• Economic and Environmental Geology
• /
• v.48 no.5
• /
• pp.409-420
• /
• 2015

The Sangdae-ri riverside around Musimcheon stream, flowing through Gadeok-myon of Cheongju City, is one of the representative strawberry fields employing water curtain cultivation (WCC) in Korea. In this area, annual groundwater use for WCC has been calculated by a few methods. On the assumption that all the water flowing through the final ditch may be mostly composed of groundwater, the discharge rate in it can be used as a good proxy for assessing the groundwater use. However, in the study area, the final ditch was set up in an unpaved state near and parallel to Musimcheon stream. Under such circumstances, the drainwater is likely to be influenced by infiltration and/or inflow of nearby stream. Hence, we examined whether or not stream water has influenced water flowing out through the final ditch in respect of ion concentrations or field parameters such as T, pH and electrical conductivity (EC) values. The period of measuring field parameters and sample collection was from February 2012 through February 2015. The drainwater in the final ditch did not show the average quality of groundwater, but similar quality of stream water in respect of pH, EC, ion contents and water type. From this, it is suggested that measuring the flow rate of the final ditch should not be directly used for assessing groundwater use in the study area. In addition, because of its sensitivity to ambient temperature, water temperature proved not to be appropriate for estimating the interaction between ditch and stream. For accuracy, additional methods will be needed to calculate mixing ratios between stream and ground water within drainage system.

• Journal of Korean Medicine Rehabilitation
• /
• v.19 no.2
• /
• pp.125-156
• /
• 2009

Objectives : To research the trend of studies related to rheumatoid arthritis and to indicate the hereafter direction for its study in oriental medicine and its treatment. Methods : I reviewed 75 domestic oriental medical journals, and 50 medical journals about rheumatoid arthritis published after 2004, and comparative analysis was made. And these theses were classified by college, year, field of study, subject. Results : The following are the results of this study. 1. Classified by oriental medical college, Dae-jeon college published the most theses, followed by Dong-guk, Kyung-hee, Se-myung and Dong-shin college. Han-yang college published the most theses among college of medicine. 2. Classified by type of thesis, experimental theses(70 pieces, 94%) showed higher rate than that of clinical theses(4 pieces, 5%) in oriental medical studies. However, in medical studies, clinical theses(34 pieces, 68%) showed higher rate than that of experimental theses(15 pieces, 30%). 3. Analyzed by subject, the most dealt subject in oriental medicine was herb medication, followed by herbal acupuncture, single herb, electroacupuncture, sasang & gene, acupuncture & moxibustion, complex accordingly. The most dealt subject in medical clinical journals was standards of diagnosis & prognosis, followed by medication, gene analysis, pathogenesis, clinical pattern, operative treatment and complication accordingly. 4. In theses related to herb medication, most of the subject was to evaluate anti-inflammatory and immunoregulatory effects of herb medication with geopungseup, jibitong, hwalhyeolgeoer function. The tendency of experimental methods was focusing on understanding anti-inflammatory and immunoregulatory mechanisms through molecular biologic methods by analyzing cytokine and gene. 5. Most of theses related to herbal acupuncture were experimental studies verifying ant-inflammatory and immnoregulatory effects through methods observing change of cytokine and immunoregulatory factors. Regarding remedies for herbal acupuncture, Ulmus davidiana Planch was most preferred, followed by bee venom. 6. In theses related to single herb, Boik-yak was most prefered, followed by Geopungseup-yak and Hwalhyeolgeoer-yak. Regarding methods of research, there were tendency of shifting from methods verifying travail, anti-inflammatory and anti-pyretic effects through a test of behavior, morphometry, serology and temperature measurement of the rectum and the skin into verifying anti-inflammatory and immunoregulatory effects through observing inflammatory cytokine in the joint and cells of spleen. 7. In theses related to electroacupuncture, ST36 and adjuvant were most preferred as acupoints and induced factor. The tendency of experimental methods was turning from verifying mechanism of travail effect to analyzing inflammation and pain inducing factors. 8. Diverse medical clinical studies were published. Subjects such as diagnosis and prognosis, medication, gene analysis, clinical pattern, operational treatment, complication and pathogenesis were published. Especially, studies about standards of early diagnosis, and research on possible parallel medications with methotrexate were actively inquired. 9. Most of theses related to medical experimental studies was about mediators and receptors related to inflammatory induction and osteoclasia mechanism. Also, it was presented blockage of them can be effective on rheumatoid arthritis. Conclusions : The oriental medicine studies have merit in its diversity of treatment, but it clinical studies is lacking compared to experimental studies. Also, more diversity of subjects is necessary. Therefore, complementary measures are needed. Hereafter, oriental medicine research about rheumatoid arthritis needs more clinical research verifying the effectiveness and safety in clinical field. Also, we require oriental medical standard of diagnosis and researches on pathological generation which would make early checkup and prognosis possible.

