• International Journal of Control, Automation, and Systems
• /
• v.6 no.6
• /
• pp.818-827
• /
• 2008

In this paper, we propose a new noise estimation and reduction algorithm for stationary and nonstationary noisy environments. This approach uses an algorithm that classifies the speech and noise signal contributions in time-frequency bins. It relies on the ratio of the normalized standard deviation of the noisy power spectrum in time-frequency bins to its average. If the ratio is greater than an adaptive estimator, speech is considered to be present. The propose method uses an auto control parameter for an adaptive estimator to work well in highly nonstationary noisy environments. The auto control parameter is controlled by a linear function using a posteriori signal to noise ratio(SNR) according to the increase or the decrease of the noise level. The estimated clean speech power spectrum is obtained by a modified gain function and the updated noisy power spectrum of the time-frequency bin. This new algorithm has the advantages of much more simplicity and light computational load for estimating the stationary and nonstationary noise environments. The proposed algorithm is superior to conventional methods. To evaluate the algorithm's performance, we test it using the NOIZEUS database, and use the segment signal-to-noise ratio(SNR) and ITU-T P.835 as evaluation criteria.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.5
• /
• pp.944-957
• /
• 2007

In general mechanical servo systems, friction deteriorates the performance of controllers by its nonlinear characteristics. Especially, friction phenomenon causes steady-state tracking errors and limit cycles in position and velocity control systems, even though gains of controllers are tuned well in linear system model. Even if sensor is used higher accuracy level, it is difficult to improve tracking performance of the position to the same level with a general control method such as PID type. Therefore, many friction models were proposed and compensation methods have been researched actively. In this paper, we consider that the variation of mover's mass is various by loading and unloading. The normal force variation occurs by it and other parameters. Therefore, the proposed control system is composed of main position controller and a friction compensator. A parameter estimator for a nonlinear friction model is designed by adaptive control law and adaptive backstopping control method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2526-2531
• /
• 2005

A practical pinch torque estimator based on the Kalman filter is proposed for low-cost anti-pinch window control systems. To obtain the accurate angular velocity from Hall-effect sensor measurements, the angular velocity calculation algorithm is executed with additional procedures for removing the measurement noises. Apart from the previous works using the angular velocity estimates and torque estimates for detecting the pinched condition, the torque rate is augmented to the system model and the proposed pinch estimator is derived by applying the steady-state Kalman filter recursion to the model. The motivation of this approach comes from the idea that the bias errors in torque estimates due to the motor parameter uncertainties can be almost eliminated by introducing the torque rate state. For detecting the pinched condition, a systematic way to determine the threshold level of the torque rate estimates is also suggested via the deterministic estimation error analysis. Simulation results are given to certify the pinch detection performance of the proposed algorithm and its robustness against the motor parameter uncertainties.

• Journal of IKEEE
• /
• v.1 no.1 s.1
• /
• pp.55-63
• /
• 1997

The purpose of this paper is to realize robust vector control of an induction motor without speed sensor. In order to do it, the speed of an induction motor is estimated using model reference adaptive system(MRAS) and two rotor flux observers which have robustness to the parameter variation are employed as the reference model and the adjustable model in MRAS speed estimator. The MRAS-based overall control scheme has been implemented on 2.2kW induction motor control system and it is verified that the proposed speed sensorless control scheme is more stable and robust than the conventional schemes.

• Journal of the Korean Data and Information Science Society
• /
• v.6 no.1
• /
• pp.1-11
• /
• 1995

The parameters in the multiplicative model $Y_{1}={\alpha}_{0}{\prod}^{p}_{k=1}X_{kj}^{{\beta}_K}v_{j}$ are usually estimated by the least squares method after logarithmic transformation, and the least square Estimator of ${\alpha}_{0}$ is known to be biased, i.e., $E(e xp(\hat{\beta}_{0})){\neq}{\alpha}_{0})$. In the present study the unbaised estimators of ${\alpha}_{0}$ are examined(1) by modifying the least squares estimator and (2) by applying the Finney's results. The variances are also compared. In addition it has been observed that multiplicative model can be used to express the relationship beetween rice yield and yield components.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.2
• /
• pp.140-148
• /
• 2000

A robust current control technique with a simple time delayed estimator for a permanent magnet synchronous m motor (PMSM) drive is presented. Among the various CWTent control schemes for a voltage source inverter-fed P PMSM drive, the predictive control is known to give a superior performance. This control technique, however, r requires the full knowledge of machine parameters and operating conditions, and gives an unsatisfactory r response under the parameter mismatch between the motor and controller. To overcome such a limitation, the d disturbances caused by the parameter valiations will be estimated by using a" time delay contTol approach and u used for the computation of the reference voltages by a simple feedforwal"d control. The proposed control $ scheme is implemented on a PMSM using the software of DSP TlVIS:32OC:30 and the effectiveness is verified d through the comparative simulations and experiments.periments.

