• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.895-902
• /
• 2015

This paper presents a high-speed sensing and noise cancellation technique for large touch screens, which is called FDCS (Frequency Division Concurrent Sensing). Most conventional touch screen detection methods apply excitation pulses sequentially and analyze the sensing signals sequentially, and so are often unacceptably slow for large touch screens. The proposed technique applies sinusoidal signals of orthogonal frequencies simultaneously to all drive lines, and analyzes the signals from each sense line in frequency domain. Its parallel driving allows high speed detection even for a very large touch screens. It enhances the sensing SNR (Signal to Noise Ratio) by introducing a frequency domain noise filtering scheme. We also propose a pre-distortion equalizer, which compensates the drive signals using the inverse transfer function of touch screen panel to further enhance the sensing SNR. Experimental results with a 23" large touch screen show that the proposed technique enhances the frame scan rate by 273% and an SNR by 43dB compared with a conventional scheme.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.40-43
• /
• 2006

Public demand for the heat pump system as a next generation energy equipment is increasing for its eco-friendly and cost-effective advantage. Many researches have been concentrated on how to calculate and develop its own efficiency, while the possible effect of the heat pump operation on the whole subsurface temperature distribution is relatively less considered, During the current study, subsurface temperature disturbance caused by seasonal surface temperature cycle in Busan area and general W-tube heat pump operation is simulated in 3-dimensional heterogeneous medium. It shows that subsurface deeper than 10m from the surface remains nearly unchanged throughout the 4 seasons and groundwater convect ion in highly permeable layer near the surface acts like a main path of heat plume from heat pump system, This implies the significance of detail descript ion in shallow sedimentary layer or highly permeable layer which plays an important role on the regional flow advection and heat transfer. Also, the effect of groundwater convection increases when the arrangement of the 2 injection pipes and 2 extract ion well is maintained parallel to groundwater flow. Therefore, more careful and detail investigation is required before installation and operation of heat pump system that it may not cause any possible change of microbial ecosystem in the shallow subsurface environment or 'contamination of temperature' for groundwater use as well as the loss of efficiency of the equipment itself. This can also help to design the optimized grouting system for heat pump.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.753-758
• /
• 2009

Recently the high-end CMOS image sensors are developed, conforming to the SMIA CCP2 specification, which is a high-speed low-power serial interface based on LVDS technology. But this kind of technology trend makes the existing equipments are no longer useful, although their capability is still good enough to handle the recent image sensors if there was no interfacing problem. In this paper, we propose and realize a data protocol conversion system that translates the SMIA CCP2 serial signals into the existing 10-bit parallel signals. The proposed system is composed of a de-serializer and a FPCA chip, and thus can be constructed on a small PCB which enables easy integration between the existing equipments and the new high-end image sensors. Besides, the maximum transfer rate by the SMIA specification is also achieved on the implemented system. So it is expected that the implemented system can be used as a general-purpose protocol converter in a variety of sensor-related application fields.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.819-825
• /
• 2016

In this paper, a phase locked loop structure with parallel dual loop which have a different bandwidth has been proposed. The bandwidths depending on transfer functions are obtained through dual loops. Two different bandwidths of each loop are used to suppress noise on the operating frequency range. The proposed phase locked loop has two different voltage controlled oscillator gains to control two different wide and narrow loop filters. Furthermore, it has the locking status indicator to achieve an accurate locking condition. The phase margin of $58.2^{\circ}$ for wide loop and $49.4^{\circ}$ for narrow loop is designed for stable operation and the phase margin of $45^{\circ}$ is maintained during both loops work together. It has been designed with a 1.8V 0.18um complementary metal oxide semiconductor (CMOS) process. The simulation results show that the proposed phase locked loop works stably and generates a target frequency.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.892-895
• /
• 2006

The atmospheric effects on the retrieval of sea ice concentration from passive microwave sensors are examined using simulated data typical for the Arctic summer. The simulation includes atmospheric contributions of cloud liquid water and water vapor and surface wind on surface emissivity on the microwave signatures. A plane parallel radiative transfer model is used to compute brightness temperatures at SSM/I frequencies over surfaces that contain open water, first-year (FY) ice and multi-year (MY) ice and their combinations. Synthetic retrievals in this study use the NASA Team (NT) algorithm for the estimation of sea ice concentrations. This study shows that if the satellite sensor’s field of view is filled with only FY ice the retrieval is not much affected by the atmospheric conditions due to the high contrast between emission signals from FY ice surface and the signals from the atmosphere. Pure MY ice concentration is generally underestimated due to the low MY ice surface emissivity that results in the enhancement of emission signals from the atmospheric parameters. Simulation results in marginal ice areas also show that the atmospheric and surface effects tend to degrade the accuracy at low sea ice concentration. FY ice concentration is overestimated and MY ice concentration is underestimated in the presence of atmospheric water and surface wind at low ice concentration. In particular, our results suggest that strong surface wind is more important than atmospheric water in contributing to the retrieval errors of total ice concentrations over marginal ice zones.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.319-323
• /
• 2008

