• 한국인터넷방송통신학회논문지
• /
• 제10권5호
• /
• pp.237-244
• /
• 2010

본 논문에서는 CATR(Compact Antenna Test Range)을 위한 반사경 시스템으로 파라볼릭 원통형 복반사경 시스템을 해석하였다. 시험영역의 근접전계는 물리광학법(Physical Optics)을 적용하여 계산하였다. CATR은 균일한 평면파 제공을 위하여 최소한의 진폭과 위상 리플(ripple)을 가져야 하며 교차편파 또한 작아야 한다. 따라서 본 논문에서는 부반사경의 위치와 시험영역의 위치에 따른 근접전계 패턴을 구하여 전계의 리플, 테이퍼와 교차편파를 고찰하였다. 본 논문의 해석결과는 파라볼릭 원통형 복반사경 시스템으로 구성된 CATR 설계에 충분히 이용될 수 있을 것으로 생각된다.

• 한국전자파학회논문지
• /
• 제27권8호
• /
• pp.766-773
• /
• 2016

본 논문에서는 항공기 탑재 회전 방향탐지용 소형 옵셋 파라볼릭 반사판 안테나를 제안한다. 반사판 안테나의 급전부로는 초광대역 특성을 보유하며, $45^{\circ}$ slant 선형 편파를 갖는 LPDA 안테나를 적용하였다. 반사판은 고이득과 항공기 동체 배면 탑재를 위해 파라볼릭 형상을 기준으로 크기를 소형화시켰으며, 고각 기준으로 $5^{\circ}$ 기울어지게 설계되었다. S 대역에서 Ka 대역까지 20:1의 초광대역 구간에서 제안된 안테나의 평균 이득은 27.97 dBi, 평균 반전력 빔폭은 방위각 $4.55^{\circ}$, 고각 $4.3^{\circ}$로 측정되어 펜슬 빔(pencil beam)의 방사패턴을 가지며 시뮬레이션 결과와 유사함을 확인하였다. 설계된 안테나는 제한된 영역 내에 장착되는 소형의 옵셋 파라볼릭 반사판 안테나로서 원하는 초광대역과 고이득 특성을 확보하여 항공기에 탑재되는 회전 방향탐지 안테나 시스템에 적용 가능할 것으로 판단된다.

• 한국항행학회논문지
• /
• 제21권5호
• /
• pp.466-471
• /
• 2017

SOTM(satellite communication on the move)는 이동 중 위성통신을 하기 위한 장치이다. 차량이나 무인항공기 외부에 장착하는 물체의 크기 및 중량 제한으로 SOTM 용 안테나의 소형화가 필요하며, 이를 위하여 마이크로스트립, 도파관, 어레이 안테나 등 다양한 형태의 안테나에 대한 연구가 진행되고 있다. 이러한 안테나들은 구조적으로 편파 조정이 어렵다는 문제점이 있어 본 논문에서는 파라볼라 안테나 형태를 사용하여 연구를 진행하였으며, 안테나의 소형화를 위하여 일반적인 원형 형태의 파라볼라 안테나의 반사면을 상하로 잘라 크기 및 높이를 감소시켰다. 그로 인하여 입사된 전자파를 받아들일 수 있는 반사면의 면적이 줄어들어 이득의 저하 및 Spill-over로 인한 G/T지수의 감소로 수신안테나의 성능이 저하하게 되며, 이러한 문제점을 해결하기 위하여 본 논문에서는 부 반사면의 형태를 변형하여 안테나의 면적대비 효율 및 이득을 향상시킬 수 있는 형태로 설계하였다.

• KIEAE Journal
• /
• 제2권3호
• /
• pp.33-38
• /
• 2002

The intermediate range of temperatures($100{\sim}300^{\circ}C$) which can be achieved with CPCs(Compound Parabolic Concentrators) without tracking device provides both economic and thermal advantages for solar collector design. The present paper summarizes critical design considerations for CPC with cylindrical absorber and its optical performance using ray tracing program. Concentration ratios vary as acceptance half angle, ratio of reflector height to aperture width and ratio of reflector area to aperture area. This effects showed that the concentration ratio was increased as acceptance angle but optimum ratio of reflector height to aperture width existed at critical value. As a result of ray tracing, solar ray losses was maximized at acceptance half angle and this problem was solved by increasing absorber tube diameter. The concentrating flux distribution on the absorber surface was uniform but peak flux existed.

• Korean Journal of Acupuncture
• /
• 제27권4호
• /
• pp.1-4
• /
• 2010

Objectives : The purpose of this study is to summarize the historical aspects of parabolic reflector moxa and to suggest the applications of light moxibustion in Korean medicine. Results : Getting a fire by parabolic reflector(concave mirror) is well known because of the Olympic torch lighted with a solar reflector in Greece. From anecdotes or myths for Diocles and Archimedes(third century B.C.) a long history has been chronicled in books and films in western culture. However, it has another history in Asian countries since 2,000 years ago. Some reflectors had a tiny size with 6.5 to 10 cm in diameter, 4 mm to 1 cm thickness, and these mobile handheld devices could make us guess that they have been used for multiple purposes. Bronze reflectors were described in Dongeui-bogam, and excavated from the ancient remains of the Shilla and Koryo dynasties. This common firing device was used as a moxibustion device, one of the acupuncture and moxibustion modalities in traditional Korean medicine. Conclusions : Reflector moxa has been used as a light moxibustion to deliver heat energy to acupuncture points, muscles, and skin along meridians. We present a plausible proposal to improve other phototherapy modalities including reflector moxa in Korean medicine practice.