• The Korean Journal of Applied Statistics
• /
• v.27 no.6
• /
• pp.1017-1028
• /
• 2014

Well-known Bayes and empirical Bayes estimators have a disadvantage in respecting to overshink the parameter estimator error; therefore, a constrained Bayes estimator is suggested by matching the first two moments. Also traditional loss function such as mean square error loss function only considers the precision of estimation and to consider both precision and goodness of fit, balanced loss function is suggested. With these reasons, constrained Bayes estimators under balanced loss function is recommended for non-life insurance pricing.; however, most studies focus on the performance of estimation since Bayes risk of newly suggested estimators such as constrained Bayes and constrained empirical Bayes estimators under specific loss function is difficult to derive. This study compares the Bayes risk of several Bayes estimators under two different loss functions for estimating the risk in the auto insurance business and indicates the effectiveness of the newly suggested Bayes estimators with regards to Bayes risk perspective through auto insurance real data analysis.

• Journal of Power Electronics
• /
• v.6 no.3
• /
• pp.235-244
• /
• 2006

Recently, speed sensorless vector control for synchronous reluctance motors (SYRMs) has deserved attention because of its advantages. Although rotor angle calculation using flux estimation is a straightforward approach, the DC offset can cause an increasing pure integrator error in this estimator. In addition, this method is affected by parameter fluctuation. In this paper, to control the motor at the low speed region, a modified programmable cascaded low pass filter (MPCPLF) with sensorless online parameter identification based on a block pulse function is proposed. The use of the MPCLPF is suggested because in programmable, cascade low pass filters (PCLPF), which previously have been applied to induction motors, the drift increases vastly wl)en motor speed decreases. Parameter identification is also used because it does not depend on estimation accuracy and can solve parameter fluctuation effects. Thus, sensorless speed control in the low speed region is possible. The experimental system includes a PC-based control with real time Linux and an ALTERA Complex Programmable Logic Device (CPLD), to acquire data from sensors and to send commands to the system. The experimental results show the proposed method performs well, speed and angle estimation are correct. Also, parameter identification and sensorless vector control are achieved at low speed, as well as, as at high speed.

• Journal of the Korean Statistical Society
• /
• v.30 no.2
• /
• pp.179-192
• /
• 2001

When a statistical model has a hierarchical structure such as multilayer perceptrons in neural networks or Gaussian mixture density representation, the model includes distribution with unidentifiable parameters when the structure becomes redundant. Since the exact structure is unknown, we need to carry out statistical estimation or learning of parameters in such a model. From the geometrical point of view, distributions specified by unidentifiable parameters become a singular point in the parameter space. The problem has been remarked in many statistical models, and strange behaviors of the likelihood ratio statistics, when the null hypothesis is at a singular point, have been analyzed so far. The present paper studies asymptotic behaviors of the maximum likelihood estimator and the Bayesian predictive estimator, by using a simple cone model, and show that they are completely different from regular statistical models where the Cramer-Rao paradigm holds. At singularities, the Fisher information metric degenerates, implying that the cramer-Rao paradigm does no more hold, and that he classical model selection theory such as AIC and MDL cannot be applied. This paper is a first step to establish a new theory for analyzing the accuracy of estimation or learning at around singularities.

• Journal of Korean Society for Quality Management
• /
• v.43 no.1
• /
• pp.57-66
• /
• 2015

Purpose: The purpose of this study is to apply the constrained Bayesian estimation methodology for product quality control process and prove the effectiveness of the product management by comparing with the well-known Bayes estimator through data performance result. Methods: The Bayes and constrained Bayes estimators were produced based on the theoretical background and for confirming the effectiveness of suggested application, the deviation index was defined and calculated for the comparison. Results: The statistical analysis result shows that applying the suggested estimation methodology, that is, constrained Bayes estimator improves the effectiveness of the index with regard to reduce the error by matching the first two empirical moments. Conclusion: Considering the advanced Bayesian approaches such as constrained Bayes estimation for the product quality control process, the newly defined deviation index reduces the error for estimating the parameter histogram which is reflected both location and deviation parameters and furthermore various Bayesian perspective approaches seems to be meaningful for managing the product quality control process.