• 지질공학
• /
• 제23권4호
• /
• pp.503-510
• /
• 2013

전단파 속도는 그 자체로 지층의 구조적인 특성을 확인할 수 있으며 상관관계 식들을 활용하면 타 공학적인 지표로 도출할 수 있다. 본 연구에서는 전단파 속도의 활용성에 발맞춰 부산 점토의 전단파 속도 관련 계수를 산정하는 것이다. 계수를 산정하기 위하여 실내 실험이 수행되었다. 실내 실험은 10 m, 12 m, 15 m, 20 m, 22 m, 25 m, 30 m 그리고 31 m에서 채취한 시료를 활용하였으며 압밀실험으로 유효응력과 전단파 속도 간의 관계를 도출하였다. 그 관계는 선행적으로 제시된 연구와 유사하게 비선형적인 특성을 보여주었으며 최종적으로는 전단파 속도에 활용 가능한 계수 값들을 도출하였다. 도출된 상수 값은 일정한 범위내에 속하는 것으로 나타났으며 두 상수 간의 관계도 제시하였다. 본 연구에서 제시한 계수 값들은 부산 점토의 참고 값이 될 것으로 판단되며, 향후 전단파 속도를 이용하여 공학적인 지표 전환시 다양하게 활용 될 것으로 판단된다.

• 한국전기전자재료학회논문지
• /
• 제22권11호
• /
• pp.949-955
• /
• 2009

In this study, we investigated the effects of Cr dopant (1.0 at% $Cr_2O_3$ sintered at $1000^{\circ}C$ for 1 h in air) on the bulk trap (i.e. defect) and interface state levels of ZnO using dielectric functions ($Z^*$, $M^*$, $Y^*$, $\varepsilon^*$, and $tan{\delta}$), admittance spectroscopy (AS), and impedance-modulus spectroscopy (IS & MS). For the identification of the bulk trap levels, we examine the zero-biased admittance spectroscopy and dielectric functions as a function of frequency and temperature. Impedance and electric modulus spectroscopy is a powerful technique to characterize grain boundaries of electronic ceramic materials as well. As a result, three kinds of bulk defect trap levels were found below the conduction band edge of ZnO in 1.0 at% Cr-doped ZnO (Cr-ZnO) as 0.11 eV, 0.21 eV, and 0.31 eV. The overlapped defect levels ($Zn^{..}_i$ and $V^{\cdot}_0$) in admittance spectra were successfully separated by the combination of dielectric function such as $M^*$, $\varepsilon^*$, and $tan{\delta}$. In Cr-ZnO, the interfacial state level was about 1.17 eV by IS and MS. Also we measured the resistance ($R_{gb}$) and capacitance ($C_{gb}$) of grain boundaries with temperature using impedance-modulus spectroscopy. It have discussed about the stability and homogeneity of grain boundaries using distribution parameter ($\alpha$) simulated with the Z"-logf plots with temperature.

• 한국학교수학회논문집
• /
• 제9권3호
• /
• pp.405-424
• /
• 2006

본 연구는 수학 영재의 행동특성 검사 도구를 개발하는데 목적이 있다. 연구는 문헌 연구를 통해 수학 영재의 행동 특성을 추출하여 유목화한 후 측정변인으로 규정하였으며, 각각의 측정변인별로 문항을 개발하여 예비검사 과정을 통하여 최종적으로 51개 문항으로 구성된 검사 도구를 개발하였다. 기존에 영재교육을 받은 학생과 표준화된 수학 창의적 문제해결력에서 상의 10%와 교사 지명 학생 포함하여 424명을 연구 대상으로 본 검사를 실시하였다. 검사도구의 신뢰도와 타당도를 검증한 결과 높은 신뢰도(.95)를 확보하였으며 Rash 1모수 모형을 이용하여 내적 타당도를 검증하였다. 주성분 요인추출방법으로 요인을 추출하여 Varimax 방법으로 직각회전을 한 구인타당도 검증에서 일반적인 수학정신 능력 요인, 수학적 능력 요인, 정보 수집과 처리 능력 요인과 수학적 성향 요인이 추출되었다 따라서 본 연구에서 개발한 수학 영재 행동 특성 검사 도구는 신뢰도와 타당도가 양호하게 검증되었다고 볼 수 있다.

