• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.684-687
• /
• 2002

In optical disk drive(ODD), pickup actuator, which comprises a key part of an optical disk drive equipment. must be thin. compact, and high sensitive. Low tilt is also an important requirement for the actuator, since optical disks are to high density. This tilt occurs from around the axis parallel to the tangential and radial direction of the disk. The main reason of the moment is the coupling effect between focus driving system and tracking driving system. This paper analyzed tut quantity due to focusing and tracking force through coupled fields analysts with electromagnetic analysis and structural analysis.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.560-560
• /
• 2012

We report a one-step fabrication method of Poly(9,9-dioctylfluorene) (PFO) nanowire array with pronounced ${\beta}$-Phase. We use liquid-bridge-mediated nanotransfer molding (LB-nTM) which is a new direct nano-patterning method based on the direct transfer of various materials from a mold to a substrate via liquid layer. The formation of the ${\beta}$-phase morphology in the resulting PFO nanowire array was evidenced by the presence of an absorption peak at 435nm. With the collection polarizer oriented parallel to the wire long axis, the PL emission was most intense and an emission dichroic ratio, DRE, of 3.7 was determined. The nanowire array have been investigated by scanning electron microscopy (SEM). Also, we simply fabricated structure of device of ITO/PFO nanowire arrays/Al and the electroluminescence spectra were recorded at various applied voltage.

• 자원환경지질
• /
• 제30권3호
• /
• pp.231-240
• /
• 1997

The behavior of rocks and microcrack development due to fatigue stresses are investigated using cyclic loading tests and ultrasonic velocity measurements. Twenty six medium-grained granite samples from the Pochon area are selected for measurements. Ultrasonic velocities are measured for samples before fatigue test to characterize the pre-existing microcracks. Then, thirteen different cycles of loadings with 70% and 80% dynamic strength are applied to the samples. The ultrasonic velocities are measured again to compare velocities after applications of fatigue stress with those before applications of fatigue stress. The results show that most microcracks are developed along the direction parallel to the axis of loading and that the amount of microcracks increases, as loading levels and numbers of cycle increase.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2002년도 정기총회 및 학술대회
• /
• pp.297-301
• /
• 2002

본 논문에서는 신호처리를 이용한 평행축 입체 카메라의 주시각 제어 방법을 제시한다. 평행축 입체 카메라는 양안식 입체 카메라 중 가장 간단하게 만들 수 있는 장점이 있는 반면에, 좌, 우 영상센서 사이의 거리가 일정하게 고정되어 있어, 물체의 거리 변화에 따른 입체 영상 시차 조절 기능인 주시각 제어 기능이 없다는 단점이 있다. 영상 센서 (CCD) 와 렌즈를 분리하고 영상 센서가 평행하게 수평으로 움직이며 주시각을 제어하도록 하는 수평 이동축 입체 카메라는 평행축 입체 카메라의 단점을 보완할 수 있지만, 실제 구현에 많은 어려움이 있다. 본 논문에서는 주시각 제어를 위한 CCD의 이동은 실제 영상에서 피사체의 이동으로 나타난다는 사실을 이용하여, 평행축 입체 카메라로 얻은 영상에서, CCD의 이동으로 인해 사라지는 부분만큼 제거하고 영상의 수평 수직 방향에서 원래 영상의 크기로 복원하기 위해 보간하는 과정을 통해 주시각 제어를 구현한다. 제안된 방법을 통해 얻어진 실험 결과는 CCD의 이동량에 따라서 화질의 열화 정도가 다르게 나타남을 보여 주지만, 실제 시스템에서 CCD의 이동량은 크지 알기 때문에 화질 열화를 거의 느끼지 않으면서 주시각이 제어된 입체 영상을 얻을 수 있음을 보여준다.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권2호
• /
• pp.58-63
• /
• 2008

This paper describes aerodynamic performance enhancement of cycloidal rotor according to the blade pivot point movement and the blade preset angle adjustment. Cycloidal blade system which consists of several blades rotating about an axis in parallel direction and changing its pitch angle periodically, is a propulsion mechanism of a new concept vertical take off and landing aircraft, cyclocopter. Based on the designed geometry of cyclocopter, numerical analysis was carried out by a general purpose commercial CFD program, STAR-CD. According to tills analysis, the efficiency of cycloidal rotor could be improved more than 15% by the introduced methods.

