• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.4
• /
• pp.58-68
• /
• 1999

This experiment was to investigate decoloization characteristics of E1 effluents from the bleaching plant of pulp mill with three white-rot fungi(Trametes versicolor, Ganoderma appanatum and Pleurotus ostreatus).In addition, the effect of carbon and nitrogen resources was discussed on its decolorization. The color removal of E1 effluent during shaking and stationary cultures were 72% and 80%, respectively. Stationary culture was more effective on decolorization of E1 effluent compared to the shaking culture. The optimum inoculum weight was 1.0g based on dry weight of mycelia . The decolorization medium I showed 88% of the color removal of E1 effluent with in one day cultivation of T.versicolor and P.ostreatus . Color removal was increased from 87% to 90%. T.versicolor and P.ostreatus by the addition of 0.5% glucose. By addition of nitorgen sources(ammonium sulfate and ammonium choride), medium was much higher than that of carbon source. With 0.1% ammoniumm sulfate, P.ostreatus and T.versicolor showed 94% and 92% of the color removal within one day of cultivation , respectively. On decolorization medium II, T.versicolor and P.ostretus were 94% of oclor removal with addition of carbon source. The addition of nitrogen source was much more efficient than that of carbon source. With 0.1% amminium chloride, T.versicolor and P.ostreatus showed 95% of its color removal . The decolorization medium II was higher color removal than medium I, and also MnP and laccase were produced. However, the decolorization medium I produced a little MnP and laccase activity. It could be suggested that MnP and laccase may play an important role in decolorization of E1 effluent.

• Journal of the Korean Chemical Society
• /
• v.19 no.4
• /
• pp.258-268
• /
• 1975

The physical and chemical characteristics of solid organic wastes from paper and pulp industries, tanneries, and food processing industries were studied with regard to fertilizer value as well as humus sources as a rational method of waste utilization. The pulp and paper mill wastes containing low mineral nutrients but high lignin may be utilized for soil amendments through humus preparation. Chemical treatment sludges of tannery wast water contained appreciable fertilizer nutrients andiliming materials, but utilization as fertilizers or soil amendments depends on the pollution effect of high chromium content, which has not been well understood. Food processing wastes may be utilized as organic fertilizers or micronutrient sources for plant. Some wastes containing high water-soluble sugars or lower C/N ratio than 20 may be utilized as additives for rapid humus preparation.

• Textile Coloration and Finishing
• /
• v.30 no.1
• /
• pp.51-61
• /
• 2018

In this study, effluent water was produced through Submerged Membrane Bio-Reactor(SMBR) process, which is a simple system and decomposes organic matter contained in wastewater with biological treatment process and performs solid-liquid separation, Especially, ozone oxidation treatment process is applied to effluent water containing fluorescent whitening agent, which is a trace pollutant which is not removed by biological treatment, and influences the quality of reused water. The concentration of $COD_{Cr}$ in the SMBR was $449.3mg/{\ell}-COD_{Cr}$, and the concentration of permeate water was $100.3mg/{\ell}-COD_{Cr}$. The removal efficiency was about 70.1%. The amount of ozone required for the removal of the fluorescent whitening agent in the permeated water in SMBR was $6.67g-O_3/min$, and the amount of ozone required to remove $COD_{Mn}$ relative to the permeate water was calculated to remove $0.997mg-COD_{Mn}$ for 1mg of $O_3$.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.295-303
• /
• 2006

