• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.377-379
• /
• 2001

Contamination flashover is responsible for insulator electrical failures. Particularly, in Korea, with its perennially dry spring, the first spring rain often cause serious line outages by forming a conductive liquid film on the insulator surface. Rainwater and fog are not normally conductive but unfortunately atmospheric dust deposited on the insulator surface contains soluble salts which may lead to bad condition of insulation by combining watery and salts. Transmission design engineers have used a contamination map drawn on the traditional paper map. But it is not convenient because it does not include the information of Geographic Information accurately. This paper explains the newly developed salt contamination map program using Geographic Information System, which provide accurate geographic information. The program is designed to use four parts of datum, salt contamination levels, 345kV & 154 kV transmission lines, power plants & substations and background map. The digital background map is composed of raster files, the others are done by vector map.

• 산업보건소식
• /
• no.47
• /
• pp.4-14
• /
• 1987

The authors investigated estimated amounts of salt intake of workers in manufacturing industries who consisted of 1,506 males in 6 manufacturing fields and 476 females in 3 fields in Pusan area using filter paper method which was developed recently. The obtained results were as follows; 1. Mean excretion amounts of urinary electrolytes were Na 200.7 mEq/l, K 44.2 mEq/l and Cr 1.12g/l in male and Na 190.2 mEq/l, K 44.0 mEq/l and Cr 1.10g/1 in female. 2. Mean daily salt intake amounts were 19.4g in male and l5.3g in female. 3. By the fields of manufacturing industries in male, workers in metal product field had the highest salt intake as 20.0g, and the following were workers in food and tobacco field as 19.7g, workers in textile, wearing apparel and leather field as 19.6g in order. 4. In female, workers in textile, wearing apparel and leather field had the highest salt intake as l5.7g and the next were workers in chemical, coal and rubber products field as l5.0g and workers in fabricated metal products, machinery and equipments as l4.3g, respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.429-431
• /
• 2019

Noise in image processing has a direct effect on the quality of the image, and adversely affects the processing of the system including algorithms such as image segmentation, edge detection, and image recognition. Therefore, noise reduction plays an important role in the preprocessing process. In this paper, we propose an efficient algorithm to remove noise in high density of Salt and Pepper noise. The proposed algorithm removes noise by gradually expanding the filtering mask according to the density of the noise, and shows excellent noise cancellation performance even in a high density region. In order to evaluate the performance of the proposed algorithm, we compared and analyzed the existing method and the proposed algorithm through simulation.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1362-1364
• /
• 1995

In this paper, the automatic device for measuring the salt contamination on insulators was developed. The device consists of electronic insulators, measuring system, monitoring system, and printer. It was shown that the level of salt contamination measured by the developed device is similar to that measured by the brush cleaning method. Therefore, the developed automatic measuring device can be used in field, in order to predict the cleaning time of insulators and prevent the failure due to the salt contamination.

• Nuclear Engineering and Technology
• /
• v.51 no.4
• /
• pp.1024-1031
• /
• 2019

The Molten Salt Fast Reactor (MSFR) with its liquid circulating fuel and its fast neutron spectrum calls for a new safety approach including technological neutral methodologies and analysis tools adapted to early design phases. In the frame of the Horizon2020 program SAMOFAR (Safety Assessment of the Molten Salt Fast Reactor) a safety approach suitable for Molten Salt Reactors is being developed and applied to the MSFR. After a description of the MSFR reference design, this paper focuses on the identification of the Postulated Initiating Events (PIEs), which is a core part of the global assessment methodology. To fulfil this task, the Functional Failure Mode and Effect Analysis (FFMEA) and the Master Logic Diagram (MLD) are selected and employed separately in order to be as exhaustive as possible in the identification of the initiating events of the system. Finally, an extract of the list of PIEs, selected as the most representative events resulting from the implementation of both methods, is presented to illustrate the methodology and some of the outcomes of the methods are compared in order to highlight symbioses and differences between the MLD and the FFMEA.

