• 제목/요약/키워드: Paper-made

검색결과 13,076건 처리시간 0.042초

18세기 서화유물 배접지의 특성(제1보) - 배접지의 원지 특성 및 해부학적 특성 - (Characteristics of the Lining Papers Separated from the 18th Century Paintings and Calligraphic Works (Part 1) - Physical and Morphological Properties of Lining Papers -)

  • 정희원;이상현;천주현;최태호
    • 펄프종이기술
    • /
    • 제44권3호
    • /
    • pp.22-33
    • /
    • 2012
  • This study was carried out to investigate the characteristics of the lining papers which had been separated from six pieces of paintings and calligraphic works of the 18th and the 20th century. A total 20 kinds of lining papers were examined on the physical properties, colors, fiber morphology, and color reactions. The grammage and thickness of lining papers which had been used hanging-scroll type works were higher than those of folder types. On the other hand, the grammage and thickness of the first layer lining papers which had been separated from silk ground works were lower than those of paper ground works. All kinds of lining papers were colored from yellow to yellowish red because of unbleaching and deterioration. Through the examination on fiber morphology and color reactions, lining papers were verified that all of those were made from paper mulberry bast fiber but the first layer of the Mukjukdo. The lining paper which of the first layer of the Mukjukdo was verified that it was made from mixture of paper mulberry, hemp, and spruce pulps.

"고사십이집(攷事十二集)"의 조리가공에 관한 분석적 연구(2) (A Study on the Cooking in 'The Kosa-sibi Jip' (2))

  • 김성미
    • 동아시아식생활학회지
    • /
    • 제4권3호
    • /
    • pp.1-19
    • /
    • 1994
  • In this paper, twenty-five kinds of food presented in Sooljip(戌集) 5 and 6 of Food collections of 'Kosa-sibi Jip(攷事十二集)' have been classified into four : Staple food, subsidiary food, Tuck(rice cake) and Han-gwa(Korean confectionery), and Tang-jng and tea. Cooking processes have been examined and scientifically analyzed in terms of cooking, Fourteen kinds of Jook (thick gruel with cereal) as well as Urak-Jook were presented among the methods of making Jook, one of staple foods. Milk and ground rice were boiled together into Urak-Jook, which was nutritious because of carbohydrate, added to milk. Hong-sa Myun was mode of ground shrimps, ground bean, ground rice and flour which were kneaded together. It was a nutritiously balanced food. Nineteen kinds of Kimchi presented in this book were classified by the recipes. The five of Jook-soon Ja, U-so Ja, Tam-bok Ja and Jo-gang were made by adding red malt and cereals(boiled rice or candies). Jo-gang, Jo-ga and Jo-gwa-chae were made by adding salt and rice wine. With salt and fermenters added, eight were made. Chim-jup-jeo-ga was made by adding Jang(soy-bean sauce) and the inner chaff of wheat instead of salt. The four of Ka-za-san, Hwang-gwa-san, Tong-gwa-san and Jo-gang were made by adding salt and vinegar. Jo-gang was made by adding salt, rice wine, residue of rice wine and candies. The four of Kae-mal-ga, Ku-cho-chim-chae, Un-gu-hwa and Suk-hwa-chim-chim-chae were made by adding salt and spices. San-got-Kimchi was made without salt. San-got-Kimchi and Suk-hwa-chim-chae were made originally in Korea. Suk-hwa-chim-chae, in particular, was first classified as a kind of Kimchi in this book and oysters were added, which is notable. Pork could be preserved longer when smoked oven the weak fire of thatch ten days and nights. Dog meat was sauced and placed on the bones in a pot. A porcelain was put on the top of the pot. Flour paste sealed the gap between the porcelain and the pot. Some water was poured into the porcelain, and the meat was steamed, with two or three thatched sacks burned, which was a distilled dry steaming. This process has been in use up to now. Various cooking methods of chicken were presented from in Umsik-dimi-bang to in Chosun Musang Sinsik Yori Jebup. These methods were ever present regardless of ages. Such measuring units as Guin(斤) and Nyang(兩) were most frequently used in cooking processes of this book, except in case of Jang(soy bean sauce), vinegar and liquor. Twenty eight kinds of kitchenware and cookers were used, of which porcelains wee most used and pans and sieves followed. The scientific eight cooking methods were as follows. First, salt was refined through saturated solution. Next, it was recommended Hong-sa Myun containing shrimps should not be taken along with pork, which is thought to be a proper diet in terms of cholesterol contained by shrimps and pork. Third, meat was coated with thin gruel and quickly roasted and cleared of the dried gruel membrane, which prevented nutrients from exuding and helped to make the meat well-done. Fourth, The fruit of paper mulberry trees has the protease which can soften meat. Therefore when meat was boiled with th fruit of paper mulberry trees, it can be softened easily. Fifth, pork was smoked over the weak fire of thatch. Sixth, in cooking dog meat, distilled dry steaming raised the boiling point and made it possible to preserve meat longer. Seventh, in boiling the sole of a bear, lime was added, which made meat tender by making the pH lower or higher than that of raw meat. Finally, in boiling down rice gluten, a porcelain in the pot prevented boiling over the brim, which is applied to pots in which to boil medical herbs.

