• 암석학회지
• /
• 제23권2호
• /
• pp.75-103
• /
• 2014

한반도 남동부 일원에는 주요 지질구조선(양산단층대, 울산단층, 연일구조선, 오천단층계 등)을 따라 제4기 단층들이 도처에 분포하고 있으며, 이들의 기하와 운동학적 특징은 한반도의 제4기 지각변형사와 현생응력상태 등을 이해하는 데 중요한 정보들을 제공한다. 이번 연구에서는 진티단층, 모화단층, 수성지2단층 그리고 왕산단층을 대상으로 대자율이방성 방법을 적용하여 단층가우지의 미세구조를 분석하고 단층의 운동감각을 해석하였으며, 그 결과를 바탕으로 단층암의 미세구조 발달과정과 제4기 응력장에 대해 논의하였다. 대자율이방성 측정을 통해 구해진 자기미세구조로부터 단층의 운동감각을 분석한 결과, 왕산단층을 제외한 나머지 세 단층은 모두 역이동성이 우세한 단층운동에 의한 미세구조가 발달되어 있다. 단층면에 거의 평행한 편평형의 미세구조가 발달하는 점과 이방성정도가 클수록 편평형의 정도가 증가하는 특징에 근거할 때, 단층가우지의 미세구조는 점진적인 변형에 의한 최종응력변형이 기록된 것으로 해석된다. 또한, 최후기에 재활된 역단층운동으로 기존의 단층가우지 내에 존재하는 미세구조들은 모두 지워지고 최후기의 운동에 의한 미세구조만이 기록된 것으로 판단된다. 단층가우지의 자기미세구조 분석을 통해 유추된 운동감각으로부터 구해진 고응력장은 동북동-서남서 방향의 압축력이며, 이 응력장은 지진원 메커니즘, 수압파쇄시험 그리고 단층 지구조분석결과를 통해 구해진 한반도 남동부의 고응력장과 부합된다. 결론적으로 한반도 일원은 제4기 동안 동-서 내지 동북동-서남서 방향의 압축성 응력장이 지배적이었던 것으로 해석된다.

• 한국광물학회지
• /
• 제26권1호
• /
• pp.19-25
• /
• 2013

지난 10여 년간 미항공우주국 주도로 진행된 화성탐사 연구는 화성 암권의 주요 자성광물임을 적철석으로 판명하였다. 금번 연구에서는 적철석의 열잔류자화와 저온 실온포화잔류자를 이용하여 화성 암권에 존재하는 적철석의 자화안정도 검증을 시도하였다. 적철석의 실온포화잔류자화는 모린변환온도인 260 K를 기점으로 급격히 감소한다. 10 K까지 냉각시킨 적철석 시료를 가열하면 260~265 K에서 자화회복이 발생하며, 잔류자화기억도는 37%이다. 실제 화성지표의 일교차는 모린변환온도를 포함하므로, 화성 지표에서 적철석을 함유하는 암체의 자화는 모린변환에 의한 자화안정도가 고려되어야 한다. 지표용암의 고결과 동시에 생성되는 열잔류자화의 강도는 50 ${\mu}m$ 이하 크기에서 적철석 입자반경에 비례하며 증가한다. 화성의 온도구배가 관측된 적은 없지만, 지구의 온도구배를 기준으로 유추하면 대략 1.5 km 이하의 화성 암권은 모린변환온도와 무관하게 적철석의 자화보유가 상시 가능하다. 따라서 행성의 진화가 멈춰진 대략 40억 년 이전에 존재하던 내부기원의 화성자기장 기록이 화성의 암권에 현재까지 보전되어 화성 암권의 자기이상을 유지해온 것으로 해석된다.