The pulp yield was improved by about 4.5-5% when polysulfide (PS) and anthraquinone (AQ) were added to the kraft cooking liquor (white liquor). The exchange of the black liquor with fresh white liquor further increased the yield. The highest pulp yield was obtained when the PS cooking liquor containing 70% of total active alkali (AA) and 100% of AQ was used from the beginning of the reaction and the black liquor was exchanged with fresh white liquor containing the residual 30% of AA just after temperature reached $135^{\circ}C$. There was a good correlation between kraft pulp yields of a hardwood species and the ratios of the amount of xylose to glucose (X/G ratio), liberated by an acid hydrolysis of the pulps. However, the correlation was dependent on raw material wood species. Therefore, it is required in advance to establish a correlation between the yields and X/G ratios for raw material wood species of a target pulp in order to estimate pulp yield using X/G ratio. The X/G ratios of relatively high yield pulps showed higher values than those expected from the correlation. In a mill trial, the superiority of the PS-AQ isothermal cooking (ITC) process over the kraft ITC process was confirmed by examining X/G ratio of pulps obtained. The pulp yield in the PS-AQ ITC process was estimated at about 57.0%. This yield is very high, which indicates that reaction conditions of the PS-AQ ITC process are optimal.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.2 no.2
• /
• pp.19-29
• /
• 1994

A large volume of paper mill sludge(PMS) is produced every day from paper industries after treatments of waste water and it costs too much to dispose of the sludge. Since PMS consists mostly of biodegradable organic matter, cellulose, it is desirable to recycle it by proper treatments such as composting. In this study, experiments were conducted using a small scale reactor(12l) to establish optimum conditions for efficient composting of PMS of which initial pH, C/N ratio, and moisture content were 7.1, 28~30, and 60~65%, respectively. No heavy metals such as mercury, cadmimum, and lead were not detected in the PMS. Various levels of forced aeration, 1 minute aeration per every 30, 60, 120, 240, and 480 minutes were applied and 1 minute aeration per 60 and 120 minutes found to be proper for composting of 8l PMS in this system. Relationship between $CO_2$ production and temperatures was positively correlated with r> 0.82 suggesting that the normal decomposition of PMS by microorganisms occurred. However, under the condition of aeration interval over than 240 minutes, a negative relationship between two parameters was found indicating the occurrence of abnormal(maybe anaerobic) degradation. The amount of added nitrogen also affected composting of PMS resulting in the increase of $CO_2$ production and temperature. Semi-field tests using 100kg PMS in a static pile sysem showed that PMS could be composted efficiently under optimal environmental conditions. The parameters determining efficiency of composting such as C/N ratio, aeration, moisture content, and pH need to be monitored.

• Korean Journal of Agricultural Science
• /
• v.22 no.2
• /
• pp.143-150
• /
• 1995

In order to find a way to utilize paper mill sludge, its composting was conducted with anaerobic waste of kraft paper sludge, raw kraft paper sludge, and CMC sludge(CMC : Sodium Carboxymethylcellulose) under aerobic condition at $50^{\circ}C$. It took 3 days for initial fermentation with anaerobic waste and CMC sludge, and six days with raw kraft paper sludge. Each compost was applied to radish(Rhaphanus Stativus L.), and absorption rate of staple nutrients increased 6.7~9.3 times higher in N, 17~21 times in P and 2~3 times in K than control at the harvesting stage. Also, organic matter contents were increased 1.5~2.3 times 4.5~5.3 times in CEC compared to control soil.

• Journal of Powder Materials
• /
• v.15 no.5
• /
• pp.371-377
• /
• 2008

This paper deals with the phase analysis of $MgB_2$ bulk using spark plasma sintering process after ball milling. Mg and amorphous B powders were used as raw materials, and milled by planetary-mill for 9 hours at argon atmosphere. In order to confirm formation of $MgB_2$ phase, DTA and XRD were used. The milled powders were fabricated to $MgB_2$ bulk at the various temperatures by Spark Plasma Sintering. The fabricated $MgB_2$ bulk was evaluated with XRD, EDS, FE-SEM and PPMS. In the DTA result, reaction on formation of $MgB_2$ phase started at $340^{\circ}C$. This means that ball milling process improves reactivity on formation of $MgB_2$ phase. The $MgB_2$ MgO and FeB phases were characterized from XRD result. MgO and FeB were undesirable phases which affect formation of $MgB_2$ phase, and it's distribution could be confirmed from EDS mapping result. Spark Plasma Sintered sample for 5 min at $700^{\circ}C$ was relatively densified and it's density and transition temperature showing super conducting property were $1.87\;g/cm^3$ and 21K.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.204-208
• /
• 1991

