• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.12
• /
• pp.1933-1946
• /
• 2010

This paper is a comparative analysis of the $19^{th}$ century practice of indigo dyes and dyeing in Korea and England. From over hundreds species of indigo plants in the world, it was dyer's knotweed and woad that were cultivated in Korea; however, the only indigo plant grown in England was woad. Indigo dye was produced in the form of damp indigo sediment (jeon) in Korea; however, imported indigo (as a main dye) and couched woad (as an additional dye) were indigo dyes used in England. There existed three kinds of indigo vats, the ice vat, ash-water vat, and indigo sediment (jeon) vat, in Korea. The fresh leaves of indigo were used for both the ice vat and ash-water vat. The ice vat was very convenient for preparation, but had a weakness in the inability to produce a very deep shade of blue. The ash-water vat and indigo sediment (jeon) vat were in use for producing a very deep shade of blue. The indigo sediment Goon) vat was employed presumably only by professional dyers. The indigo vat practiced in England was categorized into two types; one was woad-indigo vat, and the other was an indigo powder vat prepared by using imported indigo rock. There was a tendency to adopt different kinds of indigo vats according to the material to be dyed. The woad-indigo vat was employed for the dyeing of wool. A few of chemical vats with imported indigo were adopted, especially for the dyeing of cotton. Indigo dyers in 19th century Korea were differentiated from the rest of the dyers. They managed the growing of indigo plants as well as the production of indigo sediment (jeon). Woad dyers in 19th century England handled woolen cloth as well as worsted and woolen yarn in general. However, they sometimes dyed silk skein as well. They produced several colors such as black, blue, slates, grays, by using both woad and imported indigo.

• Composites Research
• /
• v.27 no.6
• /
• pp.242-247
• /
• 2014

The fabrication of flexible electrodes coated on the surface of a dielectric elastomer film, which is a type of electroactive polymer (EAP), was carried out. Controlled amounts of Xylitol powder were added (10, 30, 50 and 70 wt%) to the commercial conductive polymer (PEDOT:PSS) to enhance resilience of the electrode. To check resilience of the fabricated composite electrodes, tensile tests were carried out using silicone films coated with the polymer electrodes. From the test results, it was found that 70 wt% Xylitol containing conductive polymer had excellent elongation and high failure strains. Furthermore, surface of the silicone film was uniformly polished with various abrading papers to enhance the wettability of the conductive polymers on the surface of the silicone film. It was found that the silicone film polished with #120 abrading paper had the best wettability and guaranteed excellent bonding behavior.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.843-848
• /
• 2013

As the LNG demands are growing, the constructions of LNG FPSO (Floating Production Storage and Off-loading) and LNG carriers have been constantly increased, and the various design of storage tank has been tried. This paper propose that the material of inner storage tanks is made of 5~9% Ni steel plate and perlite powder insulation instead of urethane foam block. It needs essentially to obtain the proper design specifications that are the pressure of perlite, the characteristics of resilient blanket as the pressure absorber, optimum thickness of blanket and design pressure of tank wall, etc. to enable the perlite insulation system to LNG carrier, The results show that the design thickness of blanket should be between 1/4 to 1/3 of insulation width and the optimum rate becomes 30%, and the design pressure be applied below 1,500 Pa with blanket thickness.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4673-4678
• /
• 2011

In this paper, studies on a mixing characteristic and viscosity measurement of polymer/graphite composites for a bipolar plate of the polymer electrolyte membrane fuel cell were presented. Since the materials for the bipolar plate should be electrically conductive, contents of solid graphite in the composite are very high. As a consequence, a viscosity of the polymer/graphite composite used for the bipolar plate is very high and the measurement of the viscosity is difficult. Viscosity measurements of the polymer/graphite composites were not possible because pressure drops were continuously fluctuated during the viscosity measurements when a conventional capillary die was used. After the die design was optimized, the steady state pressure drop could be achieved, but the viscosity thus measured was not reproducible. After many trials with different experimental techniques, it was found that melt blending of the grinded powder mixtures of both PET and graphite provides reproducible viscosity measurements and electric conductivities of the polymer/graphite composites.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.3
• /
• pp.413-417
• /
• 2003

To evaluate the antimicrobial activity of green tea against putrefactive microorganism in steamed bread, antibacterial activity of green tea extract against well-known strains of spoilage bacteria (Bacillus subtilis ATCC 6633, Bacillus pulmilus KCTC 3348 and Bacillus cereus IFO 12113) and mold (Aspergillus niger KCCM l1239) in bread was determined using the paper disk method. The green tea extract (GTE) showed the inhibition effects on the growth of all the strains of bacteria and mold at 1, 2, 3% levels. The activity of GTE was stable in the wide range of pH (4~9) and temperature (50~20$0^{\circ}C$). When green tea powder (GTP: 1, 3, 5%) was added to steamed bread increase of total bacterial and mold counts declined during storage at 25"C as the levels of GTP increased. By addition of 5% GTP, mold appeared 1 day late extending shelf life of steamed bread compared to control bread without GTP. Therefore, the levels of GTP added to steamed bread could be more than 5% for extended shelf life and wholesomeness of steamed bread.read.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.12
• /
• pp.1887-1897
• /
• 2001