• Environmental Analysis Health and Toxicology
• /
• 제24권3호
• /
• pp.203-211
• /
• 2009

A lesser degree of research is available with respect to indoor radon characteristics associated with occupants' exposure. The present study evaluated the radon levels in several public-access buildings or underground facilities, and their temporal variation in underground facilities. Radon measurements were conducted in 2005 and 2006, utilizing a continuous radon detector. A solid alpha detector (RAD7) was utilized to measure indoor radon levels. The mean radon concentrations obtained from the building or facilities were in a descending order: platforms of Daegu subway line 2, 2005 (32 $Bq/m^3$), hot-air bathroom (14 $Bq/m^3$), basement of office building (14 $Bq/m^3$), underground parking garage (14 $Bq/m^3$), underground shop (12 $Bq/m^3$), nursery (10 $Bq/m^3$), platforms of Daegu subway line 2, 2006 (9.0 $Bq/m^3$), platforms of Daegu subway line 1, 2006 (8.9 $Bq/m^3$), supermarket (7.9 $Bq/m^3$), hospital (7.3 $Bq/m^3$), and second-floor of office building (5.7 $Bq/m^3$). In general, underground-level facilities exhibited higher radon levels as compared with ground-level facilities. It was suggested that ventilation is an important parameter regarding the indoor levels of a subway. There was a decreasing or increasing trend in hourly-radon levels in a subway, whereas no trend were observed in a basement of office building. In addition, the radon levels in the subway lines 1 and 2 varied according to the platforms. The radon levels in the present study were much lower than those of previous studies. The average annual effective dose (AED) of radiation from indoor radon exposure was estimated to be between 0.043 and 0.242 mSv/yr, depending on facility types. These AEDs were substantially lower than the worldwide average AED (2.4 mSv/yr).

• Journal of Biosystems Engineering
• /
• 제14권2호
• /
• pp.67-79
• /
• 1989

This study was conducted to investigate the applicability of true model theory for pull prediction in a powered lugged wheel-soil system and to examine the possibility of using principles of similitude in investigating the dimensions of soil parameters pertinent to a powered lugged wheel-soil system concerning the pull prediction. The following conclusions were derived from the study; 1) The pull of prototype wheels proved to be predicted by those of the model wheels for the range of the dynamic weight tested. The pull curves of models and prototype were respectively very similar in the shape. From this basic knowledge, it was enabled to apply the similitude theory to the performance prediction of the true model. 2) A conditional equation which can be used for the prediction of pull of prototype by model test was derived as follows. $n_f=n_1^{-b}$ where $n_f$ : force scale = $w/w_m$ $n_1$ : length scale = ${\ell}/{\ell}_m$ b : exponent on the length dimension of the soil property ${\alpha}$ The range of the numerical value of b, which was determined by the least square method, was found to be -2.0~-2.6. 3) Considering a relatively wide variation of b values in the pull prediction, b is considered to be a function of many variales. Thus it was concluded that there are several soil properties which are pertinent to the powered lugged-wheel-soil system concerning the pull prediction, and these soil properties may have the different effects on the pull of model and protytype wheels, to give the different dimension on the soil parameters.

