• International Journal of Automotive Technology
• /
• 제6권1호
• /
• pp.65-70
• /
• 2005

Pressure ripples, which are inevitably generated by a fluctuation of flow rate caused by a pump mechanism, include noises and vibrations in hydraulic pipeline. These noises and vibration deteriorate the stability and accuracy of hydraulic systems. The accumulator and hydraulic attenuator are normally used to reduce the pressure ripples. In this study, a parallel line is introduced to the hydraulic pipeline for the hydraulic system with a bent-axis piston pump as a method to reduce the pressure ripples. The dynamic characteristics of the hydraulic pipeline with a parallel line are analyzed by a transfer matrix in the frequency domain. The usefulness of the hydraulic pipeline with a parallel line was ascertained by experiment and simulation. The results from the experiment and simulation show that the hydraulic pipeline with a parallel line were effective in reducing the pressure ripples.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.299-302
• /
• 1997

The pressure ripples are inevitabilitily generated by a fluctuation of flow rate caused pump mechanism, which occur noises, vibrations, and affect a control performance in tluid pipeline. The method for reduction of pressure ripples has been normally used a accumulator which is installed near the pump generating the pressure ripples. This paper introduces the parallel pipeline as a method to reduce pressure ripples in tluid pipeline, and confirms the usefulness of it in reducing the pressure ripples as compared with the fluid pipeline with a accumulator using AMESim(Advanced Modeling Environment for Simulations) Software.

• 비파괴검사학회지
• /
• 제29권1호
• /
• pp.43-48
• /
• 2009

The fatigue crack growth behavior of high strength X80 pipeline steel was investigated with compact tension specimens that crack growth directions were aligned either parallel or normal to the rolling direction of the pipeline. Also, the fatigue crack growth rates for welded joint of X80 pipeline steel were investigated with compact tension specimens that crack growth directions were aligned either parallel or normal to the welding line. The experimental results indicated the fatigue crack growth behavior was markedly different in three zones, weld metal, heat affected zone and base metal of welded joints. There was a trend toward increment in the fatigue life of weld metal and heat affected zone as compared with the X80 pipeline steel.

• 상하수도학회지
• /
• 제27권1호
• /
• pp.129-138
• /
• 2013

Water interruption is often caused by a rupture in the branch-like singular pipeline. This will cause critical complaints from household and may decrease public service quality. As an alternative of singular pipeline, additional parallel pipeline could be installed for sustainable water supply. This system is called double pipeline system and able to be utilized for water transmission line between treatment plant and distribution reservoir. Construction of double pipeline was thought to increase capital cost, which can be an issue to waterworks authorities. Reducing capital cost was possible by means of installing connectors between two parallel pipelines because of reduced diameter of each pipe. To obtain optimal design condition for connectors, it was necessary to compare water pressure according to accident location, to investigate flow according to connection pipe spacing, connection pipe diameter, and aging of pipe. Reliable and economical connection layouts were determined based on these results. The cost estimation for each design condition was carried out. Cost was approximately reduced by 20 ~ 30 % compared to the double pipeline without connections. In addition to this, connection between double pipelines could expect extra benefits for maintenance since the pipe could be repaired and rehabilitated without interruption.

• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.196-208
• /
• 2017

This study presents an experimental work in a petrochemical company for scanning a buried pipeline using $Tc^{99m}$ radiotracer based on the measured velocity changes, in order to determine the flow reduction along a pipeline. In this work, $Tc^{99m}$ radiotracer was injected into the pipeline and monitored by sodium iodide scintillation detectors located at several positions along the pipeline. The flow velocity has been calculated between every two consecutive detectors along the pipeline. Practically, six experiments have been carried out using two different data acquisition systems, each of them being connected to four detectors. During the fifth experiment, a bypass was discovered between the scanned pipeline and another buried parallel pipeline connected after the injection point. The results indicate that the bypass had a bad effect on the volumetric flow rate in the scanned pipeline.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.789-792
• /
• 2005

In this paper, we propose a method that applies pipeline architecture to parallel CRC circuits. We developed a logic partitioning algorithm for applying pipeline architecture. Our algorithm can be used for the polynomial and the input data width, both of arbitrary length and minimize the logic level. Design experiments show the superiority of our approach in reducing the delay in comparison with previous works.

