• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.6
• /
• pp.1017-1025
• /
• 2004

Generally generator is connected to the bus with no load. After the connection to the bus. the frequency of generator system with no load has to be increased for preventing the reverse power. But in a few case of parallel running with infinite bus system, we have to synchronize the loaded generator to the infinite bus. The frequency of generator system with load has to be lowered for prevention of load shift to the bus system. The blackout of infinite bus decreases the parallel running generator's frequency because of load increasing. In this paper we propose a method that the generator with load maintains the frequency constantly after the blackout of infinite bus. With the constant speed control and load control method of parallel running system to the infinite bus we apply the method to the industrial generating system.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.5
• /
• pp.564-581
• /
• 2016

We present an efficient hardware prime generator that generates a prime p by combining trial division and Fermat test in parallel. Since the execution time of this parallel combination is greatly influenced by the number k of the smallest odd primes used in the trial division, it is important to determine the optimal k to create the fastest parallel combination. We present probabilistic analysis to determine the optimal k and to estimate the expected running time for the parallel combination. Our analysis is conducted in two stages. First, we roughly narrow the range of optimal k by using the expected values for the random variables used in the analysis. Second, we precisely determine the optimal k by using the exact probability distribution of the random variables. Our experiments show that the optimal k and the expected running time determined by our analysis are precise and accurate. Furthermore, we generalize our analysis and propose a guideline for a designer of a hardware prime generator to determine the optimal k by simply calculating the ratio of M to D, where M and D are the measured running times of a modular multiplication and an integer division, respectively.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.2
• /
• pp.75-81
• /
• 2021

This study analyzes the resonance characteristics caused by the mutual interference between LCL filters and the grid impedance under the parallel operation of the grid-connected inverter using the LCL filter. These characteristics are verified through simulation and experiment. Two inverters are used to connect to the grid in parallel, and the system parameters, including the LCL filter, are set to the same conditions. In the case of inverters running in parallel at the point of common coupling, the presence of grid impedance causes mutual interference between the LCL filters of each inverter, and the deviation of the filter resonance frequency is analyzed to understand the parallel inverter. The correlation between the number of devices and the size of grid impedance is simulated by PSIM and verified by MATLAB. By connecting the real-time digital simulator Typhoon HILS to the DSP 28377 control board, the mutual interference characteristics are tested under the condition of two inverters running in parallel. The experimental and analysis results are the same, indicating the validity of the analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.3
• /
• pp.346-351
• /
• 1999

This paper is a research for removing the hunting which came about during the parallel running of the alternators which four-pole six-phase have the converter with twelve diodes to rectify all the waves. Druing the parallel running the hunting came about under the period of 0.2-0.3{sec} not when it's load was the resistance but the capacity at the rpm band 1575[rpm] 1690[rpm] This hunting in our judgement was not come about from the general hunting causes which have been already known to but the special example. And so we checked that the hunting came about or not as per the changes of the rpm exciting current load current and converter and converter output voltage and the following facts were revealed. -The hunting occured during the constant voltage charging where r. p. m band is from 1575[rpm] to 1690[rpm] - The hunting did not came about during the constant power charging in which there was the large difference between the converter output voltage and the battery voltage. -The hunting did not came about in the low rpm band. We could see from the above facts that the existence of the hunting inducing point at the con-stant voltage charging band was the direct cause of the hunting. After trying every possible means to remove the hunting inducing point we could know that the modification of the synchronous generator is suitable for he purpos in view of the small engine room.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.282-286
• /
• 1999

This paper presents a vector control of parallel drive, a beatless control and a low switching PWM technique for the propulsion system of Electric car as transient state which are included interrupting line voltage, changing line voltage slowly, suddenly, regenerating light load and starting from backward running. Improved performance and a validation of proposed method is shown by the experimental results using a 1.65MVA IGBT VVVF inverter and inertia load equivalent to 160 tons electric cars through a running and transient state test.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11a
• /
• pp.73-78
• /
• 2003

