• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.626-636
• /
• 2021

Boron-neutron capture therapy (BNCT) is a cancer treatment method that exploits the high neutron reactivity of boron. Monitoring the prompt gamma rays (PGs) produced during neutron irradiation is essential for ensuring the accuracy and safety of BNCT. We investigate the imaging of PGs produced by the boron-neutron capture reaction through Monte Carlo simulations of a gamma camera with a SrI₂ scintillator and parallel-hole collimator. GAGG scintillator is also used for a comparison. The simulations allow the shapes of the energy spectra, which exhibit a peak at 478 keV, to be determined along with the PG images from a boron-water phantom. It is found that increasing the size of the water phantom results in a greater number of image counts and lower contrast. Additionally, a higher septal penetration ratio results in poorer image quality, and a SrI₂ scintillator results in higher image contrast. Thus, we can simulate the BNCT process and obtain an energy spectrum with a reasonable shape, as well as suitable PG images. Both GAGG and SrI₂ crystals are suitable for PG imaging during BNCT. However, for higher imaging quality, SrI₂ and a collimator with a lower septal penetration ratio should be utilized.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.55-68
• /
• 2014

Some infrastructure these days is usually constructed under the ground for it to not interfere the foot-traffic of pedestrians, and thus, it is difficult to visually confirm the accurate location of the site where the establishments must be buried. These technical difficulties increase the magnitude of the problems that could arise from over-reliance on the experience of the worker or a mere blueprint. Such problems include exposure to flood and collapse. This paper proposes a constructor-oriented visualization system via mobile gadgets in general construction sites with occluded structures. This proposal is consisted with three stages. First, "Stage of detecting manhole and extracting features" detects and extracts the basis point of occluded structures which is unoccluded manhole. Next, "Stage of tracking features" tracks down the extracted features in the previous stage. Lastly, "Stage of visualizing occluded constructions" analyzes and synthesizes the GPS data and 3D objects obtained from mobile gadgets in the previous stages. This proposal implemented ideal method through parallel analysis of manhole detection, feature extraction, and tracking techniques in indoor environment, and confirmed the possibility through occluded water-pipe augmentation in real environment. Also, it offers a practical constructor-oriented environment derived from the augmented 3D results of occluded water-pipings.

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.107-113
• /
• 1999

The purpose of this study was to develop a miniature imaging gamma probe with high performance that can detect small or residual tumors after surgery. Gamma probe detector system consists of NaI(Tl) scintillator, position sensitive photomultiplier tube (PSPMT), and collimator. PSPMT was optically coupled with 6.5 mm thick, 7.62 cm diameter of NaI(Tl) crystal and supplied with -1000V for high voltage. Parallel hexagonal hole collimator was manufactured for characteristics of 40-mm hole length, 1.3-mm hole diameter, and 0.22 mm septal thickness. Electronics consist of position and trigger signal readout systems. Position signals were obtained with summing, subtracting, and dividing circuit using preamplifer and amplifier. Trigger signals were obtained using summing amplifier, constant fraction discriminator, and gate and delay generator module with preamplifer. Data acquisition and processing were performed by Gamma-PF interface board inserted into pentium PC and PIP software. For imaging studies, flood and slit mask images were acquired using a point source. Two hole phantom images were also acquired with collimator. Intrinsic and system spatial resolutions were measured as 3.97 mm and 5.97 mm, respectively. In conclusion, Miniature gamma probe images based on the PSPMT showed good image quality, we conclude that the miniature imaging gamma probe was successfully developed and good image data were obtained. However, further studies will be required to optimize imaging characteristics.

• Imaging Science in Dentistry
• /
• v.34 no.1
• /
• pp.55-59
• /
• 2004

Cleidocranial dysplasia is a rare and autosomal dominent disorder characterized by aplasia or hypoplasia of the clavicles, an open fontanelle, dental abnormalities, and short stature, A 17-year-old female who presented with short stature and subsequent delay in eruption of permanent teeth is described. she showed the abnormal hypermobility of the shoulder, ocular hypertelorism and concave nasal bridge. Radiographs revealed the underdeveloped maxilla, defect of the cranium in the fontanelle region, and aplasia of the clavicles. Characteristically, panoramic view revealed near parallel-sided borders of the ascending ramus and downward curvature of the zygomatic arch with hypoplasia. The prolonged retention of deciduous teeth with delayed eruption of permanent teeth and multiple embedded supernumerary teeth were striking. Radiographic and clinical investigations revealed Cleidocranial dysplasia.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1223-1227
• /
• 2010

In this study, the orientational behavior of thermotropic liquid crystals (LC) supported on a film of protein receptors was examined. Avidin was roller printed and covalently immobilized onto the surface of gold using NHS/EDC chemistry. The orientation of nematic 4-cyano-4'-pentylbiphenyl (5CB) was found to be parallel to the plane of the printed avidin surface before incubation with a solution of biotin. However, protein-receptor complexation induced a random orientation of 5CB, where protein-receptor complexes disturbed the nanoscale topography of the printed protein surface. Atomic force microscopy and ellipsometry was used to confirm printing and the specific interaction of proteins. These results demonstrate that the combination of LC and roller printing can be used to detect specific interactions between biomolecules by manipulating the orientational behavior of LC to the printed protein surfaces.

