• 펄프종이기술
• /
• 제47권6호
• /
• pp.22-40
• /
• 2015

Cellulose fibers is one of the most abundant in nature. It has many distinctive features: abundant in nature, biodegradable, non-toxic, eco-friendly, sustainable, easy to fabricate, hydrophilic, and cost-effective. Cellulose fibers, known as pulp, is produced from cellulose-containing materials by the pulping process. As the raw material, wood has been most commonly used while recycled pulp has been also used to some degree. Thus, pulp usually refers to wood pulp. Generally, the pulp and paper industry is regarded as the commodity market where the cost should be much more important than the quality. It also belongs to a mature market where the growth is slow, or even in decline. Accordingly, technological development has been rather stagnant for the industry. Recently, however, the pulp and paper industry has faced very serious challenges. First, due to digital technology, there has been a steady decline in the need for pulp and paper products. The digital industry has continuously replaced printed products such as books, newspapers, and magazines. Second, there has been a trend initiated by developed countries to limit the use of wood as the raw material for the sake of environmental protection. This forces the industry to find a more efficient use of wood pulp as well as finding alternative, non-wood sources. Third, as an individual becomes wealthier and more conscious of health-care, the quality of a product becomes more important than the cost. Thus, a paradigm shift is needed from the cost-conscientious to the quality conscientious. The objective of this article is to review the technologies aimed at engineering cellulose fibers for producing high-value added paper products.

• 공학교육연구
• /
• 제19권2호
• /
• pp.97-101
• /
• 2016

This paper examines the industry field training education model, analyze the operational status proposed improvement measures. Data were analyzed using a field training participating students participating industry last three years. On the other hand analysis field training participating students increased, industry participation has decreased. And most of the students took part in the seasonal short-term job training. In addition, it was difficult to analyze the employment status field training operations follow-up member. In this paper, a field training operations support system management models and practical training courses organized field trips how to improve. Field training operations support will be strengthened through the work associated with the company expanding participation model introduced and is expected to increase in the long-term practical training, students participate in field training system improvement. Run the job training Improvement in future research presented in this paper attempts to analyze the students' employment status and results of operations involved.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.896-906
• /
• 2009

In Singapore, the construction industry's performance in safety has often been the worst among the other industries. This paper seeks to compare the efforts of the shipbuilding and repair industry and the construction industry in improving the level of safety performance. One key factor identified in the paper will be the subcontractors' role in the safety aspect. Based on the analysis of statistic carried out by the Ministry of Manpower of Singapore and many others, this paper aims to identify the success of the shipbuilding and repair industry and gives thought as to how the construction industry can further improve its safety record.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
• /
• pp.390-393
• /
• 1999

In this paper, a series of PAC (polyaluminum chloride) samples were prepared for rosin neutral sizing system. Some characters of PAC were discussed in detail. The experimental results show that it is possible to achieve neutral sizing when PAC is compounded with DRS (dispersed rosin size) instead of alum (aluminum sulfate).

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 춘계학술대회논문집
• /
• pp.310-320
• /
• 2007

• 펄프종이기술
• /
• 제44권2호
• /
• pp.1-7
• /
• 2012

Hanji made of mulberry fibers has the lower printability due to their long fiber length, the diffusible property of ink, and low smoothness. This study was carried out to analyze the physical and optical properties of machine-made Hanji controlled by the different contents of paper mulberry 20, 40, 60, 80 and 100%. In this study, the results of comparing machine-made Hanji controlled by the different contents of $Paper$ $mulberry$ with commercial paper and inkjet coated paper are as following: Tearing strength of machine-made Hanji is higher than domestic paper and inkjet coated paper. By increasing paper mulberry contents of machine-made Hanji appeared that tensile strength increased and smoothness gradually decreased. Printability of machine-made Hanji is less than domestic paper and inkjet coated paper. However, there were significant possibility to use for printing paper.

• 펄프종이기술
• /
• 제44권2호
• /
• pp.49-57
• /
• 2012

The reduction of greenhouse gas emission currently becomes more urgent task for Korean Industries, especially for the paper industries because of the new regulation based on the low carbon-green growth law. In order to reduce effectively the greenhouse gas emission, the development of greenhouse gas emission inventory has been widely considered as one of the basic processes and has been applied to many industries. In this study, the fundamental schemes and the cases of greenhouse gas inventories were investigated. Especially, the major considering units for paper industries were suggested to develope greenhouse emission inventory of paper industry.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2004년도 제30회 국제세미나
• /
• pp.135-154
• /
• 2004

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 춘계학술발표논문집
• /
• pp.41-42
• /
• 1999

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2001년도 추계학술발표논문집
• /
• pp.155-161
• /
• 2001