In this paper, the radiation properties of a far-Infrared using a PTC thermistor, the $BaTiO_3$+1.63mol% $Al_2O_3$+3.75mol% $SiO_2$+1.25mol% $TiO_2$(1/3 $Al_2O_3+xSiO_2$+(1-x) $TiO_2$; total x: 6.67mol%) ceramics, in order to progress the grade resistivity characteristics, by adding an ethanol solution of $Mn(NO_3){\cdot}6H_2O$ was investigated. The ceramics was fabricated by wet-mill method. The sintering temperature read 1300-1350$[^{\circ}C]$ and the holding time was 3 hours. The quantity of $Sb_2O_3$ and $Al_2O_3$ for an activation of the far-infrared radiation in ceramics was doped. In sintering, R-T property was measured by varying the grade temperature. The anatase-lighting apparatus and microstructures by using XRD and SEM were observed. $Sb_2O_3$. oxides additive. affected the semiconducting and emissivity and MnO was devoted an increase of resistivity. The specimen which only $Sb_2O_3$ is added to was high appeared far-infrared emissivity and Mno was not affacted the far-infrared radiation. The ceramics shows that it is effective in the structure of the human bodies as organic bodies and can be applied as electron device.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.2
• /
• pp.215-226
• /
• 2005

In this study, we investigated the emission concentrations of 31 odorous compounds from various emission sources of 37 individual companies located within the Ban Wal industrial complex of Ansan city, Korea. In the course of our study, we attempted to evaluate emission characteristics of different industrial activities and relative significance of different odorous components . Based on our measurements of odorous compounds, we were able to find a line of evidence to draw a conclusion that a number of odorous compounds can be used as indices to specifically point out the influence of certain industrial activities. It was found that hydrogen sulfide and trimethyl amine record the highest contribution from leather industry. Likewise, acetaldehyde showed its maximum contribution from food-beverage sector, while ammonia for paper-mill, pulp production sector. On the other hand, the results of styrene and most YOC including BTEX were not useful, as their concentrations were not significantly high enough to judge from such respect.

• Journal of Powder Materials
• /
• v.9 no.6
• /
• pp.441-448
• /
• 2002

Dispersions of non-soluble ceramic particles in a metallic matrix can enhance the strength and heat resistance of materials. With the advent of mechanical alloying it became possible to put the theoretical concept into practice by incorporating very fine particles in a flirty uniform distribution into often oxidation- and corrosion- resistant metal matrices. e.g. superalloys. The present paper will give an overview about the mechanical alloying technique as a dry, high energy ball milling process for producing composite metal powders with a fine controlled microstructure. The common way is milling of a mixture of metallic and nonmetallic powders (e.g. oxides. carbides, nitrides, borides) in a high energy ball mill. The heavy mechanical deformation during milling causes also fracture of the ceramic particles to be distributed homogeneously by further milling. The mechanisms of the process are described. To obtain a homogeneous distribution of nano-sized dispersoids in a more ductile matrix (e.g. aluminium-or copper based alloys) a reaction milling is suitable. Dispersoid can be formed in a solid state reaction by introducing materials that react with the matrix either during milling or during a subsequent heat treatment. The pre-conditions for obtaining high quality materials, which require a homogeneous distribution of small dis-persoids, are: milling behaviour of the ductile phase (Al, Cu) will be improved by the additives (e.g. graphite), homogeneous introduction of the additives into the granules is possible and the additive reacts with the matrix or an alloying element to form hard particles that are inert with respect to the matrix also at elevated temperatures. The mechanism of the in-situ formation of dispersoids is described using copper-based alloys as an example. A comparison between the in-situ formation of dispersoids (TiC) in the copper matrix and the milling of Cu-TiC mixtures is given with respect to the microstructure and properties, obtained.