  • PDF

복합재를 이용한 50m급 비행선 구조개발 (Development of 50m Class Airship Structures)

  • 양남선;강왕구;김동민;이진우;염찬홍
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2003년도 추계학술발표대회 논문집
    • /
    • pp.127-131
    • /
    • 2003
  • KARI developed 50m class unmanned airship. The airship employ the pressure envelope design principle. The envelope must be considered as a main structural element of the airship. The envelope & three ballonets are fabricated by polyfiber composite laminates. Other structural components (gondola, tailwing, nosecone & engine mounts) are manufactured by carbon fiber & glass fiber laminates. In order to develop a big unmanned airship, a large amount of structural design, analysis and tests had to be made. The paper describes the structural configuration of the 50m class uumanned airship which are basic starting point of the structural development of an airship. The paper includes the various designing processes, components development tests and analysis results. Envelope & ballonets development processes which are very different to conventional airplane design are given in details with actual analysis & test results. The paper also describes the structural design and analysis results for other composite made structures. Each components were tested by static design limit loads and structural safety were confirmed. The paper shows the manufactured structural components and assembled airship.

  • PDF

Electro-Active-Paper Actuator Made with LiCl/Cellulose Films: Effect of LiCl Content

  • Wang, Nian-Gui;Kim, Jae-Hwan;Chen, Yi;Yun, Sung-Ryul;Lee, Sun-Kon
    • Macromolecular Research
    • /
    • 제14권6호
    • /
    • pp.624-629
    • /
    • 2006
  • The cellulose-based, Electroactive Paper (EAPap) has recently been reported as a smart material with the advantages of lightweight, dry condition, biodegradability, sustainability, large displacement output and low actuation voltage. However, it requires high humidity.. This paper introduces an EAPap made with a cellulose solution and lithium chloride (LiCl), which can be actuated in room humidity condition. The fabrication process, performance test and effect of LiCl content of the EAPap actuator are illustrated. The bending displacement of the EAPap actuators was evaluated with actuation voltage, frequency, humidity and LiCl content changes. At a LiCl/ cellulose content of 3:10, the displacement output was maximized at a room humidity condition. Even though the displacement output was less than that of a high humidity EAPap actuator, the mechanical power output was not reduced due to the increased resonance frequency, which is promising for developing EAPap actuators that are less sensitive to humidity.

펄프 몰드식 육묘포트의 성형조건 및 수분 흡습에 따른 굴곡 하중 특성 분석 (Analysis of Flexural Strength of Seedling Pots Made by a Pulp-Molding Machine under Different Water Contents)

  • 송대빈;정준우;김철환;허무룡
    • 펄프종이기술
    • /
    • 제41권4호
    • /
    • pp.43-51
    • /
    • 2009
  • Paper mill sludges are discharged around 870,000 M/T annually. Only 30% of the paper mill sludge have been recycled and the rest has been disposed by land fill, incineration, ocean abandonment and other ways. Because of overall prohibition of sludge disposal by London Dumping Convention in 2012, a urgent counter measure for paper mill sludge must be provided. In this paper, some basic experiments were carried out to develop a tray cell pot using paper mill sludge for increasing the recycling potential of the wasted sludge. To establish the manufacturing parameters, the tray cell pots were made with three types of materials including virgin pulp, old news paper and corrugated board mixed in a blend tank of a molding machine. The bending force and moisture content of the produced tray cell pots was measured to confirm the application capability. The tray cell pot could be manufactured under the condition of over 20% of virgin pulp, 40% of old news paper added. However, the corrugated board could not be used because of the glutinous substance included. The produced tray cell pot absorbed water very easily and the bending force decreased rapidly. The waterproof material must be used to applicate the produced tray cell pot in plant growing fields.