• Journal of Computational Design and Engineering
• /
• 제3권4호
• /
• pp.349-362
• /
• 2016

The numerical solutions of unsteady hydromagnetic natural convection Couette flow of a viscous, incompressible and electrically conducting fluid between the two vertical parallel plates in the presence of thermal radiation, thermal diffusion and diffusion thermo are obtained here. The fundamental dimensionless governing coupled linear partial differential equations for impulsive movement and uniformly accelerated movement of the plate were solved by an efficient Finite Element Method. Computations were performed for a wide range of the governing flow parameters, viz., Thermal diffusion (Soret) and Diffusion thermo (Dufour) parameters, Magnetic field parameter, Prandtl number, Thermal radiation and Schmidt number. The effects of these flow parameters on the velocity (u), temperature (${\theta}$) and Concentration (${\phi}$) are shown graphically. Also the effects of these pertinent parameters on the skin-friction, the rate of heat and mass transfer are obtained and discussed numerically through tabular forms. These are in good agreement with earlier reported studies. Analysis indicates that the fluid velocity is an increasing function of Grashof numbers for heat and mass transfer, Soret and Dufour numbers whereas the Magnetic parameter, Thermal radiation parameter, Prandtl number and Schmidt number lead to reduction of the velocity profiles. Also, it is noticed that the rate of heat transfer coefficient and temperature profiles increase with decrease in the thermal radiation parameter and Prandtl number, whereas the reverse effect is observed with increase of Dufour number. Further, the concentration profiles increase with increase in the Soret number whereas reverse effect is seen by increasing the values of the Schmidt number.

• 한국전기전자재료학회논문지
• /
• 제33권2호
• /
• pp.147-150
• /
• 2020

Relatively pure YBCO was first synthesized by heating a mixture of metal carbonates at temperatures between 1,000 and 1,300 K, resulting in the reaction: 4BaCO₃+Y₂(CO₃)₃+6CuCO₃+(1/2_-x)O₂ → 2YBa₂Cu₃O_7-x+1/3CO₂. Modern syntheses of YBCO use the corresponding oxides and nitrates. The superconducting properties of YBa₂Cu₃O_7-x are sensitive to the value of x, i.e., its oxygen content. Only those materials with 0≤x≤0.65 are superconducting below Tc, and when x ~ 0.07, the material superconducts at the highest temperature, i.e., 95 K, or in the highest magnetic fields, i.e., 120 T and 250 T when B is perpendicular and parallel to the CuO₂ planes, respectively. In addition to being sensitive to the stoichiometry of oxygen, the properties of YBCO are influenced by the crystallization methods applied. YBCO is a crystalline material, and the best superconductive properties are obtained when crystal grain boundaries are aligned by careful control of annealing and quenching temperature rates. However, these alternative methods still require careful sintering to produce a quality product. New possibilities have arisen since the discovery of trifluoroacetic acid, a source of fluorine that prevents the formation of undesired barium carbonate (BaCO₃). This route lowers the temperature necessary to obtain the correct phase at around 700℃. This, together with the lack of dependence on vacuum, makes this method a very promising way to achieve a scalable YBCO bulk.

• Journal of Magnetics
• /
• 제18권4호
• /
• pp.481-486
• /
• 2013

An electromagnetic launcher (EML) system accelerates and launches a projectile by converting electric energy into kinetic energy. There are two types of EML systems under development: the rail gun and the coil gun. A railgun comprises a pair of parallel conducting rails, along which a sliding armature is accelerated by the electromagnetic effects of a current that flows down one rail, into the armature and then back along the other rail, but the high mechanical friction between the projectile and the rail can damage the projectile. A coil gun launches the projectile by the attractive magnetic force of the electromagnetic coil. A higher projectile muzzle velocity needs multiple stages of electromagnetic coils, which makes the coil gun EML system longer. As a result, the installation cost of a coil gun EML system is very high due to the large installation site needed for the EML. We present a coil gun EML system that has a new structure and arrangement for multiple electromagnetic coils to reduce the length of the system. A mathematical model of the proposed coil gun EML system is developed in order to calculate the magnetic field and forces, and to simulate the muzzle velocity of a projectile by driving and switching the electric current into multiple stages of electromagnetic coils. Using the proposed design, the length of the coil gun EML system is shortened by 31% compared with a conventional coil gun system while satisfying a target projectile muzzle velocity of over 100 m/s.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2002년도 제7차 학술대회 초록집
• /
• pp.111-111
• /
• 2002