Korea Atomic Energy Research Institute (KAERI) launched an intermediate scale steam explosion experiment named "Test for Real Corium Interaction with water (TROI)" using reactor material to investigate whether the molten reactor material would lead to energetic steam explosion when interacted wish cold water at low pressure. The melt-water interaction experiment is performed in a pressure vessel with the multi-dimensional fuel and water pool geometry. The novel concept of cold crucible technology, where powder of the reactor material in a water-cooled cafe is heated by high frequency induction, is firstly implemented for the generation of molten fuel. In this paper, the lest facility and cold crucible technology are introduced and the results or the first series of tests were discussed. The 5 kg of molten ZrO$_2$jet was poured into the 67cm deep water pool at 30 ∼ 95 $\^{C}$. Either spontaneous steam explosions or quenching was observed. The morphology of debris and pressure wave profiles clearly indicate the differences between the two cases.

• Korean Journal of Food Science and Technology
• /
• v.2 no.2
• /
• pp.38-42
• /
• 1970

The crude enzyme, tamylase, was produced by cultivating the Bacillus subtilis on wheat bran. It is composed of amylase and protease, and can be used as an additive material to the synthetic detergent, Suny which is manufactured by Ae-kyung Oil and Fat Co. Amylase activity of the enzyme as an additive material to the synthetic detergent; 1. is decreased by increasing the amount of detergent. But inhibitory rate under the practical used concentration of detergent is less than ten percents. 2. have optimal temperature at $ 40^{\circ}C$. 3. have optimal pH of substrate on pH $5{\sim}6.5$. 4. is inhibited by $Fe^{+++}$. When enzyme and detergent are mixed both as powder, the enzyme is good for storage. Proteolytic activity is good at the practical used concentration of the detergent, but it is inhibited by strong concentration.

• Tribology and Lubricants
• /
• v.31 no.4
• /
• pp.183-188
• /
• 2015

This paper presents the experimental effects of lubricant with nanodiamond particles in sliding friction. In order to improve the performance of lubricants many additives are used, such as MoS₂, cadmium chloride, indium, sulfides, and phosphides. These additives are harmful to human health and to the environment, so alternatives are necessary. One such alternative is nanodiamond powder, which has a large surface area. In order to investigate the effect of nanodiamonds in lubricants under sliding friction, they are dispersed in the lubricant at a variety of concentrations (0 wt%, 0.1 wt%, 0.3 wt%, 0.5 wt%, and 1 wt%) using the matrix synthesis method. Friction and wear tests are performed according to the ASTM G99 method using a pin-on-disc tester at room temperature. The specimens used in this experiment are AISI 52100 ball bearings and AISI 1020 steel discs. During the test, lubricant mixed with nanodiamond is supplied constantly to keep the two bodies separated by a lubricant film. To maintain boundary lubrication, the speed is set to 0.18 m/s and a load of 294 N is applied to the disc through the pin. Results are recorded by using workbench software over the test duration of 10 minutes. Experimental results show that when the concentration of nanodiamond increases, the coefficient of friction decreases. However, above a nanodiamond concentration of 0.5 wt%, both the coefficient of friction and wear volume increase. From this experiment, the optimum concentration of nanodiamond showing a minimum coefficient of friction of 0.09 and minimum wear volume of 0.82 nm² was 0.5 wt%.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.6
• /
• pp.1694-1700
• /
• 2005

Paraquat is a nonselective contact herbicide that may induced damage to many organs poisoned with it. But there is no effective treatment modality. This report is about one case of treatment for paraquat poisoning. The patient was hospitalized of Wonkwang university Gwangju Oriental Medical Hospital at the department of Internal Medicine. For 26 days of hospitalization period, the authors supplied gamdutanggami(甘豆湯加味), which consists of Radix glycyrrhizae(甘草), Semen Glycine(黑豆), burned powder of Rhizoma rhei(大黃沙炭末), Succus phyllostachyos(竹瀝) and chinese ink(墨汁), decoction of Galla chinensis(五倍子) and Radix glycyrrhizae(甘草), and fluid. And then he showed improvement of condition and returned to a daily life. This report has a limitation for proof of oriental medicine remedial value. Because this is the only one case of a small quantity of paraquat poisoning patient less than 20cc. Actually there are a few paper regarding the Oriental medicine remedial value in paraquat poisoning patient, so we hope luther study and report ensue.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.1
• /
• pp.26-31
• /
• 2007

Hydrogen has a high potential to be a renewable substitute for fossil fuels, because of its high gravimetric energy density and environment friendliness. In particular, Magnesium have attracted much interest since their hydrogen capacity exceeds that of known metal hydrides. One of the approaches to improve the kinetic is addition of metal oxide. In this paper, the effect of $Fe_2O_3$ concentration on the kinetics of Mg hydrogen absorption reaction was investigated. $MgH_x-Fe_2O_3$ composites have been synthesized by hydrogen induced mechanical alloying. The powder synthesized was characterized by XRD, SEM and simultaneous TG, DSC analysis. The hydrogenation behaviors were evaluated by using a sievert's type automatic PCT apparatus. Absorption and desorption kinetics of Mg catalyzed with 5,10 mass% $Fe_2O_3$ are determined at 423, 473, 523, 573, 623K.