경주 기림사 소장 지류문화재의 보존실태 및 대책 (The investigation on the actual conditions and the conservation on the countmeasure paper cultural properties stored in Kirimsa temple)

  • 한성희;이규식;정용재
    • 보존과학연구
    • /
    • 통권19호
    • /
    • pp.75-107
    • /
    • 1998
  • The cultural properties of paper made from 11 to 16th century of the Kirimsa temple were found in Birozana Buddhist Statue which was made from 15 to 16th century. These have been stored and exhibited in the exhibition showcase. To examine the environment of conservation and the state of paper, we investigated the temperature and the relative humidity in the inside and outside of the Kirimsa museum and examined the external form and the internal state (water content, acidity and whiteness) of paper. During the investigation period from 27 Aug. to 30 Aug. 1997. The average of temperature and relative humidity were $28.2^{\circ}C$, 67% in the outside and $27.1^{\circ}C$, 73% in the inside, respectively. These indicated the air conditioning was wrong. Among the cultural properties of 79 papers stored in the Kirimsa museum, 37 cases had been repaired but 42 cases not. From the result examining the external form, 20 cases needed to repair. In the internal state of the cultural properties of paper, the water contents were from 11.9% to 16.5%, the average was 15.7%, the acidities from pH 5.7 to pH 6.2 and the whiteness from 37 to 45. From these results, we could see the cultural properties of paper stored in the Kirimsa museum was damaged by the several factors (hydrolysis by fungi, repeated elongation and retraction of cellulose) caused mainly by the high temperature and relative humidity. Therefore, for the conservation of the cultural properties of paper stored in the Kirimsa museum, it need to control the temperature at $18~20^{\circ}C$ and the relative humidity at $55\pm5%$ by the appropriate air conditioning. In order to sterilize fungi occurred to the surface of paper, the cultural properties of paper needed to fumigate. The fungi occurred on the surface of paper were wiped out by using of 70%solution dissolved thymol in ethyl alcohol.

  • PDF

청구보증상 지급청구와 지급- URDG758을 중심으로 - (Demands and Payments under Demand Guarantees - Focused on the URDG 758)

  • 허해관
    • 무역상무연구
    • /
    • 제51권
    • /
    • pp.213-239
    • /
    • 2011
  • This article examines two important issues of the demand for payment by the beneficiary and the payment by the guarantor to the beneficiary under the revised Uniform Rules for Demand Guarantee (URDG) published by ICC, which are called URDG 758 and effected on July 1, 2010. Here, after first briefly defining the concept and nature of the demand for payment, this article discusses various issues surrounding the demand: By whom, where and how the demand has to be made; which documents are required in demanding the payment; how much amount can be demanded and paid; when and where the payment has to be made and which currency has to be used for the payment. The demand for payment has to be made by the beneficiary to the guarantor on or before expiry of the guarantee at the place of issuance of the guarantee unless any other place is specified in the guarantee. The demand has to be made in paper form unless the guarantee requires an electronic form. Unless otherwise expressly stipulated in the guarantee, the demand must be supported by a statement by the beneficiary indicating the applicant is in breach of the underlying contract. Also the demand must identify the guarantee under which it is made, and the time for examination by the guarantor starts on the date of identification. The demand cannot be for more than the amount available under the guarantee. When the demand is complying the guarantor must pay the amount demanded. The payment has to be made at the branch or office of the guarantor that issued the guarantee unless any other place is indicated in the guarantee. The payment has to be made in the currency specified in the guarantee, unless the guarantor is unable to make payment in that currency due to an impediment beyond its control or any illegality under the law of the place for payment. In case of "extend or pay" or "pay or extend" demands, the demand is deemed to be withdrawn if the extension is granted. But if not, the demand has to be paid without any further demand by the beneficiary.