• 한국자동차공학회논문집
• /
• 제15권5호
• /
• pp.118-124
• /
• 2007

The efficiency of the hybrid systems which are composed of compound planetary gear sets depend on the amount of the recirculating energy among the motors and battery. This paper studies the analysis of the system efficiency with the parameters, ${\alpha},\;{\beta},\;{\gamma_a},\;{\gamma_b}$ and $\gamma_s$. The efficiency of the systems and the relative torque, speed and power of the power resources are represented by these parameters. The recuperating parameter $\kappa$ which makes the systems generalized is introduced, so the efficiencies of the modes such as the hybrid mode, the engine mode, the motoring mode and the recuperating mode are analyzed with simple equations. The tendency of the system efficiency according to the variations of the $\gamma_s$ and $\kappa$ are studied, by which it can be possible to reduce the loss of the power because the strategies for avoiding the singular speed ratio $\gamma_s$ are helpful for the system efficiency and specific value of $\kappa$ can increase the efficiency of the systems.

• Ocean and Polar Research
• /
• 제37권3호
• /
• pp.201-209
• /
• 2015

To examine the effects of increased $CO_2$ concentration and seawater temperature on the photosynthesis and growth of forest forming Ecklonia cava (Laminariales, Phaeophyta), sporophytic discs and gametophytes were cultured under three $pCO_2$ concentrations (380, 750, 1000 ppm), four temperatures (5, 10, 15, $20^{\circ}C$ for sporophytes; 10, 15, 20, $25^{\circ}C$ for gametophytes), and two irradiance levels (40, $80{\mu}mol$ photons $m^{-2}s^{-1}$) for 5 days. Photosynthetic parameter values ($ETR_{max}$, $E_k$, and ${\alpha}$) were generally higher as sporophytic discs were grown under low temperature and increased $CO_2$ concentration at 750 ppm. However, photosynthesis of Ecklonia sporophytes was severely inhibited under a combination of high temperature ($20^{\circ}C$) and 1000 ppm $CO_2$ concentration at the two photon irradiance levels. The growth of gametophytes was maximal at the combination of 380 ppm (present seawater $CO_2$ concentration) and $25^{\circ}C$. Minimal growth of gametophytes occurred at enriched $pCO_2$ concentration levels (750, 1000 ppm) and high temperature of $25^{\circ}C$. The present results imply that climate change which is increasing seawater temperature and $pCO_2$ concentration might diminish Ecklonia cava kelp beds because of a reduction in recruitments caused by the growth inhibition of gametophytes at high $pCO_2$ concentration. In addition, the effects of increased temperature and $pCO_2$ concentration were different between generations - revealing an enhancement in the photosynthesis of sporophytes and a reduction in the growth of gametophytes.

• 한국응용과학기술학회지
• /
• 제17권1호
• /
• pp.55-61
• /
• 2000

$Zn_{x}Fe_{3-x}O_{4}(0.00.<X<0.08)$ was synthesized by air oxidation method for the decomposition of carbon dioxide. We investigated the characteristics of catalyst, the form of methane by gas chromatograph after decomposition of carbon dioxide and kinetic parameter. $Zn_{x}Fe_{3-x}O_{4}(0.00.<X<0.08)$ was spinel type structure. The surface areas of catalysts($Zn_{x{Fe_{3-x}O_{4}(0.00.<X<0.08)$) were $15{\sim}27$ $m^{2}/g$. The shape of $Zn_{0.003}Fe_{2.997}O_{4}$ was sphere. The optimum temperature for the decomposition of carbon dioxide into carbon was $350^{\circ}C$. $Zn_{0.003}Fe_{2.997}O_{4}$ showed the 85% decomposition rate of carbon dioxide and the degree of reduction by hydrogen(${\delta}$) of $Zn_{0.003}Fe_{2.997}O_{4}$ was 0.32. At $350^{\circ}C$, the reaction rate constant and activation energy of $Zn_{0.003}Fe_{2.997}O_{3.68}$ for the decomposition of carbon dioxide into carbon were 3.10 $psi^{1-{\alpha}}/min$ and 0.98 kcal/mole respectively. After the carbon dioxide was decomposed, the carbon which was absorbed on the catalyst surface was reacted with hydrogen and it became methane.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.2270-2275
• /
• 2008