• Journal of Welding and Joining
• /
• v.32 no.4
• /
• pp.55-62
• /
• 2014

The use of light-weight Al alloys in the automotive industry is increasing to meet requirements for fuel efficiency and emission reduction. Joining Al alloy to the conventional steel sheet is also very important issue with the increased use of Al alloy, and several joining processes have been introduced to enhance joining strength between dissimilar metals. This paper deals with a galvanic corrosion in the dissimilar metal joining. Salt spray tests up to 2000 hours were conducted on a self-piercing rivet, spot welded, adhesive bonded and weld-bonded joints, and cross-sections and tensile shear strength according the salt spray duration were analyzed at every 500-hour. Self-piercing rivet joint had relative low initial strength but the joint strength did not change regardless of the salt spray duration. The strength of other joints (spot welded, adhesive bonded and weld-bonded joints) decreased with the increase of salt spray duration and the corrosion behaviour of each joint was discussed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.25 no.2
• /
• pp.67-75
• /
• 1983

The objectives of this paper were to measure the bond strengths of reinforced concrete in which the steel rods were coated with five different kinds of anticorrosion paints, and to compare their prevention effects in salt water. The paints used in the study were epoxy resin I . II . III, Z.R. P., and silicone resin, which were applied at rates recommended by the manufacturers. The bond strengths were measured on the 7-, 14-, and 28-th days after molding. Corrosion conditions of coated steel plate under fresh water, seawater, 10 % salt water, and 20% salt water, were inspected every month during four months test peoriods, respectively. The results obtained from tests are summarized as follows: 1. Paint-coating may reduce the bond strengths of reinforced concrete. Silicone resin paint showed some 20% reduction in the strength compared to those without the paint. However, the other paints seemed not to significantly affect the strength. 2. Picture analyses showed that epoxy resin I and II significantly prevented corrosion steel plates in seawater. Epoxy resin I and silicone resin coating did not do a good job in corrosion prevention. Z.R. P. paint was found to be moderate as preventive coating paint. 3. Varying soluble salt contents had little effects on the corrosion prevention of tested paints. 4. Epoxy resin I and II were found to be appropriate as a coating material to prevent the corrosion of steel rods in seawater. Z.R.P. may also be used for the purpose.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.11
• /
• pp.3719-3726
• /
• 2012

Formation of Z-DNA, a left-handed double helix, from B-DNA, the canonical right-handed double helix, occurs during important biological processes such as gene expression and DNA transcription. Such B-Z transitions can also be induced by high salt concentration in vitro, but the changes in the relative stability of B-DNA and Z-DNA with salt concentration have not been fully explained despite numerous attempts. For example, electrostatic effects alone could not account for salt-induced B-Z transitions in previous studies. In this paper, we propose that the B-Z transition can be explained if counterion entropy is considered along with the electrostatic interactions. This can be achieved by conducting all-atom, explicit-solvent MD simulations followed by MM-PBSA and molecular DFT calculations. Our MD simulations show that counterions tend to bind at specific sites in B-DNA and Z-DNA, and that more ions cluster near Z-DNA than near B-DNA. Moreover, the difference in counterion ordering near B-DNA and Z-DNA is larger at a low salt concentration than at a high concentration. The results imply that the exclusion of counterions by Z-DNA-binding proteins may facilitate Z-DNA formation under physiological conditions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.115-117
• /
• 2021

Currently, as IoT technology develops, monitoring systems are being used in various fields, and image processing is being used in various forms. Image data causes noise due to various causes during the transmission and reception process, and if it is not removed, loss of image information or error propagation occurs. Therefore, denoising images is essential. Typical methods of eliminating Salt and Pepper noise in images include AF, MF, and A-TMF. However, existing methods have the disadvantage of being somewhat inadequate in high-density noise. Therefore, in this paper, we propose an algorithm for determining noise for Salt and Pepper denoising and replacing the central pixel with an original pixel if it is non-noise, and processing the filtering mask by segmenting and averaging it in eight directions. We evaluate the performance by comparing and analyzing the proposed algorithms with existing methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.441-443
• /
• 2022

Currently, image processing is being used in various fields such as image analysis, image recognition, and factory automation according to the development of IT technology. Salt and pepper noise is generated due to various external factors in the process of acquiring or transmitting an image, which deteriorates the image quality. Therefore, noise removal to improve image quality is essential. Various methods have been proposed to remove salt and pepper noise, and representative examples include AF, MF, and A-TMF. However, the conventional filter has insufficient noise removal performance in a high-density noise environment. Therefore, in this paper, we propose an algorithm for estimating and processing the original pixel by using the modified distance weight filter only in the case of noise, and replacing the original pixel in case of non-noise after performing noise judgment. To evaluate the performance of the proposed algorithm, we compare and analyze it with existing algorithms using PSNR.