• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 추계종합학술대회
• /
• pp.634-637
• /
• 2000

A diagnosis system that provides early warnings regarding machine malfunction is very important for rolling mill so as to avoid great losses resulting from unexpected shutdown of the production line. But it is very difficult to provide early warnings in rolling mill. Because dynamics of rolling mill is non-linear. This paper shows a chaotic behaviour of vibration signal in rolling mill using embedding method. Not only phase plane and Poincare map are implemented but also FFT and histogram of vibration signal in rolling mill is presented by embedding method.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.374-377
• /
• 2001

회전체 베어링 상태진단에 신뢰성을 갖기 위하여 여러 가지 진단 방법이 연구되고 있으며, 이때 이용하는 변수는 온도와 소음, 진동 그리고 윤활유가 있으며 분석 방법으로는 온도추이분석, 소음분석, 진동분석, 윤활제 분석방법이 주로 이용되고 있다. 본 연구에서는 압연기 베어링의 상태진단의 변수로 베어링의 진동 신호를 선택하고 이 진동신호에서 비선형성이 강한 신호 즉 카오스적 거동이 있음을 타켄스의 매립법과 포엔카레 단면을 이용하여 확인하였다.

• 한국정보통신학회논문지
• /
• 제4권4호
• /
• pp.759-765
• /
• 2000

생산라인의 예기치 않은 운전정지로부터 손실을 피하기 위한 기기의 조기 경보 체제인 고장 진단 시스템은 매우 중요하다. 베어링은 베어링 자체가 비선형이기 때문에 초기에 베어링의 이상 진단을 행한다는 것은 매우 어렵다. 본 연구에서는 압연기 베어링의 상태진단의 변수로 베어링의 진동 신호를 선택하고 이 진동신호에서 비선형성이 강한 신호 즉 카오스적 거동이 있음을 FFT, 타켄스의 매립법과 포엔카레 단면을 이용하여 확인하였다.

• 한국농공학회지
• /
• 제34권3호
• /
• pp.75-84
• /
• 1992

The paper manufactories in Sangpyeong Industrial Estates, Chinju, produce more than 80 tons of paper-mill sludge cakes every day, which costs about 840 million won for dump per year. Since the paper-mill sludge is biodegradable, the sludge can he utilized as an organic fertilizer if it is properly decomposed. This may lead to not only dramatic cut of the treatment cost but prevention from secondary environmental contamination due to dump. The primary objective of the study was to explore the quantitative range of major enviromental parameters influencing early composting of paper-mill cakes, naturally pretreated in warn and cold weather. The automatically-controlled reactor was designed, manufactured, and operated for nine days to decompose about 2201 of raw sludge cakes. Four tests(Test 1-Test 4) were implemented for the study of Phase I. Treatments of two levels of initial temperature (40˚C and 28˚C) and two levels of water content + C/N ratio (35% + 40 and 63% + 80) were made to test the significance of their parameters for decomposition of raw sludge cakes pretreated in warm weather. Another four tests (Test 5- Test 8) were implemented for the study of Phase II. Treatments of initial temperature and water content(W/C) + C/N ratio of raw sludge pretreated in cold weather were made to 16˚C and 13% +58 for Test 5, 6˚C and 53% +55 for Test 6, 7˚C and 36% +81 for Test 7, 31˚C and 30% +81 for Test 8. Natural weater condition(pretreatment condition) revealed the importance m composting of the paper-mill sludge cakes. Combination of water content adjustment to about 30% with C/N ratio amendment of about 20 and initial temperature of 30~40˚C was concluded to be the best for early composting of paper-mill sludge cakes with aeration rate and pH fixed. Temperature and C/N ratio were adapted as judging variables for composting degree. In addition, tests for microbial activity were performed to validate the experimental results. Since the temperature and C/N ratio did not coincide in some tests as judging variables for the maturity of the composting sludges, taking one of these parameters could mislead the concept of the maturity (composting conceptually new criterion to provide more reliable information for early composting of paper-mill sludge cakes.

• 한국소음진동공학회논문집
• /
• 제21권3호
• /
• pp.199-205
• /
• 2011

This paper proposes a framework to predict the mechanical fault of hot rolling mill system (HRMS). The optimum process of HRMS is usually identified by the rotating velocity of working roll. Therefore, observing the velocity of working roll is relevant to early know the HRMS condition. In this paper, we propose the framework which consists of two methods namely spectrum matrix which related to case-based fast Fourier transform(FFT) analysis, and three dimensional condition monitoring based on novel visualization. Validation of the proposed method has been conducted using vibration data acquired from HRMS by accelerometer sensors. The acquired data was also tested by developed software referred as hot rolling mill facility analysis module. The result is plausible and promising, and the developed software will be enhanced to be capable in prediction of remaining useful life of HRMS.

