• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.1
• /
• pp.25-31
• /
• 2020

Recently, applications of biomass-based plastics have increased according to the eco-friendly policy of the reduction of carbon dioxide emissions in domestic and foreign government. In this study, a paper plastic composite was produced by compounding polypropylene and micronized paper powder that was prepared using dry pulverization technology. Subsequently, the specimen of paper plastic was verified with mechanical properties, formability and product safety test to confirm the suitable packaging materials for food packaging. Paper plastics showed slightly lower mechanical properties than currently commercialized PP composites. However, paper plastics are valuable materials as environmentally friendly carbon-reducing material because of high biocarbon content, light weight features and applicability of existing manufacturing machines or system.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.3
• /
• pp.92-97
• /
• 2022

Plastics are classified into 7 types such as PET (PETE), HDPE, PVC, LDPE, PP, PS, and Other for separation and recycling. Recently, large corporations advocating ESG management are replacing them with bioplastics. Incineration and landfill of disposal of plastic waste are responsible for air pollution and destruction of the ecosystem. Because it is not easy to accurately classify plastic materials with the naked eye, automated system-based screening studies using various sensor technologies and AI-based software technologies have been conducted. In this paper, NIR scanning devices considering the NIR wavelength characteristics that appear differently for each plastic material and a system that can identify the type of plastic by learning the NIR spectrum data collected through it. The accuracy of plastic material identification was evaluated through a decision tree-based SVM model for multiclass classification on NIR spectral datasets for 8 types of plastic samples including biodegradable plastic.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.25-27
• /
• 2005

This paper deals with the comparison and analysis of brushless DC (BLDC) motor with radial and polar anisotropic plastic magnet. The open-circuit field distributions and back-emf for BLDC motor with polar plastic magnet are established analytically and the results are validated extensively by comparison with finite element (FE) analyses. On the basis of two dimensional (2-D) analytical solutions, this paper predicts open-circuit field characteristics according to design parameters and makes a comparison between BLDC motor with polar plastic magnet and it with radial plastic magnet in terms of required magnet volume and harmonic of air-gap flux density waveform.

• Archives of Plastic Surgery
• /
• v.45 no.4
• /
• pp.298-303
• /
• 2018

Flap thinning is a procedure for making a thick flap thinner. This procedure does more than simply fill in the defected area, and it is better for reconstructing the area both functionally and aesthetically. However, because flap thinning is a rather blind procedure, it may have harmful effects on flap vascularity. Therefore, the vasculature of a flap must be understood before performing flap thinning. This paper analyzes the basic anatomy underlying flap thinning based on the previous anatomic study that categorized flaps into 6 types by their vascular structures. This paper also reviews specific studies of frequently practiced flap procedures (deep inferior epigastric artery perforator flap, thoracodorsal artery perforator flap, and anterolateral thigh flap) and presents important precautions for flap thinning procedures. Finally, this paper briefly examines the axiality of the subdermal plexus, which needs to be taken into account when performing flap thinning.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1836-1841
• /
• 2007

Based on three-dimensional (3-D) FE limit analyses, this paper provides plastic limit and TES(Twice-Elastic-Slope) loads for pipe bends under combined pressure and out-of-plane bending. The plastic limit loads are determined from FE limit analyses based on elastic-perfectly-plastic materials using the small geometry change option, and the FE limit analyses using the large geometry change option provide TES plastic loads. A wide range of parameters related to the bend geometry is considered. Based on the FE results, closed-form approximations of plastic limit and TES plastic load solutions for pipe bends under out-of-plane bending are proposed.

