• 대한화학회지
• /
• 제37권4호
• /
• pp.431-441
• /
• 1993

Acrylic acid, methacrylic acid, crotonic acid(A 그룹), 또는 3-butenoic acid 4-pentenoic acid(B group) 등이 배위된 bis(trimethylphosphine) 팔라듐(O) 착물에서 ${\pi}$-및 metallacycle의 안정한 구조와 반응성을 분자역학법과 확장분자궤도함수법으로 조사하였다. 올레핀의 HOMO 및 LUMO 계수가 큰 A 그룹 리간드는 ${\pi}$-착물이 안정화되고, LUMO 계수가 상대적으로 적은 B 그룹 리간드는 금속함유고리화합물이 안정하였으며, 특히, 3-butenoic acid에서는 6원고리 화합물보다 메틸기를 갖는 5원고리 화합물이 더 안정함을 알 수 있었다.

• 대한화학회지
• /
• 제37권6호
• /
• pp.599-603
• /
• 1993

Bis(1,2-diaminopropane)palladium(II)-Bis(oxalato)palladate(II)($Pd_2C_{10}H_{10}N_{4}O_{8}$)의 단위 착이온 및 결정의 구조들을 X-선 회절법으로 연구하였다. 이 결정은 사방정계이고 공간군은 $P_{ccn}$ (군 번호 = 56)이다. 단위세포 길이는 a = 16.178(5), b = 16.381(6), c = $6.685(2)\AA$이며 Z=4이다. 회절 반점들의 세기는 흑연 단색화 장치가 있는 자동 4축 회절기로 얻었으며 $Mo-K\alpha$ X-선(${\lambda}$ = 0.7107 $\AA)$을 사용하였다. 구조분석은 중금속법으로 풀었으며, 최소자승법으로 정밀화하였고, 최종 신뢰도 값들은 605개의 회절반점에 대하여 R = 0.065, $R_W = 0.059, R_{all}$ = 0.065과 S = 4.315였다. 착이온들은 근본적으로 평면구조로써, 이들의 충진구조는 마그누스 염형태의 구조가 아니라, 착음이온의 면간 중첩거리가 $3.343(5)\AA$인 일차원 정규 음이온원주를 형성하고 있으며, 그 주위를 착양이온들이 둘러싸고 있다. 두 가지 착이온들 사이의 면간 각은 $18(1)^{\circ}$로써, 질소 및 산소원자들 사이의 직접적인 거리가 2.94(3)와 $3.31(4)\AA$ 사이의 수소결합으로 음이온 원주 주위에 양이온들이 둘러싸고 있다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 추계학술발표회
• /
• pp.187-190
• /
• 2002

Reductive dechlorination of endosulfans was studied with zero valent metals (ZVMs) and bimetals in aqueous batch reactors. The effect of surfactants was evaluated. Endosulfan was successfully dechlorinated with zero valent iron. However, a bimetal, palladium coated iron (Pd/Fe) showed a highly enhanced reactivity for both endosulfan I and II indicating palladium act as a dechlorination catalyst on the iron. The effect of surfactants on degradation with ZVM has been very controvertible. Variable concentration of a nonionic surfactant, Triton X-100 and an anionic surfactant, SDS were added into the reactor with ZVM. The reaction rates of endosulfan were increased with both surfactants. In the case of Triton X-100, the reaction rate was increased with the increasing surfactant concentration up to 400 mg/L. Addition of small amount of surfactant under the CMC, the reaction rate was increased. However, the enhancing effect was diminished when a higher concentration of surfactant (1,000 mg/L) was used. Current study implicate that the surfactant adsorbed on the metal surface might increase the surface concentration of endosulfan resulting in the increased reaction rate. However, partitioning of endosulfan into the micelle formed at the high concentration of surfactant diminish the enhancing effect by reducing the contact chance between target compound and the metal surface.