• Korean Journal of Plant Taxonomy
• /
• v.34 no.2
• /
• pp.97-118
• /
• 2004

A comparative anatomical and ultrastructural study was undertaken to investigare on the leaf epidermis by light microscopy (LM) and scanning electron microscopy (SEM). On the basis of results from this study, it was grasped major characters of taxa and variation range of each character on the level of species, section and subgenus respectively. The shape of leaf epidermal cell was oblong to linear, which was varied by each taxon. Epidermal cell of taxa in sects. Microscordum, Anguinum, and Rhizirideum, which had wide leaf blade, oblong instead of linear shape in others examined taxa in this study. The leaf of taxa in sect. Anguinum was hypostomatic, while the rest of taxa had amphistomatic leaf. This was also one of characters which could discriminate taxa of sect. Anguinum from others. The guard cell in investigated taxa had not so much variation in the respect of its size. The number of stomata per unit area reduced by increasing size of epidermal cell, the fewest number of stomata per unit area was found in the taxa of sect. Anguinum. The type of stomatal apparatus of observed all taxa was anomocytic. It was found to know ultrastructural variation in the epidermal cell, like as patterns of sculpture on the cell wall, and features of deposition of wax by SEM. There were no depositions of wax in the taxa of sect. Microscordum and Anguinum, but fine thread-like structures which were parallel or cross to axis was found on the surface of epidermal cell respectively. The patterns of sculpture on the cell were prominent straight in sects. Recticulato-bulbosa and Rhizirideum, discontinuous line in the sect. Oreiprason. The epicuticular wax had been deposited on the surface of its epidermal cell in all taxa except sects. Microscordum and Anguinum.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.6
• /
• pp.162-176
• /
• 2016

The experience and play activities in forest spaces have played an effective role in children's growth and development, therefore, many studies and projects related to forest activity space have progressed actively. However, the focus of previous research has been merely on the effectiveness of forest activity but little on providing the basis for the spatial design of these types of forest activity spaces. Thus, this study aims to identify the relationship between children's developmental play activity and the physical characteristics of forest activity spaces for evidence-based design. First of all, indicators for Cognitive-Social play(CSP) was selected and forest spaces were categorize into play facility spaces and forest spaces. More detailed environmental characteristics of each space were 'play area' and 'paving materials' for play facilities and 'density of tree and shrub', 'slope', 'paving materials' and 'fixing and type of natural loose parts' for forest space. Through environmental inventory and behavior observation, the types of play behaviors and the occurrence frequency of children aged four to five were collected and analyzed. The results were as follows: 1) In play facility spaces, play behaviors occurred at a high frequency at the facility playground with play facilities and sand area. In terms of CSP, functional-solitary and functional-parallel plays occurred predominantly. 2) In forest spaces, various play behaviors occurred at high frequency in the environment with low density planting and various natural loose parts. For CSP, functional-group and symbolic-group plays occurred at a high frequency. 3) Symbolic-group play appeared to be highly affected by environmental characteristics like tree area of scatter density or less, 10~20 degree slope, and the presence of fixed large stumps. In conclusion, this study provides standards of physical environmental characteristics for forest activity space design through direct observation and analysis of children's play behaviors.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.11
• /
• pp.1492-1498
• /
• 2009