In this research, we implement Realtime Air Diffusion Prediction System which is a parallel Fortran model running on distributed-memory parallel computers. The system is designed for air diffusion simulations with four-dimensional data assimilation. For regional air quality forecasting a series of dynamic downscaling technique is adopted using the NCAR/Penn. State MM5 model which is an atmospheric model. The realtime initial data have been provided daily from the KMA (Korean Meteorological Administration) global spectral model output. It takes huge resources of computation to get 24 hour air quality forecast with this four step dynamic downscaling (27km, 9km, 3km, and lkm). Parallel implementation of the realtime system is imperative to achieve increased throughput since the realtime system have to be performed which correct timing behavior and the sequential code requires a large amount of CPU time for typical simulations. The parallel system uses MPI (Message Passing Interface), a standard library to support high-level routines for message passing. We validate the parallel model by comparing it with the sequential model. For realtime running, we implement a cluster computer which is a distributed-memory parallel computer that links high-performance PCs with high-speed interconnection networks. We use 32 2-CPU nodes and a Myrinet network for the cluster. Since cluster computers more cost effective than conventional distributed parallel computers, we can build a dedicated realtime computer. The system also includes web based Gill (Graphic User Interface) for convenient system management and performance monitoring so that end-users can restart the system easily when the system faults. Performance of the parallel model is analyzed by comparing its execution time with the sequential model, and by calculating communication overhead and load imbalance, which are common problems in parallel processing. Performance analysis is carried out on our cluster which has 32 2-CPU nodes.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.10
• /
• pp.1023-1029
• /
• 2013

Water running animals such as basilisk lizards have an advantage of high-speed movement and high power efficiency on water; so researchers in robotic fields have been interested in the water running locomotion. This paper presents prototype-design and experimental study on the fourand six-legged water running robot. Based on the previously proposed quadruped water running robot, we assemble a hexapedal water running robot. The legs of the water running robot are designed based on four-bar parallel link for repeated motion along to pre-defined path. Stability performance of the quadruped and hexapedal water running robot are investigated by experiments on rolling criterion. As a result, hexapedal robot performs better stability than quadruped robot. Based on the hexapedal robot design, we are planning to optimize the position of legs and operating frequency.

• Journal of the Korea Society for Simulation
• /
• v.7 no.1
• /
• pp.69-83
• /
• 1998

In this paper, we present the results of simulation by running parallel VHDL simulation on typical MPP(Massively Parallel Processor) systems such as IBM SP2 and SGI Origin 2000. Parallel simulation uses the synchronous protocol and parallel program is implemented using MPI(Message Passing Interface) based on message passing model, so that it can urn on any parallel programming environment which supports MPI, a standard communication library. And then GVT(Global Virtual Time) computation for parallel simulation is based on the global broadcasting with MPI＿Bcast(), which is a standard function in MPI and piggybacking. Our benchmark exhibits that as size of VHDL grows, the parallel simulation has a better performance compared with the sequential simulation. In addition, we also show the results of comparison between IBM SP2 and SGI Origin 2000 by applying the same application to those indirectly.

• Journal of applied mathematics & informatics
• /
• v.6 no.2
• /
• pp.649-659
• /
• 1999

This paper presents a parallel implementation of stiff-ness matrix calculation based on the processor farm model on a net-work of workstations running PVM programming environment. As the computational characteristics of stiffnes matrix exhibits good po-tentials for effective prallel computation the performance improve-ment is show to be almost linear with the number of sorkstations involved in the computation.

• Journal of applied mathematics & informatics
• /
• v.41 no.6
• /
• pp.1317-1326
• /
• 2023

Today's computers, desktops and laptops were build with multi-core architecture. Developing and running serial programs in this multi-core architecture fritters away the resources and time. Parallel programming is the only solution for proper utilization of resources available in the modern computers. The major challenge in the multi-core environment is the designing of parallel algorithm and performance analysis. This paper describes the design and performance analysis of parallel algorithm by taking the Knight Tour problem as an example using OpenMP interface. Comparison has been made with performance of serial and parallel algorithm. The comparison shows that the proposed parallel algorithm achieves good performance compared to serial algorithm.