• 대한치과보철학회지
• /
• 제34권3호
• /
• pp.475-488
• /
• 1996

The opaque porcelain layer of porcelain-fused-to-metal(PFM) restoration is critical for the success of PFM restoration because it is the first layer placed over the treated alloy. But, the methods of opaquing technique have not been confirmed. Usually, the one layer method and two layer method have been used for the application of opaque porcelain. In the past, alloys with porcelain veneers which have been used successfully have contained various precious metals. Recent increase in the cost of precious metals stimulates considerable interest in nonprecious alloys. Although nickel-chromium alloys and nickel-chromium-beryllium alloys have been widely used, the use of cobalt-chromium alloys would be gradually increased with elimination of any potential risk of nickel-related allergic responses and/or beryllium-related toxic responses. This investigation examined one- and two-layer opaque porcelain applications to determine the effect on the bond strength of titanium added cobalt-chromium metal ceramic alloy. Bond strength of Ceramco II porcelain to titanium added cobalt-chromium alloy(2Dentitan) and gold-platinum-palladium alloy(Degudent H) were evaluated by direct shear bond strength test with Instron universal testing machine. The results were as follows; 1. When the mean shear bond strength of each experimental group were compared in $0.25cm^2$ unit area, the titanium added cobalt-chromium alloy/two layer method exhibited the greatest strength(79.7kg), followed by titanium added cobalt-chromium alloy/one layer method(76.2kg), gold-platinum-palladium alloy/two layer method(71.4kg), gold-platinum-palladium alloy/one layer method(64.2kg). 2. No significant differences in bond strength were recorded between the two opaquing techniques for gold-platinum-palladium alloy and titanium added cobalt-chromium alloy. 3. No significant differences in bond strength were recorded between the gold-platinum-palladium alloy and the titanium added cobalt-chromium alloy.

• Bulletin of the Korean Chemical Society
• /
• 제32권6호
• /
• pp.1884-1890
• /
• 2011

A series of Ni(II) and Pd(II) complexes bearing N4-type tetradentate ligands, [Ni($X^1X^2$-6-$Me_2bpb$) 1] and [Pd($X^1X^2$-6-$Me_2bpb$) 2]; 6-$Me_2bpb$ = N,N'-(o-phenylene)bis(6-methylpyridine-2-carboxamidate), $X^1$ = Cl, H, or $CH_3$, $X^2$ = $NO_2$, Cl, F, H, $CH_3$, or $OCH_3$) were designed, synthesized, and characterized to investigate electronic and steric effects of ligand on the norbornene polymerization catalysts. Using modified methylaluminoxanes as an activator, the complexes exhibited high catalytic activities for the polymerization of norbornene and the nickel complexes exhibited better catalytic activity the palladium complexes. Ni complex 1a with $NO_2$ group on the benzene ring showed the highest catalytic activity of $4.9{\times}10^6$ g of PNBEs/$mol_{Ni}{\cdot}h$ and molecular weight of $15.28{\times}10^5$ g/mol with PDI < 2.30. Complexes with electron-withdrawing groups are more thermally stable (> 100 $^{\circ}C$), and tend to afford higher polymerization productivities than the ones having electron-donating groups. Amorphous polynorbornenes were obtained with good solubility in halogenated aromatic solvents. A vinyl addition mechanism has been proposed for the catalytic polymerization.

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3641-3649
• /
• 2022

A simple solvothermal reaction was used to prepare a 3-aminopropyl-functionalized silica-gel-based adsorbent for adsorbing Pd(II) from the nitric acid solution. Scanning electron microscopy, fourier transform infrared spectroscopy, and thermogravimetry analysis were performed on the as-synthesized adsorbent to demonstrate the successful introduction of Schiff base groups. Batch experiments were used to investigate the effects of contact time, nitric acid concentration, solution temperature, and adsorption capacity. It is worth noting that the prepared adsorbent exhibited a higher affinity toward Pd(II) with the uptake approximately 100% even in a 2 M HNO₃ solution. At an equilibrium time of 5 h, the maximum adsorption capacity of Pd(II) was estimated to be 0.452 mmol/g. The adsorbed Pd(II) could be completely eluted by dissolving 0.2 M thiourea solution in 0.1 M HNO₃. Using a combination of particle-induced X-ray emission analysis and an X-ray photoelectron spectrometer, the adsorbed Pd was found to be uniformly distributed on the surface of the prepared adsorbent and the existing species were Pd(II) and zero-valent Pd(0). Due to the desirable performances, facile preparation method, and abundant raw material source, the prepared adsorbent demonstrated a high application potential in the recovery of Pd(II) from simulated high-level liquid waste treatment.

• Bulletin of the Korean Chemical Society
• /
• 제29권12호
• /
• pp.2533-2536
• /
• 2008

• Bulletin of the Korean Chemical Society
• /
• 제32권spc8호
• /
• pp.2881-2882
• /
• 2011

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2611-2612
• /
• 2014

• Bulletin of the Korean Chemical Society
• /
• 제31권1호
• /
• pp.238-241
• /
• 2010