In the dermis, fibroblast plays an important role in the turnover of the dermal extracellular matrix. Collagen I and III, which are the most important dermal proteins of the extracellular matrix, function as a stabilizing scaffold of dermal connective tissues, as well as a regulator of differentiation and migration of dermal cells. In this study, we investigated the effect of various nutrients, such as ascorbic acid, silicon, Fe, lysine and proline which function as cofactors or building blocks on collagen synthesis. When the physiological concentrations of ascorbic acid (0-100 ${\mu}M$), silicon (0-50 ${\mu}M$), Fe (0-50 ${\mu}M$), lysine (0-150 ${\mu}M$) and proline (0-300 ${\mu}M$) were treated at HS27 for either 3 or 5 days, 5 day treatment of ascorbic acid at the low concentration (5-10 ${\mu}M$) increased the expression of collagen I and III protein by 115-1300% without increasing cell proliferation. 3 or 5 days treatment of Fe increased the expression of collagen I and III proteins up to 323% in parallel with cell proliferation by 164%. However, cell proliferation and expression of collagen I and III protein in silicon treated HS27 did not differ. Proline and lysine only increased cell proliferation up to 247.9%. Taken together, we demonstrate that the physiological concentrations of ascorbic acid and Fe enhance the expression of collagen I and III protein for treatment of 3 or 5 days.

• Economic and Environmental Geology
• /
• v.47 no.6
• /
• pp.571-588
• /
• 2014

It consists of the Precambrian Jirisan metamorphic complex and Sancheong anorthosite complex and the Mesozoic granitoids which intrude them in the Sancheong area, the Jirisan province of Yeongnam massif, Korea. The study area is located in the western part of the stock-type Sancheong anorthosite complex. We performed a detailed fieldwork on the Sancheong anorthosite (SA) and Fe-Ti ore body (FTO) which constitute the Sancheong anorthosite complex, and reinterpreted the origin of FTO foliation and the genetic relationship between them from the foliations, shear zones, occurrences of the SA and FTO. The new structural characteristics between them are as follows: the multilayer structures of FTO, the derived veins of straight, anastomosing uneven types and block structures related to the size reduction of SA, the gradual or irregular boundaries of SA blocks and FTO showing bulbous lobate margins and comb structures, the FTO foliation and linear arrangements of flow occurrence which is not ductile shear deformation, the discontinuous shear zone of SA, the orientation of FTO foliations parallel to the boundaries of SA blocks, the predominance of FTO foliations toward the boundaries of SA blocks and being proportional to the aspect ratio of plagioclase xenocrysts and SA xenoblocks, and the flow folding structures of FTO foliation. Such field evidences indicate that the SA is not fully congealed when the FTO is melt and the fracturing of partly congealed SA causes the derived veins of FTO and the size reduction of SA. Also the gradual or irregular boundaries of SA blocks and FTO result from the mutual reaction between the not fully congealed SA blocks and the FTO melt, and the FTO foliation is a magmatic foliation which was formed by the interaction between the FTO melt and the partly congealed SA blocks. Therefore, these suggest that the SA and FTO are not formed from the intrusion of different magmas in genesis and age but from a coeval and cogenetic magma through multiple fractionation. We predict that the FTO will show an very irregular occurrence injected along irregular fractures, not the regular occurrence like as the intrusive vein and dike. It can be applied to the designing of Fe-Ti mineral resource exploration in this area.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.324-332
• /
• 2009

The purpose of this study was to investigate the effect of rigidity of post core systems on stress distribution by the theoretical technique, finite element stress-analysis method. Three-dimensional finite element models simulating an endodontically treated maxillary central incisor restored with a zirconia ceramic crown were prepared and 1.5 mm ferrule height was provided. Each model contained cortical bone, trabecular bone, periodontal ligament, 4 mm apical root canal filling, and post-and-core. Six combinations of three parallel type post (zirconia ceramic, glass fiber, and stainless steel) and two core (Paracore and Tetric ceram) materials were evaluated, respectively. A 50 N static occlusal load was applied to the palatal surface of the crown with a $60^{\circ}$angle to the long axis of the tooth. The differences in stress transfer characteristics of the models were analyzed. von Mises stresses were chosen for presentation of results and maximum displacement and hydrostatic pressure were also calculated. An increase of the elastic modulus of the post material increased the stress, but shifted the maximum stress location from the dentin surface to the post material. Buccal side of cervical region (junction of core and crown) of the glass fiber post restored tooth was subjected to the highest stress concentration. Maximum von Mises stress in the remaining radicular tooth structure for low elastic modulus resin core (29.21 MPa) was slightly higher than that for high elastic modulus resin core (29.14 MPa) in case of glass fiber post. Maximum displacement of glass fiber post restored tooth was higher than that of zirconia ceramic or stainless steel post restored tooth.