• 한국항해항만학회지
• /
• 제27권5호
• /
• pp.473-478
• /
• 2003

평행한 벽 사이에 원형배관(circular pipeline)을 놓고 그 주위의 유동특성에 대한 수치연구를 수행하였다. 비압축성 유체를 가지고, Navier-Stokes 방정식을 풀었고 3차 풍상(upwind) 차분의 수치해법을 이용하였다. 한쪽 벽과의 거리가 매우 작아질 때, 볼텍스 떨어짐이 상당히 억압되는데 이것은 벽 경계와의 상호 박리 작용 때문으로 간수된다. 본 연구는 레이놀드 수의 변함과 물체가 벽에 접근함에 따른 볼텍스 떨어짐의 특성을 규명하는데 있다. 원형배관 후류와 평행벽내 유기된 박리의 상호작용을 집중적으로 다루며 서로 다른 조건에서 박리와 와역한(vorticity dynamics)의 특성을 해석하였다.

• 전기전자학회논문지
• /
• 제20권1호
• /
• pp.75-81
• /
• 2016

본 논문은 SIMT(Single Instruction Multi Thread)구조 GP-GPU(General Purpose Graphic Processing Unit)에서 그래픽 어플리케이션 성능을 향상시키기 위해 타일 기반 그래픽 파이프라인 구조를 제안한다. 타일 기반 그래픽 파이프라인 구조는 병렬적으로 Rasterization 단계를 처리하고, 불필요한 그래픽 처리 연산은 수행하지 않는다. SIMT구조를 통해 대용량 데이터를 병렬로 처리하여 연산 성능을 향상시켰고, 이는 3D 그래픽 파이프라인 처리의 성능을 향상하였다. 제안하는 구조를 통해 3D 그래픽 어플리케이션을 처리할 때 3D 모델을 구성하는 정점 데이터가 많아 질수록 높은 효율을 보인다. 제안하는 구조는 'RAMP'와 기존의 선행 연구를 비교하여 약 1.18배에서 최대 3배까지의 처리 성능 향상을 확인하였다.

• 전자공학회논문지B
• /
• 제33B권2호
• /
• pp.197-208
• /
• 1996

A neural network-based PSRI(position, scale, and rotation invariant) feature extraction and ATR (automatic target recognition) system are proposed and an efficient parallel implementatio of the proposed system using multicomputer is also presented. In the proposed system, the scale and rotationinvariant features are extracted from the contour projection of the number of edge pixels on each of the concentric circles, which is input t the cooperative network. We proposed how to decide the optimum depth and the width of the parallel pipeline system for real time applications by modeling the proposed system into a parallel pipeline implementation method using transputers is also proposed. The implementation results show that we can extract PSRI features less sensitive to input variations, and the speedup of the proposed ATR system is about 7.55 for the various rotated and scaled targets using 8-node transputer system.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제4권10호
• /
• pp.337-342
• /
• 2015

이 논문에서는 소수 추출 방법인 Sieve of Eratosthenes 알고리즘을 병렬화하여 실행 시간과 에너지 소모 면에서 개선된 효과를 얻고자 실험을 진행하였다. 성능 개선을 위해 부하 균등화를 정교하게 조절하도록 파이프라인 작업 방식을 도입하였고, 멀티코어 컴퓨터 클러스터에 하이브리드 병렬 프로그래밍 모델을 활용하여 효과를 높였다. 소규모 컴퓨터 클러스터와 저전력 컴퓨터에서 구현, 실험한 결과 이전 방식보다 연산 속도가 향상되었고, 에너지 사용량도 감소함을 확인하였다.