• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.21-29
• /
• 2014

Due to enormous number of user and limited memory space, the memory saving is become an important issue for big data service these days. In the large scaled multiple-input multiple-output (MIMO) system, the Teoplitz channel can play the significance rule to improve the performance as well as power efficiency. In this paper, we propose a Toeplitz channel decomposition based on matrix vectorization. Here we use Toeplitz matrix to the channel for large scaled MIMO system. And we show that the Toeplitz Jacket matrices are decomposed to Cooley-Tukey sparse matrices like fast Fourier transform (FFT).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1825-1830
• /
• 2015

In some cases, despite the pedestrian jaywalking pedestrian traffic lights to red, or even wait for the walk signal to stand down in the driveway. If this is the case may be liable to lead to a traffic accident. Thus, using an infrared sensor wateuna adopted the approach that the warning announcement when a pedestrian enters the driveway, curved pedestrian crossing the intersection in this case, it is difficult to install. In this paper, we propose a Fitness referral system utilizes a built-in sensor of the Android mobile devices. For this purpose, the sensor is a proximity sensor using an acceleration sensor. The proximity sensor has a number of disadvantages compared to the high precision battery power, the acceleration sensor accuracy, fast response time, on the other hand, the disadvantage is the lower. Close to reduce battery consumption of the sensor, BMI of the user sensor control mechanism and increase the accuracy of the acceleration sensor (Body Mass Index) obtained after the index was applied to the recommendation algorithm, which like the movement mechanism.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1935-1941
• /
• 2013

We can use NAT(Network Address Translation) technology to solve the lack of IP address. The problem of NAT traversal is happened when the filtering characteristics of NAT remove the packet that has no binding in the address translation table of NAT. There were many kinds of way to solve these problems by using additional device. Lately, network market is changed into integrating wired and wireless network by the IMS(IP Multimedia Subsystem). The IMS integrates to control network of wired and wireless network, has emerged to control convergence network effectively. Lately, the additional devices like IBCF(Interconnection Border Control Function) and IBGF(Interconnection Border Gateway Function) are used to solve the NAT traversal problem in the IMS. In this paper, we propose the solution of NAT traversal using P-CSCF without any additional equipment in the IMS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.8
• /
• pp.1083-1089
• /
• 2018

Surgery to increase cerebral blood flow is one of the treatment methods of cerebral infarction. In order to supplement this invasive method, non-invasive devices have been introduced that use human blood pressure to pressurize the extremities to increase cerebral blood flow. However, the problem of poor speed and accuracy was raised. In this paper, the perfusion index of each arm is measured by applying pressure to both arms using Blood Oxygen Level Sensor to improve the accuracy of measurement and measurement time. The pressure applied to the arm is calculated by using the pressure value obtained from the arm. Like the existing blood pressure measuring cerebral blood flow increasing device, the blood flow can be increased by more than 20% and the measurement time can be shortened, so that it can be selectively used for the patient with cerebral infarction.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.3
• /
• pp.301-306
• /
• 2010

In this paper, a SIT(Source Independent Tree) method for ray tracing is proposed to enhance the efficiency of tree construction with reuse of sub tree in urban environment, As the SIT method is applied, the decrease of the number of nodes for picocell and microcell simulations is 100 times. And 88~98 % of the total nodes are reused with change of location of signal source from an analysis of node reuse efficiency. Therefore the proposed SIT method is useful in performance enhancement of ray tracing, especially, for multiple antenna simulation like as MIMO system and cell planning.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.5
• /
• pp.321-327
• /
• 2022

In this paper, a wrinkled structure was formed on the PDMS surface through UV/Ozone treatment, and the wrinkle structure formation mechanism was revealed through physicochemical characterization. A wrinkle structure was formed on the PDMS surface through UV/Ozone treatment for 30 min, and periodic wrinkle formation on the PDMS surface was confirmed by cross-sectional imaging of the scanning electron microscope. In addition, through x-ray photoelectron spectroscopy spectral analysis, it was confirmed that the silica-like-surface of SiOx on the PDMS surface was formed by UV/Ozone. The results of this study not only improve the understanding of the mechanism of wrinkle structure formation on the PDMS surface by UV/Ozone treatment, but also can be used as a basic study to adjust the amplitude and period of the wrinkle structure according to UV/Ozone irradiation conditions in the future.contact angles and the surface energies of FSAMs, it was confirmed that pretilt angles of LC molecules increased according to the alkyl chain length. High optical transparency and uniform homeotropic LC alignment characteristics of FSAMs showed the possibility of FSAMs as an LC alignment layers.

