• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.1
• /
• pp.67-73
• /
• 2021

The need for precise location data is growing across numerous markets, and so is the number of affordable high-precision GPS receivers. In this paper, we validated the performance of RTAP2U, a low-cost high-precision RTK receiver that was recently released. Two positioning modes were tested: static and driving. The static test conducted Zero-Baseline Single-RTK and Network-RTK survey for 57 hours and 51 hours, respectively. For the driving test, Network-RTK survey was conducted using VRS services provided by NGII based on Trimble PIVOT and Geo++ GNSMART. The static test showed about 1 cm horizontal and vertical accuracies, which is very stable considering the test duration longer than 50 hours. The integer ambiguity FIX rate marked a solid 100%. The driving test result also reached a 100% FIX rate. Horizontal and vertical accuracies were better than 2 cm and 3 cm, respectively. Researchers can refer to this paper when considering affordable high-precision GPS receivers as an option.

• Toxicological Research
• /
• v.27 no.3
• /
• pp.133-135
• /
• 2011

The FDA guidance focuses on the use of the NOAEL to establish the maximum recommended starting dose. The majority of NOAEL has been described inaccurately or incompletely in final reports for 90-days repeated dose toxicity test based on GLP (good laboratory practice) regulation. This is the most serious one of reasons for why most pharmaceutical companies targeting global markets have disregarded the final report produced from GLP facilities in Korea. The problems in deciding NOAEL reflected in the final reports are mainly due to the followings; 1) Inaccurate description or use of NOEL, NOAEL and LOAEL, 2) Insufficient and inappropriate interpretations in findings from toxicity test. This paper is intended to provide the insight into distinguishing NOAEL from NOEL and LOAEL, and into classifying findings from toxicity test. Here, the three step method is newly suggested by applying the weight-based classification to the NOEL, NOAEL and LOAEL based on the findings.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.5
• /
• pp.582-594
• /
• 2016

Various test data compression techniques have been developed to reduce the test costs of system-on-a-chips. In this paper, a scan chain reordering algorithm for code-based test data compression techniques is proposed. Scan cells within an acceptable relocation distance are ranked to reduce the number of conflicts in all test patterns and rearranged by a positioning algorithm to minimize the routing overhead. The proposed method is demonstrated on ISCAS '89 benchmark circuits with their physical layout by using a 180 nm CMOS process library. Significant improvements are observed in compression ratio and test power consumption with minor routing overhead.

• Journal of the Korean Data and Information Science Society
• /
• v.10 no.1
• /
• pp.67-77
• /
• 1999

For a orientation-shift model supported on the unit sphere, Euler angles are the conventional measure to parametrize orientation-shifts. The essential role which is played by rotationally symmetry of an underlying distribution is reviewed. In this paper we propose the inference procedure based on Euler angles for the rotationally symmetric spherical distribution. The likelihood ratio test(LRT) based on the Euler angles is worked out. The asymptotic distribution of the test under the null hypotheses and certain contiguous alternatives is obtained.

• Communications for Statistical Applications and Methods
• /
• v.19 no.6
• /
• pp.837-847
• /
• 2012

Inverse Gaussian distribution is widely used in applications to analyze and model right-skewed data. To assess the appropriateness of the distribution prior to data analysis, Mudholkar and Tian (2002) proposed an entropy-based test of fit. The test is based on the entropy power fraction(EPF) index suggested by Gokhale (1983). The simulation results report that the power of the entropy-based test is superior compared to other goodness-of-fit tests; however, this observation is based on the small-scale simulation results on the standard exponential, Weibull W(1; 2) and lognormal LN(0:5; 1) distributions. A large-scale simulation should be performed against various alternative distributions to evaluate the power of the entropy-based test; however, the use of a theoretical method is more effective to investigate the powers. In this paper, utilizing the information discrimination(ID) index defined by Ehsan et al. (1995) as a mathematical tool, we scrutinize the power of the entropy-based test. The selected alternative distributions are the gamma, Weibull and lognormal distributions, which are widely used in data analysis as an alternative to inverse Gaussian distribution. The study results are provided and an illustrative example is analyzed.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.1
• /
• pp.28-37
• /
• 1999

In this paper. we developed a delay test architecture and test procedure for clocked 5-bit asynchronous counter circuit based on boundary scan architecture. To develope, we analyze the problems of conventional method on delay test for clocked sequential circuit in boundary scan architecture. This paper discusses several problems of delay test on boundary scan architecture for clocked sequential circuit. Conventional test method has some problems of improper capture timing, of same pattern insertion, of increase of test time. We suggest a delay test architecture and test procedure, is based on a clock count-generation technique to generate continuous clocks for clocked input of CUT. The simulation results or 5-bit counter shows the accurate operation and effectiveness of the proposed delay test architecture and procedure.

• Journal of Korean Dental Science
• /
• v.12 no.2
• /
• pp.58-65
• /
• 2019

Purpose: This study was aimed to investigate the possibility of utilizing smart device-based test (SBT) for competency evaluation in dental education and to analyze the student responses on overall competency evaluation using SBT method, in comparison to ubiquitous-based test (UBT). Materials and Methods: Questionnaire surveys have been conducted at Yonsei University College of Dentistry from 2015 to 2018 to obtain students' feedback on the application of SBT to competency evaluation. In addition, in order to supplement the competency evaluation procedure, considerations were explored by comparing the expected and actual difficulty of each item when preparing items for competency evaluation with SBT. Result: According to the survey results, student responses between the initial two years (2015 and 2016) differed from those in next two years (2017 and 2018). Students in 2017 and 2018 had more positive responses on competency evaluation with SBT. To determine the test validity, criterion-referenced evaluation was adopted to compare the data in 2017 and 2018 and slight differences in test difficulty in 2018 between the expected and actual difficulty of items were found. Conclusion: The results indicated that SBT was more appropriate for competency evaluation than UBT, based on four-year period of competency evaluation. The SBT was not affected by either the file size or the number of test-takers. Interestingly, students were not sensitive to test version of competency evaluation (paper-based test and SBT). This study suggests that the quality of the test items should be measured by continuous monitoring of the expected and actual difficulty of items for determining test validity. More detailed results and discussions of the findings are given for the development of test procedure and further potential research directions in dental education.

• Journal of the Korean Data and Information Science Society
• /
• v.14 no.4
• /
• pp.951-963
• /
• 2003

In this paper, we propose goodness of fit test statistics based on the estimated Kullback-Leibler information functions using the data from three step stress accelerated life test. This acceleration model is assumed to be a tampered random variable model. The power of the proposed test under various alternatives is compared with Kolmogorov-Smirnov statistic, Cramer-von Mises statistic and Anderson-Darling statistic.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.127-129
• /
• 1997

In this paper, an active magnetic bearing-based motor-generator(M-G) system is designed and controlled by using DSP devices. Several experiments including start-up test, impulse test, whirl test, and generator load test are conducted using digital PID algorithm and AC power of about 58Hz, 100V, 0.8A can be generated from the M-G set.

• Communications for Statistical Applications and Methods
• /
• v.6 no.3
• /
• pp.967-976
• /
• 1999

In this paper we study the Hellinger distance based goodness-of-fit tests that are analogs of likelihood ratio tests. The minimum Hellinger distance estimator (MHDE) in normal models provides an excellent robust alternative to the usual maximum likelihood estimator. Our simulation results show that the Hellinger deviance test (Simpson 1989) based goodness-of-fit test is robust when data contain outliers. The proposed hellinger deviance test(Simpson 1989) is a more direcct method for obtaining robust inferences than an automated outlier screen method used before the likelihood ratio test data analysis.