• The Journal of the Petrological Society of Korea
• /
• v.28 no.1
• /
• pp.25-38
• /
• 2019

The Muju-Seolcheon area, which is known to be located in the boundary of Ogcheon Belt and Ryeongnam Massif (OB-RM), consists of age unknown or Precambrian metamorphic rocks (MRs) [banded biotite gneiss, metasedimentary rocks (black phyllite, mica schist, crystalline limestone, quartzite), granitic gneiss, hornblendite], Mesozoic sedimentary and igneous rocks. In this paper are researched the structural characteristics of each deformation phase from the geometric and kinematic features and the developing sequence of multi-deformed rock structures of the MRs, and is considered the boundary location of OB-RM with the previous geochemical, radiometric, structure geological data. The geological structure of this area is at least formed through four phases (Dn-1, Dn, Dn+1, Dn+2) of deformation. The Dn-1 is the deformation which took place before the formation of Sn regional foliation and formed Sn-1 foliation folded by Fn fold. The Dn is that which formed the Sn regional foliation. The predominant Sn foliation shows a NE direction which matches the zonal distribution of MRs. A-type or sheath folds, in which the Fn fold axis is parallel to the direction of stretching lineation, are often observed in the crystalline limestone. The Dn+1 deformation, which folded the Sn foliation, took place under compression of NNW~NS direction and formed Fn+1 fold of ENE~EW trend. The Sn foliation is mainly rearranged by Fn+1 folding, and the ${\pi}$-axis of Sn foliation, which is dispersed, shows the nearly same direction as the predominant Fn+1 fold axis. The Dn+2 deformation, which folded the Sn and Sn+1 foliations, took place under compression of E-W direction, and formed open folds of N-S trend. And the four phases of deformation are recognized in all domains of the OB-RM, and the structural characteristics and differences to divide these tectonic provinces can not be observed in this area. According to the previous geochemical and radiometric data, the formation or metamorphic ages of the MRs in and around this area were Middle~Late Paleproterozoic. It suggests that the crystalline limestone was at least deposited before Middle Paleproterozoic. This deposition age is different in the geologic age of Ogcheon Supergroup which was recently reported as Neoproterozoic~Late Paleozoic. Therefore, the division of OB-RM tectonic provinces in this area, which regards the metasedimentary rocks containing crystalline limestone as age unknown Ogcheon Group, is in need of reconsideration.

• The Journal of Engineering Geology
• /
• v.32 no.1
• /
• pp.113-126
• /
• 2022

The tectonic history of the Chukchi Abyssal Plain in the Amerasia Basin, Arctic Ocean, has not been fully explored due to the harsh conditions of sea ice preventing detailed observation. Existing models of the tectonic history of the region provide contrasting interpretation of the timing of formation of the crust (Mesozoic to Cenozoic), crust type (from hyper-extended continental crust to oceanic crust), and formation process (from parallel/fan-shaped rifting to transformation faulting). To help determine the age of the oceanic crust, the geothermal gradient was measured at three stations in the south of abyssal plain at depth of 2,160-2,250 m below sea level. Heat flow measurement stations were located perpendicular to the spreading axis over a 40 km-long transect. In-situ thermal conductivity measurement, corrected by the laboratory test, gave observed marine heat flows of 55 to 61 mW/m². All measurements were taken during Arctic expeditions in 2018 (ARA09C expedition) and 2021 (ARA12C expedition) by the Korean ice-breaking research vessel (IBRV) Araon. Given the assumption of oceanic crust, the results correspond to formation in the Late Cretaceous (Mesozoic). The inferred age supports the hypothesis of formation activated by the opening of the Makarov Basin during the Late Mesozoic-Cenozoic. This would make it contemporaneous with rifting of the Chukchi Border Land immediately east of the abyssal plain. The heat flow data indicate the base of the gas hydrate stability zone is located 332-367 m below the seafloor, this will help to identify the gas hydrate-related bottom simulating reflector in the future seismic survey, as already identified on the Chukchi Plateau. Further geophysical surveys, including heat flow measurements, are required to increase our understanding of the formation process and thermal mantle structure of the abyssal plain.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.57-65
• /
• 2019