• 한국전자통신학회논문지
• /
• 제12권6호
• /
• pp.989-996
• /
• 2017

제안된 지향성 펜슬빔 안테나는 절곡된 타원 도체평판을 갖는 도파관 급전부와 포물형 곡면 반사판으로 구성되어 있다. 반사판 뒤에서 삽입된 급전 도파관의 종단 부근 광벽에 위치한 두 개의 사각형 개구는 반사판 초점에 위치하며, 절곡된 타원 평판으로 전자파 에너지를 방출시킨다. 이 평판은 전자파 에너지를 일차 반사시키며, 주 반사판을 향하도록 설계되어 있다. 도파관 종단에 위치한 두 사각형 개구는 안테나 시스템의 임피던스 정합을 위해서 안쪽으로 돌출된 탭을 가지는데, 탭의 형태는 잘려진 타원형이다. 제안된 포물형 반사판 안테나의 반사판의 직경은 400 mm, 촛점은 134.23 mm 이며, 사용 중심주파수 16.5 GHz에서 안테나이득은 33.68 dBi, 3 dB 빔폭은 $3.3^{\circ}$, 반사손실 -15 dB 사용대역폭은 1.0 GHz 이상이 되도록 설계하여, HFSS-IE를 사용하여 검증하였다.

• 한방안이비인후피부과학회지
• /
• 제23권3호
• /
• pp.78-83
• /
• 2010

Objectives : The purpose of this study is to compare the principles between moxibustion and the 'Intense pulsed light (IPL)' and to investigate the clinical application of the photo-moxa for the Korean medicine fields. Methods : The characteristics of moxibustion, IPL, parabolic reflector moxa and the dermatology surgical use of moxibustion were reviewed in the literature. Results : IPL is one type of light treatments that is employed by radiating the short-pulse wave, which is transformed from the light of high intensity. There has been used parabolic reflector in Asia for more than 2,000 years, and this hand-held device used for moxibustion in traditional medicine. Moxibustion is one of the treatment tools in Korean medicine using the heat energy. The fluence or energy density of IPL in clinical circumstances is similar to parabolic reflector moxa of moxibustion. IPL and parabolic reflector moxa shared same treatment principle employing the heat energy. Therefore IPL could apply for many indications in Korean medicine as a moxibustion tool and acupuncture. Conclusions: IPL may be plausible to be a fascinate method in phototherapy of Korean medicine.

• 전자공학회논문지A
• /
• 제32A권1호
• /
• pp.36-44
• /
• 1995

For a parabolic reflector antenna, a simple method is presented for computing efficiently the average power pattern degradations caused by the surface roughness of the reflector and misalignments between the reflector and the feed. In this procedure, both nonuniform surface errors and nonuniform illuminations are employed. The assumptions to derive the expressions are that in each annular region of the antenna, the rms value of the surface roughness is known, and in a zone in a annular region, the phase error by misalignments is constant, and can be taken to its value at the center of the zone. Detailed parametric studies are performed with derived expressions to determine the effects of those errors and illumination tapers on parameters such as gain and sidelobe levels.

• Advances in Energy Research
• /
• 제8권3호
• /
• pp.155-163
• /
• 2022

The current study presents experimental research on a parabolic trough collector with tube and cavity receivers. The primary concentrating parabolic reflector is designed for an aperture area of 2×2 m² with mirror-polished stainless steel sheet reflectors. The cavity receiver consists of a compound parabolic secondary reflector and a copper tube. Both the conventional tube receiver and the cavity receiver tube are coated with black powder. The experiments are carried out to compare the efficiency of the cavity receiver with the tube receiver for fluid temperature rise, thermal efficiency, and overall losses. The experiments showed significantly higher fluid temperature rise and overall efficiency and lower thermal losses for the cavity receiver compared to the tube receiver within the parameters explored in this study.

• Transactions on Electrical and Electronic Materials
• /
• 제16권4호
• /
• pp.201-205
• /
• 2015

This paper dealt with the condensing technology of an LED light source that uses a parabolic reflector to replace a searchlight equipped with a xenon lamp. A ray-tracing simulation was conducted to analyze the influence of the diameter of the reflector and the size of the light source on light condensing. The combination of a parabolic reflector with a diameter of 620 mm and a focal distance of 220 mm, and a 9 mm multi-chip package (MCP) with a luminous flux of 7,000 lm showed the narrowest beam angle. The luminous intensity at the center was measured at 7.7×10⁶ cd. The distance between the light source and the point where the illuminance was 1 lx was calculated to be 2.8 km. The power consumption of the system was 95 W, which is only 9.5% of that of the 1 kW xenon searchlight, and the beam angle was 1.03°. In a site experiment, it was confirmed that the light ray reflected from the LED searchlight proceeds forward without any diffusion because of the narrow beam angle.