• Journal of the Korean Society of Tobacco Science
• /
• v.27 no.1 s.53
• /
• pp.83-93
• /
• 2005

This study was conducted to evaluate the effect of additives in low sidestream cigarette papers, such as Mg$(OH)__2,\;TiO_2\;and\;KH_{2}PO_4$ on the delivery of mainstream and sidestream smoke. From the analysis of tar and nicotine in sidestream and mainstream smoke, the delivered ratios of tar and nicotine by sidestream to mainstream smoke in common cigarette paper were 5.32 and 8.60, respectively. However, the delivered ratios of those of the paper containing $Mg(OH)_2\;were\;2.25\~3.23,\;4.86\~7.14,\;Mg(OH)_2\;and\;KH_{2}PO_4\;were\;2.12\~2.92,\;4.67\~6.89,\;TiO_2\;was\;3.21,\;7.51 $ respectively. The deliver patterns of semi-volatile components in the cigarettes were similar each there, but a slight different pattern in the amount was observed depending on the kinds of compounds added in cigarette papers. In the cigarettes made of $Mg(OH)_2$ added paper, the aromatic components such as benzene, toluene and phenol were generated more while the aliphatic components like neophytadiene, ethyl decanoate were delivered less than the cigarettes made of common cigarette papers. However, the cigarettes manufactured with $Mg(OH)_2\;and\;KH_2PO_4$ added paper showed an opposite trend. The cigarettes made of $TiO_2$ added paper showed relatively low delivery in the most compounds measured. In sensory evaluation, cigarette papers tested were noticed a distinguishable sensory character between the low sidestream smokes with additive cigarette papers except $TiO_2$ added one. Moreover, aroma patterns detected by a electronic nose system in TPM were a similar tendency.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.239-247
• /
• 2014

The CTSIB (Clinical Test of Sensory Integration on Balance) using high sensitive pressure sensors is normally used to assess the sense of balance in hospital. It takes an objective measurement of the amount of sway that occurs in the body trunk by observing the change in the center of pressure (CoP) on the foot at the upright posture. In this paper, we would like to propose method to easily measure trunk sway in home. Although the Wii balance board(WBB) is used for games, it can measures the center of pressure, which is highly correlated. The Wii remote controller(WRC) is inexpensive compared to the WBB, but it has problems with estimation of trunk sway because it can't measure pressure directly like WBB. We collected data from 10 normal subjects (5 males, 5 females) from two devices in order to compare the CoP from WBB and the center of mass (CoM) from WRC. The results of WRC and WBB was similar when the data were analyzed by the convex hull and ellipse area.

• Journal of KIISE:Databases
• /
• v.28 no.3
• /
• pp.357-372
• /
• 2001

In this paper, we present the concept of generalization in constructing windows for subsequence matching and propose a new subsequence matching method. GeneralMatch, based on the generalization. The earlier work of Faloutsos et al.(FRM in short) causes a lot of false alarms due to lack of the point-filtering effect. DualMatch, which has been proposed by the authors, improves performance significantly over FRM by exploiting the point filtering effect, but it has the problem of having a smaller maximum window size (half that FRM) given the minimum query length. GeneralMatch, an improvement of DualMatch, offers advantages of both methods: it can use large windows like FRM and, at the same time, can exploit the point-filtering effect like DualMatch. GeneralMatch divides data sequences into J-sliding windows (generalized sliding windows) and the query sequence into J-disjoint windows (generalized disjoint windows). We formally prove that our GeneralMatch is correct, i.e., it incurs no false dismissal. We also prove that, given the minimum query length, there is a maximum bound of the window size to guarantee correctness of GeneralMatch. We then propose a method of determining the value of J that minimizes the number of page accesses, Experimental results for real stock data show that, for low selectivities ($10^{-6}~10^{-4}$), GeneralMatch improves performance by 114% over DualMatch and by 998% iver FRM on the average; for high selectivities ($10^{-6}~10^{-4}$), by 46% over DualMatch and by 65% over FRM on the average.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.1
• /
• pp.16-23
• /
• 2019

Fine particulate matter known as PM 2.5 refers to the atmospheric particulate matter that has a diameter less than 2.5 micrometer identified as dangerous element for human health and its concentration can provide us a clear picture about air dust concentration. Humans stay indoor almost 90% of their life time and also there is no official indoor dust concentration data, so our study is focused on measuring the indoor air quality. Indoor dust data monitoring is very important in hospital environments beside that other places can also be considered for monitoring like classrooms, cements factories, computer server rooms, petrochemical storage etc. In this paper, visible light communication system is proposed by Manchester encoding technique for electromagnetic interference (EMI)-free indoor dust monitoring. Important indoor environment information like dust concentration is transferred by visible light channel in wide range. An average voltage-tracking technique is utilized for robust light detection to eliminate ambient light and low-frequency noise. The incoming light is recognized by a photo diode and are simultaneously processed by a receiver micro-controller. We can monitor indoor air quality in real-time and can take necessary action according to the result.