Purpose: The purpose is to clarify the effect of additional scattering ratio on the edge of the block according to the increasing block thickness with low melting point lead alloy and pure lead in electron beam therapy. Methods and materials: $10{\times}10cm^2$ Shielding blocks made of low melting point lead alloy and pure lead were fabricated to shield mold frame half of applicator. Block thickness was 3, 5, 10, 15, 20 (mm) for each material. The common irradiation conditions were set at 6 MeV energy, 300 MU / Min dose rate, gantry angle of $0^{\circ}$, and dose of 100 MU. The relative scattering ratio with increasing block thickness was measured with a parallel plate type ion chamber(Exradin P11) and phantom(RW3) by varying the position of the shielding block(cone and on the phantom), the position of the measuring point(surface ans depth of $D_{max}$), and the block material(lead alloy and pure lead). Results : When (depth of measurement / block position / block material) was (surface / applicator / pure lead), the relative value(scattering ratio) was 15.33 nC(+0.33 %), 15.28 nC(0 %), 15.08 nC(-1.31 %), 15.05 nC(-1.51 %), 15.07 nC(-1.37 %) as the block thickness increased in order of 3, 5, 10, 15, 20 (mm) respectively. When it was (surface / applicator / alloy lead), the relative value(scattering ratio) was 15.19 nC(-0.59 %), 15.25 nC(-0.20 %), 15.15 nC(-0.85 %), 14.96 nC(-2.09 %), 15.15 nC(-0.85 %) respectively. When it was (surface / phantom / pure lead), the relative value(scattering ratio) was 15.62 nC(+2.23 %), 15.59 nC(+2.03 %), 15.53 nC(+1.67 %), 15.48 nC(+1.31 %), 15.34 nC(+0.39 %) respectively. When it was (surface / phantom / alloy lead), the relative value(scattering ratio) was 15.56 nC(+1.83 %), 15.55 nC(+1.77 %), 15.51 nC(+1.51 %), 15.42 nC(+0.92 %), 15.39 nC(+0.72 %) respectively. When it was (depth of $D_{max}$ / applicator / pure lead), the relative value(scattering ratio) was 16.70 nC(-10.87 %), 16.84 nC(-10.12 %), 16.72 nC(-10.78 %), 16.88 nC(-9.93 %), 16.90 nC(-9.82 %) respectively. When it was (depth of $D_{max}$ / applicator / alloy lead), the relative value(scattering ratio) was 16.83 nC(-10.19 %), 17.12 nC(-8.64 %), 16.89 nC(-9.87 %), 16.77 nC(-10.51 %), 16.52 nC(-11.85 %) respectively. When it was (depth of $D_{max}$ / phantom / pure lead), the relative value(scattering ratio) was 17.41 nC(-7.10 %), 17.45 nC(-6.88 %), 17.34 nC(-7.47 %), 17.42 nC(-7.04 %), 17.25 nC(-7.95 %) respectively. When it was (depth of $D_{max}$ / phantom / alloy lead), the relative value(scattering ratio) was 17.45 nC(-6.88 %), 17.44 nC(-6.94 %), 17.47 nC(-6.78 %), 17.43 nC(-6.99 %), 17.35 nC(-7.42 %) respectively. Conclusions: When performing electron therapy using a shielding block, the block position should be inserted applicator rather than the patient's body surface. The block thickness should be made to the minimum appropriate shielding thickness of each corresponding using energy. Also it is useful that the treatment should be performed considering the influence of scattering dose varying with distance from the edge of block.