• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 봄 학술발표회논문집
• /
• pp.27-34
• /
• 1993

Precast large panel structures behave differently form frame and monolithic wall structures under external loads, because of the distinct planes of weakness in the horizontal and vertical joints between panels. These joints may slide and open during shaking, producing large localized changes in the bending and shear stiffness of individual walls. The structural behavior of large precast panel buildings depends on the relative strength and stiffness of the panels and joints. Special modeling are thus required for the analysis of precast panel connections. This study suggests a new analytical modeling and method to obtain the rational estimation of discontinuity and slip movements form the connections of precast large panel structures .

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1994년도 춘계학술대회논문집
• /
• pp.158-170
• /
• 1994

인간-기계 시스템이 점차적으로 복잡하고 거대해짐에 따라 인간-기계 계면(man-machine interface)에서의 인간은 근운동을 요하는 육체적 작업에서 경계(vigilance), 제어(control), 감시 (monitoring), 추적(tracking) 등 정신적 업무로그 역할이 전이되는 등 시스템내에서의 인적요소의 중요성이 더욱 증가되고 있다. 이러한 시스템내에서의 주된 계면은 표시장치(display)와 제어장치 (control)들이며, 이들에 대한 인간공학적 설계와 배치가 효율적인 인간-기계 계면의 중요한 설계 요인이 된다. 본 연구에서는 동일한 작업에 대해 서로다른 배치를 가진 4개의 컴퓨터 시뮬레이션 표시장치 panel 실험을 통하여 panel 제어 작업에서의 표시장치와 제어장치의 설계형태나 배치에 따라 발생하는 인적오류를 정량적으로 예측, 검출하는 것을 그 목적으로 한다. 그리고 각 panel에 따른 수행도 척도로서 작업수행시간(operation time)과 오류율(error rate)을 검출하고, 그 결과에 의한 인적 오류 예측모형을 제시하여 인적오류를 감소시키는 보다 나은 panel을 설계하는데 활용가능 하게 하고, 더 나아가서는 인간신뢰성 기법에 적용시킬 수 있도록 기초자료를 분석하고 제시하고자 한다.

• 한국태양에너지학회 논문집
• /
• 제30권2호
• /
• pp.10-15
• /
• 2010

The experimental study was conducted to optimize the system dissipating properly heat from the in-situ solar panel installed on the roof. For this purpose, six 12-Watt panels, which were consisted of the different design conditions such as containing phase change material(PCM), changing the array of the aluminum fin and honeycomb at the back of the panel, were tested. PCM, which had $44^{\circ}C$ melting point, was chosen in this study. In order to enhance absorbing and expelling heatin PCM, profiled aluminum fin was placed either inward oroutward from the panel. Furthermore, Aluminum honeycomb is imbedded in the back container to find if it would improve the thermal conductivity of PCM. During the experiment, there were ranged to $26^{\circ}C\sim32^{\circ}C$ for outdoor temperature and $700W/m^2\sim1000W/m^2$ for irradiance. As a result, the solar panel, combined with honeycomb and outward fins with PCM instead of placing the fins inward, is showing the best performance in terms of controling panel temperature and its efficiency.

• 한국정밀공학회지
• /
• 제26권11호
• /
• pp.116-123
• /
• 2009

The elastic properties of core affect mechanical properties and deformation behaviours of the lightweight sandwich panel. The objective of the present paper is to estimate experimentally Young's and shear moduli of a core in internally structured boned (ISB) panel with woven metal as inner structures using the deflection theory of sandwich beam considered core stiffness. Three points bending experiments were performed to obtain force-deflection curves of the designed ISB panel in each material direction. The elastic and shear moduli of the core in each material direction were estimated from slopes and intercepts of relationships between compliance per the span length and square of the span length, respectively. The results of the estimation showed that the fabric technology of the woven metal affects the variation of the elastic properties in the core. Through the comparison of shear moduli and force-deflection curves of the proposed method and those without considering the core stiffness, it was shown that the core stiffness should be considered to estimate properly the Young's and shear moduli of ISB panels. Finally, the contribution ratio of bending and shear deflections of ISB panels to the total deflection was quantitatively examined.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권12호
• /
• pp.43-52
• /
• 2020

This paper examines how macroeconomic variables, such as interest rate differences, inflation, exchange rates, economic growth and external debt growth, affect capital flight in the ASEAN-8 countries. We apply a panel data model with fixed effect estimation for the data for eight countries from the period 1994 to 2018. We use the residual approach used by the World Bank to measure the value of capital flight. The results show that the interest rate differences, exchange rates, economic growth and foreign debt growth had a positive and significant effect on outward capital flight. A further implication of this finding is that the interest rate differences, exchange rate, economic growth and foreign debt growth are factors that trigger an increase in capital outflow in the ASEAN-8 countries. Nonetheless, inflation rate is not considered to be the main factor influencing capital flight, as average inflation in the ASEAN-8 countries remains relatively stable. This paper will be beneficial for policymakers in the ASEAN-8 countries and encourage them to constantly pay attention to these four variables, as they significantly influence capital flight, whereas they can disregard the impact of the inflation variable that is not significant in influencing capital flight.

