• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.289-299
• /
• 2018

Electric-field coupled power transfer (ECPT) systems employ a high frequency electric field as an energy medium to transfer power wirelessly. Existing ECPT systems have made great progress in terms of increasing the transfer distance. However, the topologies of these systems are complex, and the transfer characteristics are very sensitive to variations in the circuit parameters. This paper proposes an ECPT system with a double-sided LC network, which employs a parallel LC network on the primary side and a series LC network on the secondary side. With the same transfer distance and output power, the proposed system is simpler and less sensitive than existing systems. The expression of the optimal driving voltage for the coupling structure and the characteristics of the LC networks are also analyzed, including the transfer efficiency, parameter sensitivity and total harmonic distortion. Then, a design method for the system parameters is provided according to these characteristics. Simulations and experiments have been carried out to verify the system properties and the design method.

• 한국독성학회:학술대회논문집
• /
• 한국독성학회 2006년도 추계학술대회
• /
• pp.65-74
• /
• 2006

Modem drug discovery requires rapid pharmacokinetic evaluation of chemically diverse compounds for early candidate selection. This demands the development of analytical methods that offer high-throughput of samples. Naturally, liquid chromatography / tandem mass spectrometry (LC-MS/MS) is choice of the analytical method because of its superior sensitivity and selectivity. As a result of the short analysis time(typically 3-5min) by LC-MS/MS, sample preparation has become the rate- determining step in the whole analytical cycle. Consequently tremendous efforts are being made to speed up and automate this step. In a typical automated 96-well SPE(solid-phase extraction) procedure, plasma samples are transferred to the 96-well SPE plate, internal standard and aqueous buffer solutions are added and then vacuum is applied using the robotic liquid handling system. It takes only 20-90 min to process 96 samples by automated SPE and the analyst is physically occupied for only approximately 10 min. Recently, the ultra-high flow rate liquid chromatography (turbulent-flow chromatography)has sparked a huge interest for rapid and direct quantitation of drugs in plasma. There is no sample preparation except for sample aliquotting, internal standard addition and centrifugation. This type of analysis is achieved by using a small diameter column with a large particle size(30-5O ${\mu}$m) and a high flow rate, typically between 3-5 ml/min. Silica-based monolithic HPLC columns contain a novel chromatographic support in which the traditional particulate packing has been replaced with a single, continuous network (monolith) of pcrous silica. The main advantage of such a network is decreased backpressure due to macropores (2 ${\mu}$m) throughout the network. This allows high flow rates, and hence fast analyses that are unattainable with traditional particulate columns. The reduction of particle diameter in HPLC results in increased column efficiency. use of small particles (<2 urn), however, requires p.essu.es beyond the traditional 6,000 psi of conventional pumping devices. Instrumental development in recent years has resulted in pumping devices capable of handling the requirements of columns packed with small particles. The staggered parallel HPLC system consists of four fully independent binary HPLC pumps, a modified auto sampler, and a series of switching and selector valves all controlled by a single computer program. The system improves sample throughput without sacrificing chromatographic separation or data quality. Sample throughput can be increased nearly four-fold without requiring significant changes in current analytical procedures. The process of Bioanalytical Method Validation is required by the FDA to assess and verify the performance of a chronlatographic method prior to its application in sample analysis. The validation should address the selectivity, linearity, accuracy, precision and stability of the method. This presentation will provide all overview of the work required to accomplish a full validation and show how a chromatographic method is suitable for toxirokinetic sample analysis. A liquid chromatography/tandem mass spectrometry (LC-MS/MS) method developed to quantitate drug levels in dog plasma will be used as an example of tile process.

• 한국통신학회논문지
• /
• 제22권2호
• /
• pp.318-324
• /
• 1997

Chua 회로는 간단한 전기 및 전자 회로를 구성하여 카오스 현상을 나타내는 회로로 자율, 3차계, 가역성(Reciprocal)이며 1개의 비션형 소자인 3구분 선형 저항과 4개의 선형 소자인 (R, L, $C_1,\;C_2$)로 구성되는 발진회로이다. 본 논문에서는 Chua 회로의 병렬 LC 공진기를 단락하여 시간 지연을 갖는 무손실 전송선로로 치환하고 특성 곡선법을 써서 파라미터 변화에 의한 카오스 운동과 주기운동이 있음을 위상공간과 분기도(Bifurcation diagram)로 확인 하였으며 무손실 전송선로가 원래의 Chua 회로와 유사한 어트렉터가 존재함을 확인하였다.