• Journal of electromagnetic engineering and science
• /
• v.10 no.3
• /
• pp.166-170
• /
• 2010

To numerically calculate electromagnetic scattering from the electrical-large three-dimensional(3D) objects, the high-frequency approaches have been usually applied, but the accuracy and feasibility of these geometrical and physical optics(GO-PO) approaches, to some extent, are remained to be improved. In this paper, a new framework is developed for calculation of the near-field scattering field of an electrical-large 3D target by using a multilevel fast multipole algorithm(MLFMA) and generation of radar images by using a fast back-projection(FBP) algorithm. The MPI(Message Passing Interface) parallel computing is carried out to multiply the calculation efficiency greatly. Finally, a simple example of perfectly electrical conducting(PEC) patch and a canonical case of Fighting Falcon F-16 are presented.

• Applied Microscopy
• /
• v.42 no.3
• /
• pp.164-173
• /
• 2012

The relaxor ferroelectric feature in lead-free perovskite oxides, where the dipoles are randomly oriented and they can be feasibly aligned parallel to the external bias, is attracting lots of attention in the field of piezoelectric materials science, since it is one of candidates to replace the toxic lead-based materials that are still being commercially used. However, the origin of relaxor characteristic and its related atomic structure are still ambiguous. In this study, $Na_{1/2}Bi_{1/2}TiO_3$, chosen as a model relaxor system, was found to exhibit a cationic-disordered atomic structure; and furthermore the nonpolar atomic structure and its related oxygen tilting were ascertained via annular bright field imaging skill. We also found that this cationic disordering gives rise to the local formation of atomic vacancies.

• Journal of Integrative Natural Science
• /
• v.12 no.4
• /
• pp.105-115
• /
• 2019

In this paper, a prediction system is proposed to control the brightness of smart street lamps by predicting the moving path through the reduction of consumption power and information of pedestrian's past moving direction while meeting the function of existing smart street lamps. The brightness of smart street lamps is adjusted by utilizing the walk tracking vector and soft hand-off characteristics obtained through the motion sensing sensor of smart street lamps. In addition, the motion vector is used to analyze and predict the pedestrian path, and the GPU is used for high-speed computation. Pedestrians were detected using adaptive Gaussian mixing, weighted difference imaging, and motion vectors, and motions of pedestrians were analyzed using the extracted motion vectors. The preprocessing process using linear interpolation is performed to improve the performance of the proposed prediction system. Fuzzy prediction system and neural network prediction system are designed in parallel to improve efficiency and rough set is used for error correction.

• Imaging Science in Dentistry
• /
• v.30 no.3
• /
• pp.229-234
• /
• 2000

Cleidocranial dysplasia (previously known as cleidocranial dysostosis) is a well-known, rare and hereditary skeletal disorder characterized by a variety of dental abnormalities and as its name implies, striking involvement of the cranial vaults and clavicles. A 17-year-old female who presented with short stature and prolonged retention of deciduous teeth, subsequent delay in eruption of permanent teeth is described. She could touch her shoulders together at the midline anteriorly. Diagnostic procedures showed hypoplasia of the maxillary and zygomatic bones, open fontanelles and sutures, and aplasia of the clavicles. The paranasal sinuses were absent or underdeveloped. Characteristically, she had near parallel-sided borders in the ascending ramus of the mandible and abnormal-shaped, the slender pointed coronoid process. The zygomatic arches had a downward bend and discontinuity at the zygomaticotemporal suture area. Radiographic and clinical investigations of her cranial and skeletal abnormalities revealed features of cleidocranial dysplasia.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.79-82
• /
• 2006

This paper presents to examine the ability of an electrical resistivity method to monitor the grouting effect at subsidence area. To monitor the changes in ground resistivity before and during the grout, series of electrical resistivity monitoring surveys have been conducted. Data has acquired in the form of grid making nine lines parallel to road and four lines traverse the road. Two kinds of electrode arrays modify pole-pole and dipole-dipole arrays were used during resistivity data acquisition. In this paper, the results show that electrical prospecting is an effective method to detect low resistivity imaging zone by grout during the ground reinforcement.