• 응용통계연구
• /
• 제19권3호
• /
• pp.521-534
• /
• 2006

횡단면 자료와 시계열 자료가 병합된 패널회귀모형을 다루는 대부분의 연구들에서 사용되고 있는 자료는 완전한 자료를 고려하고 있다. 그러나, 실제적으로 완전한 자료보다는 불완전한 자료가 많다. 이러한 상황을 고려하지 않고 통계적인 추론을 하게 되면 잘못된 결론이 도출될 수 있다. 따라서, 자료의 형태를 충분히 고려한 추정량을 바탕으로 자료를 분석해야 한다. 본 연구는 패널회귀모형에서 자료가 불완전 상태인 경우 최대 엔트로피 형식을 이용한 일반화최대엔트로피 추정량을 제안하고, 추정량들의 효율성을 모의실험을 통하여 비교하였다. 모의실험 결과, 일반화 최대엔트로피 추정량이 가장 안정적이고 효율적인 추정량임을 보여주었다.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권10호
• /
• pp.571-579
• /
• 2020

This paper examines how human capital and other economic variables, such as private investment, economic growth, government investment, inflation, and unemployment influence inequality in Indonesia's provinces. We apply panel data model with fixed effect estimation for the data of 34 provinces from the period 2013 to 2019. We develop a new index for human capital using the education index approach. The results show that human capital has a negative and significant effect on income inequality. An increase in human capital is related to an increase in knowledge and competence due to the longer average school year and expectations of the school year. Human capital has increased the possibility of a person being accepted into the job market and earning a higher income; hence, it lowers income inequality. We also find that inflation leads to a higher gap of income distribution. A further implication of this situation is that the rise in inflation causes an increase in low-income people, and as a consequence, makes their lives worse off. This paper will be beneficial for policy-makers for whom human capital, which is measured using an education index, is an important factor that significantly affects income inequality, in addition to other economic factors.

• 디지털융복합연구
• /
• 제12권7호
• /
• pp.261-266
• /
• 2014

시계열 모형에서 모수의 수가 많으면 모수추정에 따르는 오차가 커지게 되므로 예측을 하는데 많은 어려움이 있다. 만약 여러개의 시계열 자료들이 동일한 모형에서부터 얻어졌다고 하는 동질성 가설이 채택되면 모수축약을 이룰 수 있고, 더 좋은 예측값을 얻을 수 있다. 비선형 시계열 패널 자료는 각각의 시계열마다 모수들이 있기 때문에 매우 많은 모수가 존재하게되고, 모수의 수가 많으면 모수추정에 따르는 오차가 커지게 되어 예측의 정확도가 떨어지게 된다. 패널내에 존재하는 독립적인 여러 시계열들의 동질성이 만족되면 시계열을 종합하여 모수를 추정하고 검정할 수 있다. m개의 독립적인 비선형 시계열 패널 자료의 동질성 검정을 알아보기 위하여 모형을 설정하고 이 모형에 대한 정상성 조건을 구하였고, 동질성 검정통계량을 유도했으며, 구한 검정 통계량의 극한분포가 ${\chi}^2$ 분포를 따르는 것을 보였다. 실증분석에 있어서는 비선형 시계열 자료중 중선형 시계열 모형의 동질성 검정을 하고, 실제 우리나라 주식자료를 2개의 집단으로 나누어 비선형 시계열 패널 자료의 동질성 검정에 대한 분석을 하였다.

• The Journal of the Acoustical Society of Korea
• /
• 제23권1E호
• /
• pp.24-30
• /
• 2004

This study is aimed to evaluate a tunneling effect in the laboratory measurement of sound transmission loss. Based on the formulation for sound transmission loss of a finite panel in the presence of tunnel, variations of the sound transmission loss with the parameters of panel location and tunnel depth are investigated. In comparison with the transmission loss of a finite plate in an infinite rigid baffle, the maximum difference occurs in the laboratory measurement when the panel is placed at the center of the tunnel, while a better estimation of true transmission loss is obtained when the panel is located at either end.

• Communications for Statistical Applications and Methods
• /
• 제23권2호
• /
• pp.179-187
• /
• 2016

The fixed effects panel probit model faces "incidental parameters problem" because it has a property that the number of parameters to be estimated will increase with sample size. The maximum likelihood estimation fails to give a consistent estimator of slope parameter. Unlike the panel regression model, it is not feasible to find an orthogonal reparameterization of fixed effects to get a consistent estimator. In this note, a hierarchical Bayesian model is proposed. The model is essentially equivalent to the frequentist's random effects model, but the individual specific effects are estimable with the help of Gibbs sampling. The Bayesian estimator is shown to reduce reduced the small sample bias. The maximum likelihood estimator in the random effects model is also efficient, which contradicts Green (2004)'s conclusion.