• Structural Engineering and Mechanics
• /
• v.2 no.2
• /
• pp.141-156
• /
• 1994

In this paper, the effect of material elasticity was evaluated through a simple model as proposed by Wang and Yu (1991), for yield mechanisms of a cantilever beam under tip pulse loading. The beam was assumed rigid-perfectly plastic but instead of the usual fully clamped constraints at its root, an elastic-perfectly plastic rotational spring was introduced there so the system had a certain capacity to absorb elastic energy. Compared with a rigid-perfectly plastic beam without a spring root, the present beam-spring model showed differences in the initial plastic hinge position and the minimum magnitude of the dynamic force needed to produce a plastic failure. It was also shown that various failure responses may happen while the hinge travels along the beam segment towards the root, rather than a unique response mode as in a rigid perfectly plastic analysis.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.7-12
• /
• 2003

In scrapped material field, about ten millions ton of waste plastic materials are produced in korea. However recycling rate of waste plastic materials have above 25%. Therefore, it is urgently needed that they are used as recycled materials in order to prevent environment pollution and grain economic profits. In this paper, physical and mechanical properties of light weight concrete using waste plastic materials for aggregates are described in order to develop a light weight concrete with the aggregate made from waste plastic goods, it was carried out many experiments on mix proportion and strength. According to the experimental results, high-strength mortar was necessary to make light weight concrete using aggregate of waste plastic materials. Especially, considering the side of recycling of plastic wastes, it is recommended that recycled aggregates made from waste plastic materials is applied to light weight concrete.

• Journal of Integrative Natural Science
• /
• v.13 no.4
• /
• pp.158-169
• /
• 2020

Modern people live in the age of plastics. It has been widely used due to its easy molding processing, mass production, and excellent durability. However, over-produced plastics for convenience cause plastic disasters and adversely affect the ecosystem. Since the COVID-19 outbreak, the use of single-use plastic waste due to the use of delivery services has increased. The COVID-19 pandemic has caused a plastic pandemic. Currently, domestic recycling policies depend only on recycling collection companies and market prices of recyclable resources. This paper confirms whether the outbreak of COVID-19 has affected the price of plastic waste. It also shows that the price of plastic waste is more unstable than metals with a high recycling rate. This urges businesses to share the cost of recycling on plastic waste, no longer being dependent on market prices for recyclable resources.

• Journal of Ecology and Environment
• /
• v.48 no.1
• /
• pp.74-84
• /
• 2024

Background: Despite many environmental problems, plastic waste emissions have been a significant surge during last few decades in the Republic of Korea. Furthermore, the emergence of the coronavirus disease 2019 (COVID-19) pandemic has lead to an increased use and disposal of plastic waste worldwide. This paper tried to present summarized data related to the production and disposal of plastics especially before and after the COVID-19 pandemic with environmental impacts of plastics. Also, review of plastic waste reduction policies and feasible policies to promote an act for a safe, sustainable environment are presented. Results: Plastics cause many environmental problems due to their non-degrading properties and have a huge direct and indirect impact on Ecosystems and Public Health. Microplastics need a lot of attention because their environmental effects are not yet fully identified. Despite plastic's significant impact on climate change, the impact is not yet widely known to the public. Since the COVID-19 pandemic, the use of plastic has surged and recycling has decreased due to the increase in delivery food and online shopping. Korea is introducing very active plastic and waste management policies, but it is necessary to implement more active policies by referring to the cases of other countries. Conclusions: In this article, we have scrutinized the evolution of plastic waste generation in the aftermath of the COVID-19 pandemic and delved into policy frameworks adopted by other nations, which South Korea can draw valuable lessons from. The formidable challenges posed by plastic waste, the remarkable shifts witnessed during the COVID-19 era, and the multifaceted response strategies elucidated in this paper all play a pivotal role in steering South Korea toward a sustainable future.

• Journal of Information Technology Applications and Management
• /
• v.20 no.3_spc
• /
• pp.187-199
• /
• 2013

South Korea became the country where there is the most plastic surgery per person in the world. Plastic surgery already has been the core part in the beauty industry. Therefore, in order to understand the beauty industry, we studied the characteristics of the plastic surgery's websites. From 2006 to 2011, we researched total number of 407 plastic surgery websites including, 166 the most visited plastic surgery websites, 241 comparing of bench mark websites. The collected data was analyzed by using the method of Multiple Discriminant Analysis(MDA). As a result of the research, firstly, the most visited plastic surgery websites were not a contents provider but a community website, secondly, well organized and actively adaptable of the rapid changes from environment. In addition, there were also competitiveness to become the most visited plastic surgery website and by the possibilities, the relatively large size of plastic surgery had high probability to own the most visited website. This research paper is looking forward to be used as the understanding the e-business of the plastic surgery.