 대한안전경영과학회지
• /
• 제13권1호
• /
• pp.203-209
• /
• 2011

This study develops three new models that are practically applicable to three stages of Taguchi's robust design, which includes system design, parameter design and tolerance design. In system design, the Multiple Loss Function Analysis(MLFA) and Overall Loss Index(OLI) which reflect upon weight of characteristics and importance of specification are developed. Moreover parameter design presents Process Capability Index(PCI), $C_{PUK}$ and $C_{PLK}$, in order to segregate Signal-To-Noise Ratio(SNR) into accuracy and precision for an evaluation of relative comparison. In addition, tolerance design presents the new model of allowance computation for assembled product which is primarily derived from safety margin(SM) considering functional limit and specification. The guideline of those three new models, which include systematic charts and applicable illustrations, offers convenience for practitioners in the field. Hence, the practical applications could be made with the steps of robust designs such as system design, parameter design and specification allowance design.

• 대한산업공학회지
• /
• 제20권4호
• /
• pp.99-111
• /
• 1994

Toguchi method is a systematic technique for designing high quality product at low cost. There are three steps in the Toguchi method, 1)system design, 2)parameter design, and 3)tolerance design. This paper considers the tolerance design for multiple performance characteristics which is practically important. We present two tolerance design procedures : grade selection and tolerance determining procedures. In grade selection procedure a scheme is presented that minimizes the sum of the price of low-level characteristics and the expected loss due to the variations of high-level characteristics. In tolerance determining procedure we determine the tolerances of the low-level characteristics.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.95-99
• /
• 1996

The form accuracy of parts has become an important parameter. Therefore dimensional tolerance and geometric tolerance are used in design to satisfy required quility and functions of parts. But the informations for machining conditions, which can satisfy the assigned geometric tolerance in design, are insufficient. The objectives of this research are to study the effects of the grinding parameters such as traverse speed, work speed, depth of cut, and dwell time on the after-ground workpiece shape, and to find out the major parameters among these parameters. Finally, a methodology is proposed for getting the optimal grinding condition for precision workpiece The results are as follows; The effects of work speed and depth of cut on workpiece shape are ignorable compared to the effect of traverse speed. These is the optimal dwell time depending on the traverse speed. The optimal dwell time is decreasing when the traverse speed is increased.

• 품질경영학회지
• /
• 제30권4호
• /
• pp.58-67
• /
• 2002

Since the inception of off-line quality control, it has drawn a particular attention from research community and it has been implemented in a wide variety of industries mainly due to its extensive applicability to numerous real situations. Emphasizing design issues rather than control issues related to manufacturing processes, off-line quality control has been recognized as a cost-effective approach to quality improvement. It mainly consists of three design stages: system design, parameter design, and tolerance design which are implemented in a sequential manner. Utilizing experimental designs and optimization techniques, off-line quality control is aimed at achieving product performance insensitive to external noises by reducing process variability. In spite of its conceptual soundness and practical significance, however, off-line quality control has also been criticized to a great extent due to its heuristic nature of investigation. In addition, it has also been pointed out that the process optimization procedures are inefficient. To enhance the current practice of off-line quality control, this study proposes an integrated optimization model by utilizing a well-established statistical tool, so called response surface methodology (RSM), and a tolerance - cost relationship.

• 한국정밀공학회지
• /
• 제15권7호
• /
• pp.61-68
• /
• 1998

The form accuracy of parts has become an important parameter. Therefore, dimensional tolerance and geometric tolerance are used in the design stage to satisfy required quality and functions of parts. But the informations on the machining conditions, which can satisfy the assigned geometric tolerance in design, are insufficient. The objectives of this research are to study the effects of the grinding parameters such as traverse speed, work speed, depth of cut, and dwell time on the after-ground workpiece shape, and to find out the major parameters among them. The results are as follows, The effects of work speed and depth of cut on workpiece shape are negligible compared with the effect of traverse speed. There is an optimal dwell time depending on the traverse speed. The optimal dwell time is decreasing as the traverse speed is increased.

• Journal of the Korean Data Analysis Society
• /
• 제20권6호
• /
• pp.2721-2731
• /
• 2018

This study purposes to derive the predictive model for the cold tolerance of Brassica napus, using the data collected in the Tree Breeding Lab of Gyeongsang National University during July and August of 2016. Three Brassica napus samples were treated at each of low temperatures from $4^{\circ}C$ to $-12^{\circ}C$ by decrement of $4^{\circ}C$, step by step, and electrolyte leakage levels were measured at each stage. Electrolyte leakages were observed tangibly from $-4^{\circ}C$. We tried to fit the six nonlinear regression models to the electrolyte leakage data of Brassica napus: 3-parameter logistic model, baseline logistic model, 4-parameter logistic model, (4-1)-parameter logistic model, 3-parameter Gompertz model, and (3-1)-parameter Gompertz model. The baseline levels of the electrolyte leakage estimated by these models were 4.81%, 4.07%, 4.19%, 4.07%, 4.55%, and 0%, respectively. The estimated median lethal temperature, LT50, were $-5.87^{\circ}C$, $-6.31^{\circ}C$, $-6.05^{\circ}C$, $-6.35^{\circ}C$, $-4.98^{\circ}C$, and $-5.15^{\circ}C$, respectively. We compared and discussed the measures of goodness of fit to select the appropriate nonlinear regression model.

• 한국정밀공학회지
• /
• 제13권6호
• /
• pp.66-77
• /
• 1996

This paper presents a method for tolerance design using the Taguchi Method(TM) and general purpose mechanism analysis program. Also the method is tolerance design with repect to performance improvement of a mechamism. To use the orthogonal array, mathematical model of a mechanism is established and experiments are carried out by the general purpose mechanism analysis program. The contact model is used to consider a clearance effect. This method is applied to the VTR Deck mechanism. This method can be used in tolerance design of general mechanisms.