수문학적 하도추적법의 하나인 Muskingum 모형은 미 육군공병단(U.S. Army Corps of Engineers)에 의해서 미국 Ohio 주의 Muskingum 유역에 홍수조절계획으로 처음 사용되었으며 모형의 구조 및 입력자료의 단순성에 비하여 비교적 우수한 결과를 모의할 수 있는 것으로 알려져 있다. 1938년 McCarthy에 의해서 개발되었고 구간내 총저류량은 prism 저류와 wedge 저류로 구분하여 prism 저류는 유출량에 wedge 저류는 유입량과 유출량의 차에 직접 비례한다는 가정하에 추적식을 개발하였다. 이후 지속적인 연구가 이뤄져 1985년 O'Donnel은 측방유입량(lateral inflow)을 상류단의 유입량에 비례하는 형태로 3-매개변수 muskingum 모형을 제안하여 추적계수의 결정을 선형대수(linear algebra)에서 동차(homogeneous)연립방정식 해를 구하는 Cramer 법칙인 matrix 기법을 적용하였다. 본 연구에서는 홍수사상으로부터 측방유입량이 고려되고 추적계수 결정에 있어서 직접 계산이 가능한 O'Donnel(1985)이 제안한 3-매개변수 muskingum 모형을 적용하였다. 추적계수들의 결정은 직접 matrix 기법을 적용하였고 적용대상은 낙동강 유역의 낙동 지점을 상류단으로 구미 지점을 하류단으로 선정하였다. 홍수사상은 낙동강 유량측정 조사사업 2005년${\sim}$2007년 보고서에 수록된 수문자료를 선정하여 관측치와 계산치를 비교하였고 홍수사상에 적용하여 수문곡선을 추정하였으며, 각각의 매개변수가 추적구간에 어떠한 영향을 미치는지 변수간의 관계를 분석하였다. 또한, 관측치와 계산치의 적합도 검증은 평균제곱근오차(root mean squar error; RMSE)와 모형 효율성 계수(model efficiency; ME)를 산정하여 분석하였으며, 하도 구간내 저류량은 대상구간에 대한 유입량과 유출량의 가중합에 비례한다는 선형모형을 적용하였다.

• The Journal of Advanced Prosthodontics
• /
• 제7권5호
• /
• pp.400-405
• /
• 2015

PURPOSE. The purpose of this study is to mix dental ceramic powder in varying ratios and evaluate the effect of the mixing ratio on color and translucency. MATERIALS AND METHODS. The ceramic powder of shade A3 of the same product was mixed with the shade A2 of three products: IPS e.max Ceram (Ivoclar Vivadent, Schaan, Liechtenstein), Vintage Halo (SHOFU Inc., Kyoto, Japan), and Ceramco 3 (Ceramco-Dentsply, Burlington, NJ, USA) in the following fixed ratios (0 wt%, 25 wt%, 50 wt%, 75 wt%, and 100 wt%) and then fired. A total of 150 specimen of ceramic fired were manufactured in a regular size (W: 8.5 mm, L: 10.5 mm, and H: 1.5 mm). For color and translucency, $L^*$, $a^*$, and $b^*$ were measured and Two-way analysis of variance (ANOVA) and One-way analysis of variance (ANOVA) were used for data analysis (${\alpha}$=0.05). RESULTS. The higher the mixing ratio was, $L^*$, $a^*$, and $b^*$ of IPS e.max Ceram were all increased, and $L^*$ of Vintage Halo was reduced and $a^*$ and $b^*$ were increased. $L^*$ and $a^*$ of Ceramco3 were reduced and $b^*$ of Ceramco3 was increased. Color difference (${\Delta}E^*ab$) was increased in all three products as the mixing ratio got higher. Increased mixing ratios resulted in decreased translucency parameter (TP) values for IPS e.max Ceram but increased TP values for Vintage Halo and Ceramco3. CONCLUSION. In this limited study, CIE $L^*$, $a^*$, and $b^*$ were influenced by the mixing ratio of the A3 powders and porcelain powder mixtures represented a various color and translucency.