• 한국산업융합학회 논문집
• /
• 제4권4호
• /
• pp.365-369
• /
• 2001

This paper presented a new model of virtualized CNC milling machine. The model verifies the over cut, the under cut and the surface roughness using NC file generated from CAM and cutting condition. The model uses Z-map model to verify workpiece. In this paper, the model used the velocities of x, y and z direction and obtained a center point of a hall end mill for modeling Z-map of workpiece. To investigate the performance of the model, simulation study was carried out. As the results, the model gave geometry accuracy of workpiece, the surface roughness and the chip loads in finish cutting that can predict tool chipping. The virtualized CNC machine can he used a flat end mill, a ball end mill and a rounded end mill.

• 펄프종이기술
• /
• 제34권3호
• /
• pp.32-37
• /
• 2002

The paper mill wastewater actually generating bulking was used to apply to the spot. Batch and continuous type pilots were used in this study. Optimal time after propagating generation of activated sludge in aeration basin by adding Hoc forming microorganism was 24 and 36hours while optimal time of activated sludge in original aeration basin was 60hours. Showing the difference of sedimentation velocity at 7th day after operating a pilot continuously, SV30 was decreased to 50% at 13th day. COD value in aeration basin with floe forming microorganism was 35mg/L while COD value in original aeration basin was 52mg/L. It was indicated that application of Hoc forming microorganism can control the bulking of paper mill wastewater by shortening of recovery time and improving of pollution removal efficiency.

• 한국정보통신학회논문지
• /
• 제4권5호
• /
• pp.951-961
• /
• 2000

압연기의 기계적인 이상을 사전에 알아내는 압연기 베어링 고장-진단 시스템은 예측하지 못하는 압연 공정의 중단으로 인하여 발생하는 큰 피해를 사전에 막기 위해서 매우 중요한 시스템이다. 그러나 압연기의 동적 거동은 비선형 특성이 매우 강하기 때문에 압연기에서 사전에 고장 예측 정보를 제공하는 것은 매우 어렵다. 본 논문에서는 웨이브렛을 이용한 압연기의 고장 진단 방법을 제안하였으며 제안된 방법은 온라인으로 압연기에서 진동 신호를 실시간으로 측정하여 웨이브렛을 이용하여 패턴을 분석하고 분석된 결과로부터 고장 특징 정보를 얻었다. 얻어진 데이터를 이용하여 압연기 베어링을 진단하는 뉴로 퍼지 모델을 설계하고 수치적인 시뮬레이션을 통하여 그 타당성을 입증하였다.

• 대한기계학회논문집A
• /
• 제27권8호
• /
• pp.1287-1294
• /
• 2003

The wear process of end mill is so complicated process that a more reliable technique is required for the monitoring and controlling the tool life and its performance. This research presents a new tool wear monitoring method based on the sound signal generated on the machining. The experiment carried out continuous-side-milling for 4 cases using the high-speed-steel end mill under wet condition. The sound pressure was measured at 0.5m from the cutting zone by a dynamic microphone, and was analyzed at frequency domain. As the cutter impacts the workpiece surface, a situation of farced vibration arises in which the dominant forcing frequency is equal to the tooth passing frequency of the cutter. The tooth passing frequency appears as a harmonics form, and end mill flank wear is related with the first harmonic. It is possible to detect end . mill flank wear. This paper proposed the new method of the end mill wear detection.

• 한국정보통신학회논문지
• /
• 제5권2호
• /
• pp.315-320
• /
• 2001

본 논문은 뇌운의 접근에 따라 변화하는 대지전장 측정을 위하여 필드 밑을 이용한 대지전장 측정장치의 개발에 관하여 기술하였다. 필드 밀은 두 개의 절연된 전극으로 구성되며, 회전전극과 고정 전극이 있다. 고정도 필드 밀 개발을 위하여 회전형 필드 밀의 원리 및 설계기법에 관하여 연구하였으며, 교정실험장치로 원통형 가드전극계 및 평행평판 전극계의 두 가지 방법을 이용하여 주파수 대역 및 응답감도 특성을 조사하였다. 교정 실험결과로부터 주파수 대역 및 응답감도는 DC ~ 200(Hz), 0.267[mV/V/m]로 얻어졌으며 73[V/m] ~ 18.7[㎸/m] 범위의 대지전장 변화의 측정이 가능하다.