• The Journal of Information Technology
• /
• v.8 no.3
• /
• pp.51-56
• /
• 2005

In this paper, we describe a study on the relationship between spectral sensitization and photographic characteristics of color paper. The photographic emulsion used in this study is a green-sensitizing emulsion. U.V maximum absorption peak value of 9-phenyl-5,5'-diphenyl-3,3'-bis(3-sulfopropyl)benzoxazolo carbocyanine triethyl ammonium salt was observed 507nm, and wedge spectrograms maximum peak value of color paper added dye to photographic emulsion was shown 553nm. As compared with the absorption peak of the dye in methanol solution, the sensitizing peaks of 9-phenyl-5,5'-diphenyl-3,3'-bis(3-sulfopropyl)benzoxazolo carbocyanine triethyl ammonium salt have red shifts of 46nm. The photographic characteristics of green-sensitizing emulsion were obtained contrast(2.6), speed(48-57), fog(0.08). Therefore, benzoxazolo carbocyanine dye is of industrial importance as green-sensitizing dye in the spectral sensitization of photographic emulsion.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1359-1360
• /
• 2007

In this paper, it is described the characteristics comparison of LV insulated materials contaminated by the salt vaporization and the particulates. The contact angle of normal PVC is measured $75^{\circ}$ but its of PVC contaminated by the salt vaporization for 500 hours is measured $63^{\circ}$. The contact angle of normal bakelite is measured $66^{\circ}$ but its of bakelite contaminated by the salt vaporization for 500 hours is measured $44^{\circ}$. And the contact angle of normal acrylic resin is measured $65^{\circ}$ but its of acrylic resin contaminated by the salt vaporization for 500 hours is measured $60^{\circ}$. In the surface of insulated materials contaminated by the particulate, the contact angle is decreased. The surface of bakelite is not good as an insulator.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.814-817
• /
• 2004

Deterioration due to de-icer salt occurs in practice in concrete pavement, dike, barrier and similar structure. This paper reports the results of effect of de-icer salt on. durability of concrete structure in winter. To protect concrete structure from damage by de-icer salt in winter, the exposure test was performed using three countermeasures such as increase in design strength upto $350kg/cm^2$, application of ggbf slag powder, and concrete sealer. Of these, the method of increase in design strength upto $350kg/cm^2$ showed better durability for deterioration by de-icer salt.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.3
• /
• pp.130-135
• /
• 2001

In this paper, the distribution characteristics of salt contaminants with the distance from sea in East coast, from Sokcho to Pusan of Korea peninsula were investigated to evaluate the design standard of KEPCO. To get the equivalent salt deposit density(ESDD), conventional brush wiping method was used. As the measuring period is comparatively short, and the measuring interval is long to check the maximum value, acquired ESDD data is very lower than the recommended value in the standard. The measured data didn't follow normal distribution, so it should take the statistical treatment. Through normalizing method, we could get a reliable probability data. In the past investigation, the accumulation characteristics of Japan is consulted to set the criterion, but the climatic condition of Korea is different to Japan. With the comparison of precipitation data and some measured data for long tern accumulation, we could set appropriate accumulation factor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.179-181
• /
• 2018

Digital imaging equipment is used for a variety of purposes in a wide range of fields in society and is becoming an important element of the 4th industrial revolution. Imaging equipment data is exposed to noise from various causes, and this noise affects accuracy of the equipment, causing errors and lowering reliability. In the present paper, an algorithm based on directional effective pixels is proposed to effectively remove high-density Salt and Pepper noise. Conventional methods show that performance decreases as Salt and Pepper noise density increases. To the contrary, the proposed method has noise-removal performance superior to those of conventional methods, by performing de-noising which considers directional effective pixels even in a high-density Salt and Pepper noise environment. Experimental results show that the proposed algorithm is superior to the existing methods, and performance is verified through enlarged images.

• Nuclear Engineering and Technology
• /
• v.56 no.9
• /
• pp.3969-3980
• /
• 2024

Over the years, numerous evaluations of material attractiveness have been performed for conventional light water reactors to better understand the nature of the spent fuel material and its desirability for misuse at different points in the nuclear fuel cycle. However, availability of such assessments for newer, Generation IV reactors such as Molten Salt Reactors is rather limited. In the present study we address the gap in knowledge of material attractiveness for molten salt reactor systems and describe the nature of irradiated fuel salts which the nuclear safeguards community might be faced with in the near future as more and more such reactors enter commission and operation. Within the scope of the paper, we use a large database of simulated irradiated fuel salt isotopics (and other derived quantities such as gamma activity, decay heat, and neutron emission rates) developed specifically for a molten salt reactor concept in order to shed some light on possible weapons usability of uranium and plutonium present in the irradiated fuel salts. This has been achieved by proposing a new attractiveness metric that is better suited for quantifying attractiveness of irradiated salts from a model molten salt concept. The said metric has been computed using a database that has been created by simulating the irradiation of molten fuel salt in a concept core over a wide range of operational parameters (burnup, initial enrichment, and cooling time) using the Monte-Carlo particle transport code, Serpent. With the help of this attractiveness metric, the findings from this study have shown that in relative terms, molten salt spent fuel is more attractive than spent fuel produced by a conventional light water reactor. The findings also underscore the need for strengthened safeguards measures for such spent fuel. These results are expected to be useful in the future for regulatory authorities as well as for nuclear safeguards inspectors for designing a functional safeguards verification routine for irradiated fuel of such unique nature.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.343-345
• /
• 2017

In digital era image processing has been utilized in a variety of media such as TV, camera and smart phone. However, in the process of analyzing, recognizing, and processing image data, deterioration occurs due to various causes and Salt & Pepper noise occurs. Typical methods for removing such noise include SMF, CWMF, and SWMF. However, existing methods have a somewhat poor noise canceling characteristic in Salt & Pepper noise environment. Therefore, in this paper, we propose an algorithm to remove Salt & Pepper noise effectively by using bilinear interpolation method and median filter according to noise density of local mask. And using the PSNR(Peak Signal to Noise Ratio) it compared to the existing methods and their performance in order to determine the performance of the proposed method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.927-929
• /
• 2015

With rapid progress in digital technology, demand for multi-media imaging devices is increasing. But noise occurs due to various reasons during the process of acquiring, transmitting or processing the image data. Filters used to remove salt and pepper noise include CWMF and AWMF. In areas where the noise density is high, the removal of noise is undermined. This paper suggests an algorithm that preserves the edge while removing noise using spatial weighted.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.3
• /
• pp.165-170
• /
• 2019

Recently, modern society has come up with the importance of video processing as various imaging systems have developed. However, deterioration occurs in the process of transmitting, processing, and storing video data for various reasons. Deterioration will damage the original image, and the typical noise is Salt and Pepper noise. There are A-TMF, CWMF, and linear interpolation as the means to eliminate Salt and Pepper noise. However, these methods show somewhat poor noise abatement performance in high-density noise areas. Therefore, this paper proposes an algorithm to eliminate noise using modified linear interpolation. To prove the validity of the proposed algorithm, PSNR, Profile was used to compare it with existing methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.932-935
• /
• 2015

Recently, the image system is utilized in several fields due to the development of multimedia technology. However, the noise occurs according to various causes in the process of image data processing. The noises added to the image include several types according to the cause and shape, and the salt and pepper noise is one of the typical noise types. Thus, this paper proposed the median filter algorithm using the estimated mask in order to remove the salt and pepper noise effectively and also compared this algorithm with the current methods using PSNR(peak signal to noise ratio) as a criterion of judgment.