본 연구는 인접한 저수지 간의 연계운영을 통해 홍수조절능력을 제고시키기 위한 저수용량 공유기법 개발의 일환으로서 안동댐과 임하댐의 병렬저수지 시스템을 연구대상유역으로 선정하였다. 홍수조절에 의한 병렬저수지의 연계운영기법으로서 홍수시 임하댐의 저수량을 안동댐으로 전환시켜 임하댐의 홍수조절능력을 제고시키고 안동댐의 저수량을 확보하여 용수공급능력을 제고시킬 수 있는 방법을 연구하였다. 임하댐의 유입량 중 안동댐으로 전환되는 유량비를 최적화계수 a로 두고 재현기간별로 유량전환비를 산정한 결과 최적화계수로 제안한 유량전환비 a는 재현기간 T=50년일 때 $a_{50}=0.310$, T=80년일 때 $a_{80}=0.185$, T=100년일 때 $a_{100}=0.130$, T=150년일 때 $a_{150}=0.035$로 산정되었으며, T=200년일때는 유량전환에 의한 홍수조절 효과가 없음을 알 수 있었다. 이러한 계산결과는 홍수규모가 클 경우에 안동댐 저수량(위) 증가로 인하여 임하댐의 유량전환비가 감소하기 때문임을 알 수 있었으며, 그 유량전환비가 거의 0이 될 경우는 홍수규모가 재현기간 T=200년 빈도 이상에서 나타나고 있음을 알 수 있었다. 이로 인한 홍수조절효과는 임하댐의 경우 재현기간 T=50년 일 때 4.1%, T=80년일 때 2.8%, T=100년일 때 2.1% 및 T=150년일 때 0.7%로 증가한 것으로 나타났으며, 안동댐의 경우 재현기간 T=50년일 때 14.4%, T=80년일 때 8.6%, T=100년일 때 6.0% 및 T=150년일 때 1.6%로 증가한 것으로 분석되었다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.1
• /
• pp.66-75
• /
• 2002

For the theoretical performance analysis of Viterbi Decoder for wireless LAN with data rate 12Mbps, code rate 1/2 and constraint length 7 defined in IEEE 802.11a, the transfer function is derived using Cramer's rule and the first-event error probability and bit error probability is derived under the AWGN. In the design process, input symbol is quantized into 16 steps for 4 bit soft decision and register exchange method instead of memory method is proposed for trace back, which enables the majority at the final decision stage. In the implementation, the Viterbi decoder based on parallel architecture with pipelined scheme for processing 12Mbps high speed data rate and AWGN generator are implemented using FPGA chips. And then its performance is verified in real time.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.37 no.3
• /
• pp.1-11
• /
• 2000

An example-based machine translation approach is a new paradigm for resolving various problems caused by the rules of conventional rule-based machine translation. But, in pure example-based machine translation, it is very hard to find similar examples matched with input sentences by using reasonable parallel corpus. This problem causes large overheads in the process of sentence generation. This paper proposes new method of English-Korean transfer using both patterns and examples. The patterns are composed of sentence patterns and phrase patterns. Meta parts of the patterns make the example-based machine translation more practical by raising the probability to find similar examples. The use of patterns and examples can reduce the ambiguities in source language analysis and give us a high quality of MT. And experimental results with a test corpus are discussed.

• Journal of Digital Convergence
• /
• v.11 no.4
• /
• pp.229-234
• /
• 2013

The purpose of this study is to develop a lighting apparatus of the illuminance and color temperature to maximize the ability of the optimal combination of light sources that can be controlled efficiently control device. Finding people comfortable feeling for indoor lighting that can be used in a variety of color temperature illumination area by combining light sensitivity can be realized. Lighting apparatus for fluorescent lamps with different color temperature of 2000K and 8000K, and by varying the quantity of each of the fluorescent lamps, the illuminance of lighting equipment and color temperature through optical simulations were evaluated. By infrared remote control receiver, divided into 5 types of relaxation, conversation, meeting, hospitality, arts and the lighting environment you want to transfer the PC0 ~ PC4 through the parallel port on the mode selected by the user at the receiving end the DC voltage output. EEFL inverter input DC voltage and the DC input voltage, depending on the level of EEFL dimming value (illuminance and color temperature) lighting environment you want to create change while using a PIR sensor EEFL automatically turn off if people do not have was developed so that the power consumption so you can save.

• Journal of Korea Game Society
• /
• v.13 no.5
• /
• pp.55-62
• /
• 2013

Since large terrain data can not be loaded on the GPU or CPU memory at once, out-of-core methods which read necessary part from the secondary storage such as a hard disk are commonly used. However, long delay may occur due to limited bandwidth while loading the data from the hard disk to memory. We propose efficient rendering method of large terrain data, which compresses the data with wavelet technique and save its coefficients in RGBA channel of an image us, then decompresses that in rendering stage. Entire process is performed in GPU using Direct Compute. By reducing the amount of data transfer, performing wavelet computations in parallel and doing decompression quickly on the GPU, our method can reduce rendering time effectively.