• 한국전자파학회논문지
• /
• 제23권3호
• /
• pp.361-366
• /
• 2012

본 논문에서는 TSMC 0.18 ${\mu}m$ CMOS 공정을 사용하여 저전력, 5.2 GHz 대역 저잡음 증폭기를 설계하였다. 제안된 회로는 5.2 GHz 대역 저잡음 증폭기 설계를 위해, 공통 게이트 구조를 이용하여 입력 정합을 하였다. 입력 정합단에 캐패시터 크로스 커플링 방법을 사용하여 적은 양의 전류를 흘려 적당한 이득을 얻었다. 추가적인 전력 소비 없이 부족한 이득을 증가시키기 위하여 전류 재사용 방법을 이용하여 공통 게이트 증폭단 위에 공통 소스 구조를 추가하였다. 전류 재사용단의 인덕터의 크기를 줄이기 위하여 캐패시터를 병렬로 연결함으로써 실효 인덕턴스 값을 증가시켜 인덕터의 크기를 줄였다. 제안된 회로는 5.2 GHz 대역에서 17.4 dB의 이득과 2.7 dB의 잡음 지수 특성을 갖는다. 저잡음 증폭기는 1.8 V의 공급 전압에 대해 5.2 mW의 전력을 소비한다.

• 한국전자파학회논문지
• /
• 제22권9호
• /
• pp.904-911
• /
• 2011

본 논문에서는 도파관 여파기 설계에 유용한 이중 공진 구조를 제안하였다. 본 구조는 리지가 있는 원형 개구와 네 개의 팔(arm)을 갖는 사각형 도체 패치가 결합된 아이리스 형태로서 한 개의 통과 대역과 그 양쪽에 두개의 저지 대역이 동시에 나타나는 이중 공진 특성을 갖는다. 이러한 공진 특성은 LC-병렬 공진 회로와 직렬 공진 회로가 결합된 등가 회로를 통하여 잘 설명되고, 구조의 파라미터를 조정하여 쉽게 조절할 수 있다. 실제 구조는 마이크로스트립을 에칭하여 도파관의 단면에 삽입하기 쉬운 아이리스 형태로 구현되었다. WR-90 규격의 도파관 및 어댑터, VNA를 사용하여 이 공진 구조의 투과 특성을 측정하였다. 제안된 구조의 이중 공진 특성은 도파관 여파기 설계 및 스커트 특성 개선에 유용할 것으로 기대된다.

• 대한전자공학회논문지
• /
• 제11권4호
• /
• pp.19-24
• /
• 1974

LC ladder형의 여파회로등에 필요한 비접지 inductance를 유도소자없이 구성하기 위하여 2개의 연산증폭기와 수동소자를 쓰는 방식을 제시하였다. Indefinite admittance matrix를 써서 이 회로강이 가등적으로 병렬로 정과 부의 저항과 직렬로 순 inductance가 있는 π형회로임을 증명하였고, 실제로 low-pass 여파회로의 구성에 응용하여 얻어진 주파수특성이 만족할만함을 보였다. 이 방법에 의한 비접지 inductance는 지금까지 발표된 방법과 비교할 때 실현된 inductance에 직렬저항성분이 없음으로 Q가 높아서 유리하다. 또한 소요된 연산증폭기의 수도 적다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 B
• /
• pp.533-535
• /
• 1997

Chua's circuit is a simple electronic network which exhibits a variety of bifurcation and attractors. The circuit consists of two capacitors, an inductor, a linear resistor, and a nonlinear resistor. In this paper we analyze a circuit obtained by replacing the parallel LC resonator in the Chua's circuit by lossless transmission line. By using the method of characteristics of this circuit we show that various periodic motions and chaotic motions can the attained according to parameter variations. From Chua's circuit with a lossless transmission line, a variety of chaotic attractors which are similar to those of the normal Chua's circuit are observed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
• /
• pp.41-41
• /
• 2008

In general, polyimides (PIs) are used in alignment layers in liquid crystal displays (LCDs). The rubbing alignment technique has been widely used to align the LC molecules on the PI layer. Although this method is suitable for mass production of LCDs because of its simple process and high productivity, it has certain limitations. A rubbed PI surface includes debris left by the cloth, and the generation of electrostatic charges during the rubbing induces local defects, streaks, and a grating-like wavy surface due to nonuniform microgrooves that degrade the display resolution of computer displays and digital television. Additional washing and drying to remove the debris, and overwriting for multi-domain formation to improve the electro-optical characteristics such as the wide viewing angle, reduce the cost-effectiveness of the process. Therefore, an alternative to non-rubbing techniques without changing the LC alignment layer (i.e, PI) is proposed. The surface of LC alignment layers as a function of the ion beam (IE) energy was modified. Various pretilt angles were created on the IB-irradiated PI surfaces. After IB irradiation, the Ar ions did not change the morphology of the PI surface, indicating that the pretilt angle was not due to microgrooves. To verify the compositional behavior for the LC alignment, the chemical bonding states of the ill-irradiated PI surfaces were analyzed in detail by XPS. The chemical structure analysis showed that ability of LCs to align was due to the preferential orientation of the carbon network, which was caused by the breaking of C=O double bonds in the imide ring, parallel to the incident 18 direction. The potential of non-rubbing technology for fabricating display devices was further conformed by achieving the superior electro-optical characteristics, compared to rubbed PI.