• Journal of electromagnetic engineering and science
• /
• v.4 no.2
• /
• pp.63-67
• /
• 2004

DAM(Delay-And-Multiplier) intercept receiver usually detects the symbol rate of the transmitted DS spread spectrum signal for the feature extraction. It is important for secure communication to reduce the normalized output signal-to-noise ratio that is generated at the DAM intercept receiver as a measure of detectability. In this paper, several kinds of chip waveforms are novelly analyzed for LPI(Low-Probability of Intercept) communication against DAM intercept receiver. Consequently, it is shown that the rectangular chip waveform shows the best LPI performance in the bandwidth of 2/$T_c$TEX>, 4/$T_c$TEX>, and 6/$T_c$TEX>/. Except the rectangular waveform, kaiser chip waveform show better LPI performance than the other waveforms in the bandwidth of 4/$T_c$TEX> and 6/$T_c$TEX>.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.2
• /
• pp.64-71
• /
• 2009

In this paper, This thesis is cell phone for make CAS service be for hand joining broadcasting Create a way CAS Chip. PerSam issue card inside use Seed Key and algorithm make CID Key and record CAS Chip. PerSam member Card inside use Seed Key and algorithm make Subscriber Key after include Subscriber. Key CAS Chip for record CID Key register EMM. make CAS CHIP in accordance with issue CAS Chip. broadcast service entry be for hand treatment so make low bandwidth for joining massage and make increase a member.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.410-411
• /
• 2006

High throughput analysis using a DNA chip microarray is powerful tool in the post genome era. Less labor-intensive and lower cost-performance is required. Thus, this paper aims to develop the multi-channel type label-free DNA chip and detect SNP (Single nucleotide polymorphisms). At first, we fabricated a high integrated type DNA chip array by lithography technology. Various probe DNAs were immobilized on the microelectrode array. We succeeded to discriminate of DNA hybridization between target DNA and mismatched DNA on microarray after immobilization of a various probe DNA and hybridization of label-free target DNA on. the electrodes simultaneously. This method is based on redox of an electrochemical ligand.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.763-768
• /
• 2005

Bare-chip packaging becomes more popular along with the miniaturization of IT components. In this paper, we have studied flip-chip process, and developed automated bonding system. Among the several bonding method, NCP bonding is chosen and batch-type equipment is manufactured. The dual optics and vision system aligns the chip with the substrate. The bonding head equipped with temperature and force controllers bonds the chip. The system can be easily modified for other bonding methods such as ACF In bonding process, the bonding forte and temperature are known as the most dominant bonding parameters. A parametric study is performed for these two parameters. For the test sample, we used standard flip-chip test kit which consists of FR4 boards and dummy flip-chips. The bonding test was performed fur two types of flip-chips with different chip size and lead pitch. The bonding temperatures are chosen between $25^{\circ}C\;to\;300^{\circ}C$. The bonding forces are chosen between 5N and 300N. The bonding strength is checked using bonding force tester. After the bonding force test, the samples are examined by microscope to determine the failure mode. The relations between the bonding strength and the bonding parameters are analyzed and compared with bonding models. Finally, the most suitable bonding condition is suggested in terms of temperature and force.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1041-1044
• /
• 1998

In this paper the cellular neural networks with annealing capability is designed. The annealing capability helps the networks escape from the local-minimum points and quickly search for the global-minimum point. A 6$\times$6 CNN chip is designed using a $0.8\mu\textrm{m}$ CMOS technology, and the chip area is 2.89mm$\times$2.89mm. The simulation results for hole filling image processing show that the general CNN has a local-minimum problem, but the annealed CNN finds the global-minimum solutions very efficiently.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.156-160
• /
• 1997

This paper proposed the vector controller of induction motors using one chip microprocessor. For developing a small and cheep speed control system, we use the one chip microprocessor 80C196MC. By using the one chip microprocessor we can make an inexpensive and small-sized vector controller for induction motors. We apply indirect vector control method and space vector modulation method to this system. The experimental results show that the proposed inverter has high performance features.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.103-106
• /
• 2005

This paper reports design and fabrication of CMOS temperature sensor circuit using MOSIS 0.25um CMOS technology. The proposed circuit has a temperature coefficient of $13mV/^{\circ}C$ for a wide operating temperature range with a good linearity. This circuit may be applicable to the design of one-chip IC where quartz crystal resonator is directly mounted on CMOS oscillator chips.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.2
• /
• pp.361-370
• /
• 1997

In this paper, we designed POCSAG Signal Decoder to improve operating time in pager. We showed POCSAG Signal Pattern sent by transmitter and operation of this decoder. We also showed that the Pager using this decoder was equipped with Wide Area Signal Detection and designed the hardware which realizes this operation and implemented it with ASIC chip. As we inspected the function of the ASIC chip and tested the performance, we could find that the chip operated in low voltage and that power dissipation was low.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2758-2760
• /
• 1999

ASIC chip design for motor control has been a subject of increasing interest since effective system-on-a-chip design methodology was developed. This paper investigates the design and implementation of ASIC chip for speed control of induction motor using VHDL which is a standarded hardware description language. The presented system is implemented using a simple electronic circuit based on FPGA.

• Proceedings of the Safety Management and Science Conference
• /
• 2002.05a
• /
• pp.221-225
• /
• 2002

Machinability improvement by the use of liquid nitrogen in cryogenic machining has been reported in various studies. This has been mostly attributed to the cooling effect of liquid nitrogen. However, No study has been found in discussion on whether liquid nitrogen possesses lubrication effect in cryogenic cutting. This paper presents lubrication mechanism related to chip microstructure. The friction reduction was further reflected In larger shear angle and less secondary deformation in the chip microstructures.