• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.702-708
• /
• 2017

The heat generation rate in a telecommunications cabinet keeps increasing due to the increased usage of mobile devices. Insufficient removal of the heat increases the cabinet temperature, which results in the malfunction of the electronic devices. In this study, tests were conducted on aluminum and plastic heat exchangers for cooling a telecommunications cabinet, and the results were compared with theoretical predictions. The aluminum heat exchanger comprised counter flow parallel channels with 4.5-mm pitch, and the plastic heat exchangers comprised cross or cross-counter flow triangular channels with 2.0-mm pitch. The volume of the cross flow heat exchanger was the same as that of the aluminum heat exchanger, and the volume of the cross-counter heat exchanger was 33% larger than that of the aluminum heat exchanger. The results show that the heat transfer rate is the highest for the cross-counter heat exchanger and lowest for the aluminum one. The temperature efficiency of the cross-counter heat exchanger was 56% higher than that of the aluminum one and 20% higher than that of the cross flow heat exchanger. The pressure drop of the cross-counter heat exchanger was approximately the same as that of the aluminum one. The heat exchange efficiency was the highest for the cross-counter heat exchanger and lowest for the cross flow heat exchanger. The theoretical analysis somewhat overestimated or underestimated the data.

• KSBB Journal
• /
• v.11 no.1
• /
• pp.22-29
• /
• 1996

Immobilized bioprocess was carried out for continuous production of cyclosporin A (CyA) produced intracellularly as a secondary metabolite by a filamentous fungus, Tolypocladium inflatum. Immobilization procedure for entrapping conidiospores of the producer was significantly simplified by use of a modified immobilization technique. A newly-designed immobilized perfusion reactor system (IPRS) showed good process benefits as demonstrated by the role of the high density immobilized cells as an efficient biomass generator, continuously supplying highly active CyA-producing free cells (1.0g/$\ell$/hr) even at very high dilution rate ($0.1hr^{-1}$). IPRS bioprocess was possible since efficient decantor system developed in our laboratory separated the sloughed-off free cells from the immobilized biomass effectively, thus overcoming wash-out phenomenon frequently encountered in continuous free cell cultures. Furthermore the released-free cells remaining in the bulk solution did not appear to cause substrate mass transfer limitation which was often experienced in suspended mycelial fungal cell fermentations. The primary reason for this was that the suspension broth of the IPRS mainly consisted of roundshaped short mycelial fragments and conidiospores, still remaining Newtonian even at high cell density. In parallel with IPRS bioprocess development, other key factors to be considered necessarily for significant increase in CyA productivity would be strain improvement and medium optimization for the immobilized cells.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.37
• /
• pp.33.1-33.9
• /
• 2015

Background: The porion (Po) is used to construct the Frankfort horizontal (FH) plane for cephalometrics, and the external auditory meatus (EAM) is to transfer and mount the dental model with facebow. The classical assumption is that EAM represents Po by the parallel positioning. However, we are sometimes questioning about the possible positional disparity between Po and EAM, when the occlusal cant or facial midline is different from our clinical understandings. The purpose of this study was to evaluate the positional parallelism of Po and EAM in facial asymmetries, and also to investigate their relationship with the maxillary occlusal cant. Methods: The 67 subjects were classified into three groups. Group I had normal subjects with facial symmetry ($1.05{\pm}0.52mm$ of average chin deviation) with minimal occlusal cant (<1.5 mm). Asymmetry group II-A had no maxillary occlusal cant (average $0.60{\pm}0.36$), while asymmetry group II-B had occlusal cant (average $3.72{\pm}1.47$). The distances of bilateral Po, EAM, and mesiobuccal cusp tips of the maxillary first molars (Mx) from the horizontal orbital plane (Orb) and the coronal plane were measured on the three-dimensional computed tomographic images. Their right and left side distance discrepancies were calculated and statistically compared. Results: EAM was located 10.3 mm below and 2.3 mm anterior to Po in group I. The vertical distances from Po to EAM of both sides were significantly different in group II-B (p=0.001), while other groups were not. Interside discrepancy of the vertical distances from EAM to Mx in group II-B also showed the significant differences, as compared with those from Po to Mx and from Orb to Mx. Conclusions: The subjects with facial asymmetry and prominent maxillary occlusal cant tend to have the symmetric position of Po but asymmetric EAM. Some caution or other measures will be helpful for them to be used during the clinical procedures.

• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.81-84
• /
• 2005

The origin for the charge disproportionation (CD) transition in polycrystalline $La_{1/3}Sr_{2/3}FeO_{2.96}$ was examined using X-ray diffraction and the external field $M\ddot{o}ssbauer$ssbauer spectroscopy. In order to see how the external magnetic field affects the CD state above its transition temperature, an external magnetic field of up to 6 T was applied either parallel or perpendicular to the $\gamma-ray$ direction with the sample temperature fixed at 225 K, which was above the CD transition temperature. Without an external magnetic field, a completely paramagnetic singlet was obtained in the temperature range of the averaged valence state above the transition temperature, which was interpreted as coming from the average valence $Fe^{3.6+}$. In the longitudinal geometry, a magnetic Zeeman with its intensity ratio 3:0:1:1:0:3 is superimposed to the central singlet. In the transverse geometry, however, the central singlet disappears and only a magnetic component with its intensity ratio 3:4:1:1:4:3 emerges. The existence of a singlet is understood as an evidence of the fast electron-transfer among Fe ions. Since the singlet still exists under the magnetic field, the application of an external field has little effect on the conduction mechanism of hopping electrons.

• Journal of Life Science
• /
• v.17 no.7 s.87
• /
• pp.905-909
• /
• 2007

The dual-function protein redox factor-1 (Ref-1) is essential for base excision repair of oxidatively damaged DNA and also governs the activation of many redox-sensitive transcription factors. We examined the role of Ref-1 in regulation of nitric oxide (NO) synthesis employing adenoviral-mediatedoverexpression of Ref-1 in bradykinin-stimulated endothelial cells. Intracellular NO was detected with the NO-sensitive fluorophore DAF-2. Overexpression of Ref-1 potentiates bradykinin-stimulated NO production in endothelial cells. And, cells ifected with AdRef-1 showed higher fluorescence intensity compared with uninfected or AdD1312-infected cells. In parallel with this, over expression of Ref-1 also stimulated endothelial NO synthase (eNOS) enzyme activity, compared with unifected or AdD1312-infected cells, in bradykinin-stimulated cells as well as in unstimulated cells. These results suggest that Ref-1 implicates in endothelium-dependent vasorelaxation resulting from NO production in vascular system.

• Journal of Astronomy and Space Sciences
• /
• v.29 no.2
• /
• pp.233-244
• /
• 2012

The Korea Astronomy and Space Science Institute and the Department of Astronomy at the University of Texas at Austin are developing a near infrared wide-band high resolution spectrograph, immersion grating infrared spectrometer (IGRINS). The compact white-pupil design of the instrument optics uses seven cryogenic mirrors, including three aspherical off-axis collimators and four flat fold mirrors. In this study, we introduce the optomechanical mount designs of three off-axis collimating mirrors and one flat slit-viewer fold mirror. Two of the off-axis collimators are serving as H and K-band pupil transfer mirrors, and are designed as system alignment compensators in combination with the H2RG focal plane array detectors in each channel. For this reason, the mount designs include tip-tilt and parallel translation adjustment mechanisms to properly perform the precision alignment function. This means that the off-axis mirrors' optomechanical mount designs are among the most sensitive tasks in all IGRINS system hardware. The other flat fold mirror is designed within its very limitedly allowed work space. This slit-viewer fold mirror is mounted with its own version of the six-point kinematic optics mount. The design work consists of a computer-aided 3D modeling and finite element analysis (FEA) technique to optimize the structural stability and the thermal behavior of the mount models. From the structural and thermal FEA studies, we conclude that the four IGRINS mirror mounts are well designed to meet all optical stability tolerances and system thermal requirements.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.11
• /
• pp.44-52
• /
• 2011

In this article, we present a QoS-guaranteed IP mobility management scheme of Internet service for fast moving vehicles with multiple wireless network interfaces. The idea of the proposed mechanism consists of two things. One is that new wireless connections are established to available wireless channels whenever the measured data rate at the vehicle equipped with mobile gateway drops below to the required data rate of the user requirement. The other is that parallel distribution packet tunnels between an access router and the mobile gateway are dynamically constructed using multiple wireless network interfaces in order to guarantee the required data rate during the mobile gateway's movement. By doing these methods, the required data rate of the mobile gateway can be preserved while eliminating the possible delay and packet loss during handover operation, thus resulting in the guaranteed QoS. The architecture of the IETF standard HMIPv6 has been extended to realize the proposed scheme, and detailed algorithms for the extension of HMIPv6 has been designed. Finally, simulation has been done for performance evaluation, and the simulation results show that the proposed mechanism demonstrates guaranteed QoS during the handover with regard to the handover delay, packet loss and throughput.

