• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.406-409
• /
• 2007

This paper proposes an algorithm that predicts current electrostatic charge in a factory. The algorithm based on LSM(Least Square Method) dynamically takes the number of sample while calculating the value of electrostatic charge. The simulation results show that the proposed algorithm gains 73.18161 standard deviation with 95% trust probability and is better than conventional algorithm. We design the electrostatic prediction embedded system based on pxa255 with the proposes algorithm.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.765-767
• /
• 2001

Linear pulse Motors(LPM) are widely used in fields where smooth linear motion is required, and their position accuracy is higher than other motors. Hybrid linear pulse motors(HLPM) are regarded as an excellent solution to positioning problems that require high accuracy, rapid acceleration and high-speed. The LPM has low mechanical complexity, high reliability, precise open-loop operation and low inertia etc. in many application areas such as factory automation speed positioning, computer peripherals and numerically controlled machine tools. This motor drive system is especially suitable for machine tools the high position accuracy and repeatability. This paper describes about that need of the embroider machine, we want to design position-scanning device for the embroidery machine. At first, to be analysed characteristics of the machine and next designed the LPM. we used the field analysis program, The finite element method(FEM) program tool is employed for calculation the force. The reluctance models will be used the magnetic permeance of air gap by static- conditions. The forces between forcer and platen have been calculated using the virtual work method.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.10
• /
• pp.2737-2749
• /
• 1998

Recently, vision system is widely used in factory automation processes. In this paper, the method which detects the badness in the position, slop, and the lead of chips is proposed for the inspection of semiconductor chips. The conventional methods mainly inspect semiconductor IC with the features which is extracted in image. But we propose the method which segments the lead part by the morphology and inspects the lead faults by the invariant moment. In the simulation. the results of the proposed method is better than those of the conventional method for the noisy and noiseless images .

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.43-48
• /
• 2008

The object of this paper is to evaluate on constructability of modular steel frame with the hollow structural steel section to LEB C-shape. A modular building is built with factory-manufacture and site-construction. The advantage of a Modular building presents that enhanced building quality, shortened construction period and easy at an expansion and enlargement for buildings but also has demerits such as size restriction of the modular units according to the Road Traffic Law and Inflexibility of the unit composition. So in this study we use light-weighted structure members with bolted joint for easy Knock-down and traffic, also we evaluated the constructability of this bolted joints type modular buildings.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.4
• /
• pp.65-71
• /
• 2008

The object of this paper is to evaluate on constructability of modular steel frame with the hollow structural steel section to LEB C-shape. A modular building is built with factory-manufacture and site-construction. The advantage of a Modular building presents that enhanced building quality, shortened construction period and easy at an expansion and enlargement for buildings but also has demerits such as size restriction of the modular units according to the Road Traffic Law and Inflexibility of the unit composition. So in this study we use light-weighted structure members with bolted joint for easy Knock-down and traffic, also we evaluated the constructability of this bolted joints type modular buildings.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.44-44
• /
• 2010

Conventional water treatment facilities like precipitation process need large-scale equipment and wide space to purify the wastewater of paper factory. In case of massive waste water, high gradient magnetic separation (HGMS) parts are more effective to purify it rapidly and to occupy relatively small space, since large voids at filter with HGMS are adopted. Cryo-cooled Nb-Ti superconducting magnet with room temperature bore in diameter of 100 mm and 600 mm in height was used for magnetic separator. Magnetic filters were designed by the analysis of magnetic field distribution at superconducting magnets.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.7
• /
• pp.782-787
• /
• 2014

Due to the complicated steel structure and safety concern, it is very difficult to deploy wireless networks in power plants. This paper presents a hybrid network, named as $P^2HYMN$ (Power Plant HYbrid Maintenance Network), encompassing PLC (Power Line Communication), TLC (Telephone Line Communication), and Wireless LAN. The design goal of $P^2HYMN$ is to integrate multimedia data such as design drawings of control equipment, process data, and video image data for maintenance operation in electric power plants. A Multiplex Line Communication (MLC) device was designed and implemented to integrate PLC, TLC, and Wireless LAN into $P^2HYMN$. Performance test of $P^2HYMN$ has been conducted on a testbed under various conditions. The throughput of TLC was shown as 39 Mbps. Because the bandwidth requirement per camera is 8.5 Mbps on average, TLC is expected to support more thant four video camera at the same time.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.1
• /
• pp.20-28
• /
• 1989

The recognition of partially occluded objects is of prime importance for industrial machine vision applications and to solve real provlems in factory automation. This paper describes a method tc solve the problem of occlusion in a two dimensional scene. The technique consists of three steps: searching of border, extracting of line segments and clustering of hypotheses by matching probability. Computer simulation results have been tested for 20 scenes contained the 80 models, and have obtained 95% of properly correct recognition rate on the average.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.800-807
• /
• 2003

Decomposition of tasks in the ordinary manufacturing systems is usually based on the predefined goal of the system. To achieve the high-level-goals (e.g., factory goal or company goal), several sub-goals should be achieved in advance. However, goals can change along with the current status of the system and the external environmental situations. Thus, a manufacturing system should support the goal-formations which can be bearable these changes for efficient and effective operations. Therefore, it IS necessary to develop a systematic methodology for the goal-formations in a manufacturing system. Especially, the formation and/or change of goals in real-time should be possible for distributed and dynamic systems including the fractal manufacturing system (FrMS). In this paper, a threefold methodology is proposed for the goal-formation process (GFP) in the FrMS; 1) a goal­generating process (GGP) to make and propagate fuzzy goals, 2) a goal-harmonizing process (GHP) to eliminate or reduce conflicts and interferences of goals by using a mobile agent- based negotiation scheme, and 3) a goal-balancing process (GBP) to make a compromise between goals by using quantifiable indicators of the manufacturing system.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2008

There are some methods that have been used to manage a degasing process in recent years, such as an injection method that uses aluminum molten metal powder and chemicals supplier and input method that supplies argon and nitrogen, or chlorine gas by using a gas blow-tube. However, these methods show some problems, and it shows that it is a difficult process to handle, pollution due to producing a lot of toxic gases like chlorine and fluoride gas, irregular effects, and lowering work efficiency due to the excessive processing time. The problems that are the most fatal are the producing a lot of sludge due to the reaction of aluminum molten metal with chemicals, loss of metals, and decreasing the life of refractory materials. In order to solve these problems, this paper develops a technology that is related to aluminum continuous casting molten metal and monolithic degasing apparatus. A degasing apparatus developed in this study improved the existing methods and prevented environmental pollution with smokeless, odorless, and harmlessness by using a new method that applies argon and nitrogen gas in which the methods used in the West and Japan are eliminated. The method developed in this study decreases the molten metal processing and settling time compared to the existing methods and improves the workers' health, safety, and environment because there is no pollution in processes.