  • PDF

Feasibility Study of a Custom-made Film for End-to-End Quality Assurance Test of Robotic Intensity Modulated Radiation Therapy System

  • Kim, Juhye;Park, Kwangwoo;Yoon, Jeongmin;Lee, Eungman;Cho, Samju;Ahn, Sohyun;Park, Jeongeun;Choi, Wonhoon;Lee, Ho
    • 한국의학물리학회지:의학물리
    • /
    • 제27권4호
    • /
    • pp.189-195
    • /
    • 2016
  • This paper aims to verify the clinical feasibility of a custom-made film created by a laser cutting tool for End-to-End (E2E) quality assurance in robotic intensity modulated radiation therapy system. The custom-made film was fabricated from the Gafchromic EBT3 film with the size of $8^{{\prime}{\prime}}{\times}10^{{\prime}{\prime}}$ using a drawing that is identical to the shape and scale of the original E2E film. The drawing was created by using a computer aided design program with the image file, which is obtained by scanning original E2E film. Beam delivery and evaluations were respectively performed with the original film and the custom-made film using fixed-cone collimator on three tracking modes: 6D skull (6DS), Xsight spine (XS), and Xsight lung (XL). The differences between total targeting errors of the original and custom-made films were recorded as 0.17 mm, 0.3 mm, and 0.17 mm at 6DS, XS, and XL tracking modes, respectively. This indicates that the custom-made film could yield nearly equivalent results to those of the original E2E film, given the uncertainties caused by distortions during film scanning and vibrations associated with film cutting. By confirming the clinical feasibility of a custom-made film for E2E testing, it can be expected that economic efficiency of the testing will increase accordingly.

MADE (Minhash-Assisted Delta Compression Engine) : 델타 압축 기반의 낸드 플래시 저장장치 내구성 향상 기법 (Improving the Lifetime of NAND Flash-based Storages by Min-hash Assisted Delta Compression Engine)

  • 권혁준;김도현;박지성;김지홍
    • 정보과학회 논문지
    • /
    • 제42권9호
    • /
    • pp.1078-1089
    • /
    • 2015
  • 본 연구에서는 쓰기 데이터양 감소를 통해 낸드 플래시 기반 저장장치의 수명향상을 도모할 수 있는 MADE(Min-hash Assisted Delta-compression Engine) 모듈을 제안한다. MADE 모듈은 델타압축기법(delta compression)을 통해 중복되는 데이터 패턴을 최소화하여 실제 낸드 플래시에 인가되는 쓰기 명령 횟수를 획기적으로 줄일 수 있을 뿐만 아니라, 중복제거기법(deduplication) 및 무손실압축기법(lossless compression)의 통합적용과 유사한 효과를 볼 수 있도록 설계되었다. 또한 델타압축기법 과정 중 필요한 참조 페이지 탐색 및 압축 기법을 최적화하여, 저장되는 데이터양을 최대한 줄이는 동시에 부가적인 오버헤드를 최소화 하였다. 시뮬레이션 결과, MADE가 적용된 플래시 변환계층(Flash Transition Layer, FTL)은 실제 낸드 플래시 칩에 저장되는 데이터를 최소 50% 줄일 수 있었으며, 순차적인 중복제거기법과 무손실압축 기법을 단순 통합하여 적용한 경우에 비해 추가적으로 12%의 쓰기 데이터양을 감소시킬 수 있었다.

국제 내진 기준(ISO 3010) 소개 및 평가 (Introduction of ISO 3010 -Bases for Design of Structures-Seismic Actions on Structure)

  • 한상환
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
    • /
    • pp.417-426
    • /
    • 2000
  • This paper introduces the ISO 3010 which is the design standard for seismic action of International Standard Organization. Specially this paper focuses on the philosophical background and the weakness of ISO 3010,. The ISO 3010\ulcorner(Bases for design of structures-Seismic action on structure) were made in 1998 by the efforts of ISO/TC98 which is one working group of ISO. TC98 deals with " Bases for design of structures" in the field of architectural and civil engineering. The revised Committee Draft ISO/CD 3010 was made in February 1999. Even if ISO 3010 has not been complete yet this study carry out critical review of this committee draft.tee draft.

  • PDF