• Applied Microscopy
• /
• 제1권1호
• /
• pp.27-34
• /
• 1969

The compound eyes of the adult Drosophila melanogaster were. fixed in 1.25 per cent glutaraldehyde and 1 per cent osmium tetroxide buffered with sodium cacodylate at pH 7.2. Double fixed specimens were dehydrated using the alcohol series and embedded in Epon 812. They were sectioned with porter blum and JUM 5B ultra-microtome and then stained with lead hydrooxide and uranyl acetate. All thin sections were examined with Hitachi HS-7 or HU-11 electron microscope. The rhabdomere of the compound eye is composed of numerous microvilli packed, arranged, and projected from inner edge of each retinal cell. Each microvillus consisted of a centrum, about $82{\AA}$ in diameter, surrounded by the substances, about $105{\AA}$ in width, which were bounded with double membrane about $44{\AA}$ in thickness. In each inner edge of the microvilli, there was a cylinder, about $175{\AA}$ in diameter, in parallel with retinal cells, which contained a cylindrical axis about $583{\AA}$ in diameter. The surface of the outer edges .of .the microvilli was bounded with reticullar substances about $500{\AA}$ in thickness.

• Journal of Magnetics
• /
• 제13권4호
• /
• pp.153-156
• /
• 2008

We conducted a micromagnetic modeling study to investigate the spin torque oscillator (STO) using a perpendicular polarizer. We used an additional layer of negative anisotropy constant materials (NAM) on a conventional STO. For the NAM layer, the magnetic easy plane is parallel to the in-plane easy axis of the free layer, and inhibits the development of the out-of-plane component of the magnetization in the free layer. As a result, this new type of STO provides a high frequency limit up to 50 GHz.

• 한국세라믹학회지
• /
• 제31권3호
• /
• pp.249-256
• /
• 1994

By surface structure and X-ray topographic observation, growth mechanism of NAB single crystal grown by TSSG technique using a BaB4O7 flux was studied. Surface structure of grown crystals were investigated by optical microscope. Growth history and crystal defects included within grown crystal were investigated using X-ray topography. The {001} faces were grown by 2-D nucleation growth. As decreasing cooling rate, growth mechanism of {111} and {11} was changed from 2-D nucleation growth to the growth by screw dislocation. Only surface striations developed parallel to a-axis were observed on {010} faces. Growth sector of NAB crystals were divided into {001}, {111}, {010}, {021}, {11}. The inclusion which was usually trapped between {001} faces was investigated.

• The Journal of the Acoustical Society of Korea
• /
• 제17권1E호
• /
• pp.70-75
• /
• 1998

The analysis of dynamic responses are carried out on several anisotropic systems due to buried pulsating line sources. These include infinite, semi-infinite spaces. The media possess orthotropic or higher symmetry. The load is in the from of a normal stress acting with parallel to symmetry axis on the plane of symmetry within the materials. The results are first derived for infinite media. Subsequently the results for semi-infinite are derived by using superposition of the solution in the infinite medium together with a scattered solution from the boundaries. The sum of both solutions has to satisfy stress free boundary conditions, thereby leading to the complete solutions. The solutions are simplified to the systems possessing of higher symmetry, such as orthotropic, transversely isotropic, cubic, and isotropic symmetry.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1099-1100
• /
• 2006

The mechanical properties of ceramics materials can be tailored by designing their microstructures. We have reported that development of texture can be controlled by slip casting in a strong magnetic field followed by heating even for diamagnetic ceramics such as alumina. A strong magnetic field of 12T was applied to the suspension indcuding alumina powder to rotate each particle during slip casting. The sintering was conducted at the desired temperature in air without a magnetic field. C-axis of alumina was parallel to the magnetic field. Bending strength of textured alumina depended on the direction of oriented microstructure.