Purpose： This study is to compare the distinct brain activation between implicit and explicit memory retrieval tasks using a non-invasive blood-oxygenation-level-dependent (BOLD) functional magnetic resonance imaging(fMRI). Materials ＆ Methods： We studied seven right-handed, healthy volunteers aged 21-25 years(mean；22 years) were scanned under a 1.5T Signa Horizon Echospeed MR imager(GE Medical Systems, Milwaukee, U.S.A.). During the implicit and explicit memory retrieval tasks of previously teamed words under the conceptual processing, we acquired fMRI data using gradient-echo EPI with 50ms TE, 3000ms TR, 26cm${\times}$26cm field-of-view, 128${\times}$128 matrix, and ten slices(6mm slice thickness, 1 mm gap) parallel to the AC-PC(anterior commissure and posterior commissure) line. By using the program of statistical parametric mapping(SPM99), functional activation maps were reconstructed and quantified.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.374-374
• /
• 2009

We have fabricated pure YBCO films and $BaZrO_3$ doped ones on $CeO_2$ buffered YSZ single crystal substrates using rf-sputtering method. In this work, pure YBCO and 2 vol% BZO doped YBCO target were used to investigate the flux pinning properties of BZO doped YBCO films compared to undoped ones. BZO nanodots within the superconducting materials was known to comprise the self-assembled columnar defects along the c-axis from the bottom of YBCO films up to the top surface, thus can be a very strong pinning sites in the applied magnetic field parallel to them. We will discuss the possibility of growing self-assembled columnar defects in the rf-sputtering method. It is speculated that BZO and YBCO phases can separate and BZO form nanodots surrounded by YBCO epitaxial layers and continuous phase separation and ordering between these two materials, which was well studied in Pulsed Laser Deposition method. For this purpose, some severe experimental conditions such as on-axis sputtering, shorter target-substrate distance, high rf-power, etc was adopted and their results will be presented.

• 한국군사과학기술학회지
• /
• 제6권4호
• /
• pp.22-28
• /
• 2003

In the conventional weapon system, such as gun and small arms, it Is a general trend that for maximization of its performance and enhancement of its effectiveness, the firing control system(FCS) is developed and applied with the guns and small arms in the world. The FCS of the small arms for infantry man is composed of a few of sensors for acquisition of input data of FCS, such as range measurement, position sensing of weapon, temperature, etc., computer, displayer and power pack, and also the air burst munition is developed in parallel for the maximization of FCS's effectiveness. Since the flight time setting fuze for the air burst munition is adapted for next me, the measuring device of the muzzle velocity is needed to overcome the variation of muzzle velocity due to producing procedures and the differences of the using temperatures and so maintain the burst position accuracy This paper contained the technical information on the development of the measuring device of muzzle velocity, which designed in compact & light weight configuration with reliability and accuracy.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.397-403
• /
• 2009

In this paper, an exciter current control of a synchronous generator for ships using a compound type digital automatic voltage regulator (DVAR) in order to provide a constant output voltage of the generator is presented. The compound type DAVR is composed of a controller part to adjust output voltage and an power source unit to supply power to the exciter. The controller part, which generates the PWM switching pattern via the PI controller, drives a power MOSFET for bypass to limit the SG's exciter current. The power source unit part is parallel connected to an output terminal of the generator through a reactor and a power CT. The residual magnetic flux of SG provides exciter current to the exciter through the reactor during the initial running or no load state and load current supplies field current to the exciter through the power CT during loading state. This paper confirmed an experiment to verify the validity of compound type DAVR system for controlling output voltage of synchronous generator.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.620-623
• /
• 2004

In this study, the discharge characteristic of FTS (Facing Targets Sputtering) apparatus was investigated using metal target paramagnetic and ceramic targets such as Zn, Al, $ZnO:Al(Al_2O_3)$, ITO. Threshold voltage and stable stage of discharge show different with target species. Compare with commercial sputtering apparatus, the FTS apparatus is a high-speed sputter method that promotes ionization of sputter gas by screw and reciprocate moving high-speed ${\gamma}$electrons which arrays two targets facing each other, inserts plasma arresting magnetic field to the parallel direction of the center axis of both targets, discharged from targets and accelerated at the cathode falling area. Especially, we notice that the FTS method using ceramic target has stable discharge characteristic even by DC power source.