• Journal of the Korean Society of Physical Medicine
• /
• v.5 no.2
• /
• pp.193-201
• /
• 2010

Purpose : This study achieved to search the effect of the circuit exercise and conventional exercise on walking ability(walking speed, endurance, dynamic balance, speed, endurance and pedestrian crossing) in chronic stroke. Methods : Since is diagnosed by stroke, to 30 chronic stroke patients who more than 1 year past the 15 circuit exercise group, the 15 conventional exercise group random the circuit exercise group applied circuit exercise 3th 8 weeks each week after neurological treatment because assigning and the conventional exercise group executed round trip walk exercise in parallel bar 3th 8 weeks each week after neurological treatment. The data of 25 patients who complete experimental course were statistically analysed. Results : The results of this dissertation were as following : 1) There were significantly increased after experimental of 10 meter walk test, 6 minutes walk test and Timed "Up and Go" test in circuit exercise group (p<.001). 2) There were significantly increased after experimental of 2, 4 and 6 lane road crossing mobility in Walking circuit exercise group(p<.01). 3) There were significantly differences after experimental of 10 meter walk test, 6 minutes walk test and Timed "Up and Go" test change quantity between circuit exercise group and conventional exercise group(p<.05). 4) There were correlations were found between the TUG test and 2, 4 and 6 lane road (2 lane road; r=.463, p<.01., 4 lane road; r=515, p<.01., 6lane road; r=.710, p<.01), and there were correlations were found between the 10 meter walk test and 6 minutes walk test(r=.595, p<.01), TUG test(r=.662, p<.01) and 6 lane road(r=.527, p<.01). Conclusion : Even if improvement of walk function through training consists in room, transfer of actuality pedestrian crossing is no change outside the room. Because it is much variable of the weather, seasonal factor, temperature, pedestrian number, state of underneath etc. outside the room. Then, in room after direction promotion of walk function to be promotion of walk function in actuality life and need development of connectable training method consider.

• Journal of Technology Innovation
• /
• v.24 no.4
• /
• pp.277-307
• /
• 2016

Since 2011, DCF(Discounted Cash Flow) method has been used initiatively for valuating R&D technology assets in the agricultural food industry and recently technology valuation based on royalties comparison among technology transfer transactions has been also carried out in parallel when evaluating the technology assets such as new seed development technologies. Since the DCF method which has been known until now has many input variables to be estimated, sophisticated estimation has been demanded at the time of technology valuation. In addition, considering more similar trading cases when applying sales transaction comparison or industry norm method based on information of technology transfer royalty, it is an important issue that should be taken into account in the same way in the Agri-Food industry. The main input variables used for technology valuation in the Agri-Food industry are life cycle of technology asset, the financial information related to the Agri-Food industry, discount rate, and technology contribution rate. The latest infrastructure building and data updating related to technology valuation has been carried out on a regular basis in the evaluation organization of the Agri-Food segment. This study verifies the key variables that give the most important impact on the results for the existing technology valuation in the Agri-Food industry and clarifies the difference between the existing valuation result and the outcome by referring the support information that is derived through the latest input information applied in DCF method. In addition, while presenting the scheme to complement fragment information which the latest input data just influence result of technology valuation, we tried to perform comparative analysis between the existing valuation results and the evaluated outcome after the latest of reference data for making a decision the input values to be estimated in DCF. To perform these analyzes, it was first selected the representative cases evaluated past in the Agri-Food industry, applied a sensitivity analysis for input variables based on these selected cases, and then executed a simulation analysis utilizing the key input variables derived from sensitivity analysis. The results of this study is to provide the information which there are the need for modernization of the data related to the input variables that are utilized during valuating technology assets in the Agri-Food sector and for building the infrastructure of the key input variables in DCF. Therefore it is expected to provide more fruitful information about the results of valuation.

• Journal of Biomedical Engineering Research
• /
• v.25 no.4
• /
• pp.253-259
• /
• 2004

in this study, we developed a Monte Carlo imaging simulation code written by the visual C$\^$++/ programing language for design optimization of a digital X-ray imaging system. As a digital X-ray imaging system, we considered a Gd$_2$O$_2$S(Tb) scintillator and a photosensor array, and included a 2D parallel grid to simulate general test renditions. The interactions between X-ray beams and the system structure, the behavior of lights generated in the scintillator, and their collection in the photosensor array were simulated by using the Monte Carlo method. The scintillator thickness and the photosensor array pitch were assumed to 66$\mu\textrm{m}$ and 48$\mu\textrm{m}$, respertively, and the pixel format was set to 256 x 256. Using the code, we obtained X-ray images under various simulation conditions, and evaluated their image qualities through the calculations of SNR (signal-to-noise ratio), MTF (modulation transfer function), NPS (noise power spectrum), DQE (detective quantum efficiency). The image simulation code developed in this study can be applied effectively for a variety of digital X-ray imaging systems for their design optimization on various design parameters.